Accessories
-
Mobile Mark Halfwave Antenna Encased In Plastic Radome - 824 MHz to 894 MHz, 1850 MHz to 1990 MHz, 870 MHz to 960 MHz, 1710 MHz to 1880 MHz, 806 MHz to 870 MHz, 1850 MHz to 1990 MHz, 2400 MHz to 2485 MHz, 2.4 GHz to 2.5 GHz, 4.9 GHz to 6.0 GHz - 2.5 dBi -
These antennas are designed for covert use in any type of embedded/surface application such as ATM machines, remote credit card processing, wireless kiosks, telemetry radios, and in non-metallic metal NEMA boxes.
These antennas operate on dual band configurations and can be used for Cellular GSM/CDMA modem applications. Models are also available for ISM 915 MHz modems. Models are available for 2.4 GHz WiFi (802.11 b/g) and dual-band 2.4/5 GHz (802.11n).
These antennas are compact, yet provide 2.5 dBi gain performance. The antennas are ground plane independent and can be mounted in a variety of locations. They can be installed behind rearview mirrors, under a dashboard or rear window deck/shelf. Since they are thin, they can also fit into the molding of vehicles, surface or subsurface mount in various electronic equipment.
The CVS antennas are weather resistant with a dust/water ingress rating of IP67. They are provided with double sided tape and a mounting clip for standard installation applications. They can be installed without the mounting clip by simply using the double sided tape.
When mounting the antenna, care should be taken to ensure the antenna is positioned so that no metal or metallized finish obstructs the radiation pattern of the antenna.
Learn More
The CVS series is housed within a black ASA rugged radome and is provided with 8 ft of RG-174 cable (2.5 meters). Models are typically outfitted with SMA Plug (Male) connectors. Other connectors are available upon request.
The CVS series is also available with an integral GPS antenna in a slightly larger package. -
Mobile Mark ECO9-5500-BLK Antenna - 5.0 GHz to 6.0 GHz - 9 dBi - Indoor, Outdoor, Wireless Data Network - Black - Pole/Wall - Omni-directional - N-Type Connector
Mobile Mark's ECO Omni antennas are designed for all new data & broadband systems, including WiFi 802.11 systems. Using the latest PCB technology, these antennas improve high-speed broadband system performance in an economical package.
Learn More
The ECO Series are free space antennas; no ground plane is required. Standard hardware includes pole/wall mount.
The antenna element is enclosed in a tough white or black fiberglass radome.The antenna terminates with an integrated N-female. A "PT" pigtail cable option also provides a direct coax into the antenna and can be outfitted with a variety of connectors, such as Reverse Polarity TNC or SMA. For direct male N mounting, series "RN" can be chosen.
These antennas can withstand the harshest outdoor environments, yet are quite attractive for indoor use. -
Mobile Mark Magnetic Mount GPS Antenna - 1575.42 MHz - 26 dB - GPS - Black - Magnetic Mount - SMA Connector
Mobile Mark's GPS Magnet Mount Antennas complements MobileMark's full range of GPS Mobile antennas with a convenient and portable mounting option. The magnet mount style allows the antennas to be moved from from car-to-car, and its small size makes it easy to transport.
The antenna design is very small, less than 2 inches (5 cm) overall,but still contains a small powerful magnet. The magnet can be attached to the roof, hood or trunk of any metal vehicle or flat surface. The cable would then be routed to the GPS receiver, typically through a vehicle window.
The antenna provides durability and weatherproofing, using a sealed polycarbonate case. When not in use, the antenna can easily be removed.
Although the antenna could be mounted on any surface, the antenna should ideally be placed on metal at least 5" (127 mm) across. This will provide the maximum GPS operation.
GPS performance is provided by a 26 dB low noise amplifier, with 5dBi of antenna gain. Power required for the GPS amplifier is either2.7 or 5 VDC. The power is supplied through the cable along with the GPS signal. Most GPS receivers will provide the needed power for the amplifier circuit without modifications.The antenna is rated IPx5 for water ingress protection. The standard cable supplied with the Magnet Mount antenna is 10 feet (3 meters)of RG-174. Standard connector supplied is an SMA Plug (Male).
Learn More
Different connectors can be supplied if requested, please consult your sales representative for availability.
Additional Mobile Mark GPS antennas include Surface Mount and Window Mount.
MultiBand antennas that combine GPS with other wireless applications are also available in a wide variety of mounting styles including additional Mag-mount options. -
Mobile Mark Antenna - 824 MHz to 894 MHz, 1850 MHz to 1990 MHzSMA Connector
Mobile Mark Antenna - 824 MHz to 894 MHz, 1850 MHz to 1990 MHzSMA Connector Learn More -
Mobile Mark Antenna - 1575.42 MHz - 26 dB - GPS - Black - Surface Mount - SMB Connector
Mobile Mark Antenna - 1575.42 MHz - 26 dB - GPS - Black - Surface Mount - SMB Connector Learn More -
Mobile Mark RMM-UMB-DN-BLK Antenna - 750 MHz to 1250 MHz, 1650 MHz to 2700 MHz - 5 dB - Cellular Network - Black - Surface/Magnetic Mount - SMA, N-connector Connector
These antennas complement Mobile Mark's broad line of antenna products for Cellular applications.
Learn More
The RM3 Dual Band is a medium profile (3" H, 76 mm) antenna with performance of 3 & 5 dBi max (frequency dependent). A ground plane is required to maximize gain. The antenna radome consists of black ASA UV resistant plastic, with a heavy duty metal base and threaded feed thru, or a direct N version is also available.
The bottom of the RM series is outfitted with a gasket for complete sealing. A mounting nut is provided. Magnetic mount versions, MGRM-900/1900 allow use without drilling a hole.
The RMM-UMB is a broadband version capable of simultaneous operation on worldwide bands from 750 MHz up to 2.7 GHz, with excellent response.
A direct N version is also available along with the standard surface mount.
Note: Groundplane required for optimal performance.
