Alarms & Locks
-
Crestron Room Availability Status Indicator, Wall Mount - Wired - 24 V DC - Visual - Wall Mountable, Surface Mount, Box Mount - Red, Green - White
With just a glance down the hallway, the SIW-100 status indicator provides highly-visible indication of a room's availability as part of a complete Crestron® enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The clear acrylic lens glows bright green or red to indicate room availability. The complete assembly mounts to the wall over a single-gang electrical box or plaster ring.
Room Availability Status
For room scheduling applications, the SIW-100 simply connects via USB to a Crestron TSS-770, TSS-1070, TSW-770, TSW-770-GV, TSW-1070, or TSW-1070-GV series touch screen. No special programming or configuration is required. The indicator color is controlled by the room scheduling application, which runs on the touch screen and syncs with Crestron Fusion® or another room scheduling service. The indicator illuminates green when the room is available and red when the room is occupied.Custom RGB Colors
For custom applications, the SIW-100 can be integrated with a Crestron control system and programmed to illuminate in a wide variety of colors. Its RGB LEDs can be controlled in 10% increments per color. When powered by USB, any single color LED can be used at full brightness, while if connected via Cresnet two color LEDs can be used at full brightness simultaneously. Three color mixing is possible when powered by Cresnet if each LED is limited to 70%. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired. Control system integration can be accomplished through a USB connection to a TSW-770(-GV) or TSW-1070(-GV) series touch screen, or through a Cresnet® connection to the control system.Simple Installation
Installing the SIW-100 is simple. It mounts to the wall over a standard 1-gang electrical box or plaster ring. Power and communications are supplied by a single USB or Cresnet wire. A six foot (1.83 meter) USB cable is included, which connects to the touch screen mounted below. Alternately, a Cresnet cable (sold separately) can be run to a control system up to 3000 feet (914 meters) away. Cresnet allows for daisy-chaining multiple status indicators using a single cable.Mullion Mounting Option
Learn More
When a suitable wall surface is not available, the SIW-100 can be mounted to the mullion of an interior glass wall, window, or partition using the optional SSW-MUMK Mullion Mount Kit (sold separately). The same kit may also be adhered directly to the glass or any other smooth surface.$224.04 -
Crestron TSW-1070-LB-W-S Light Indicator - Wired - Visual - Surface Mount - Red, Green - White
The Crestron® TSW-1070-LB is a room availability light bar designed for use withTSW-1070orTSS-1070series touch screens. The TSW-1070-LB provides a 180° visual indication of a room's availability as part of a complete enterprise room scheduling solution. The TSW-1070-LB mounts easily to the rear of the touch screen and illuminates bright green or red to indicate the room availability status, with options for custom color mixing and programming. The TSW-1070-LB features a clean, stylish appearance and vivid color illumination that complement any corporate office environment, and it is energy efficient at less than 2 W power consumption.
Room Availability Status
For room scheduling applications, the TSW-1070-LB simply connects to the touch screen via USB and requires no special programming or configuration.1 The illumination color is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion® software or another room scheduling application. The TSW-1070-LB illuminates green when the room is available and red when the room is occupied. It can also blink to indicate an emergency message broadcast from Crestron Fusion.
Custom RGB Color Mixing
For custom applications, the TSW-1070-LB can be configured to illuminate in almost any desired color. The TSW-1070-LB features tricolor RGB LEDs that allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments. Custom RGB color mixing is performed either through the touch screen directly or via custom control system programming. A Crestron control system connected to the touch screen can be programmed to support various functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.
Versatile Mounting Options
The TSW-1070-LB is compatible with various TSW-70 series mounting solutions to support installations common for room scheduling touch screens, including the TSW-70-UMB universal mounting bracket, the TSW-1070-MSMK multisurface mount kit, and the TSW-770/1070-MUMK mullion mount kit.
Key Features
- Provides a 180° visual indication of a meeting room's availability for TSW-1070 or TSS-1070 series touch screens
- Features a stylish appearance designed to complement corporate office environments
- Illuminates vivid green or red to clearly indicate room status
- Supports RGB color mixing to allow for almost any color illumination
- Energy efficient at less than 2 W power consumption
- Mounts easily to the rear of the touch screen
- Single-wire USB connectivity
- Compatible with various in-wall, multisurface, and mullion mounting accessories
- Available in smooth black or white finish
Learn More$300.00
