Relays
-
Tripp Lite Programmable Relay I/O Card for Tripp Lite SVTX, SVX and SV UPS Systems
The RELAYCARDSV Programmable Relay I/O Card is a contact-closure management accessory card compatible only with Tripp Lite SVTX, SVX and SV Series 3-phase UPS systems. It is ideal for providing contact closure output communications for IBM server, PC and workstation equipment and auto-controlled industrial equipment and communications applications. It lets you communicate UPS system status and events via six contact closure outputs. Each output relay can be configured as either Normally Close or Normally Open. You can also configure the input signal to perform remote UPS system shutdowns or battery tests. Relay contacts report UPS alarm, utility failure, UPS on-line mode, low battery, bypass mode and UPS failure. The RELAYCARDSV is simple to install in Tripp Lite SmartOnline® SVTX 400V non-modular, SVX 400V modular or SV 208V modular UPS system. A six-foot DB9 cable is included for connecting the UPS system to equipment for remote monitoring and control.
Learn More$277.68 -
AtlasIED Zone Page Powered Relay Pack 6 Relays
The Model PSR-206 is a zone page, powered relay-pak with an internal power supply. The unit is completely wired and ready for mounting. The power supply is capable of delivering 500 mA at 24 VDC. A fuse is used for extra protection. The output of the power supply is terminated at the terminal strip as well as internally to the relay coils. This allows the use of excess power supply capacity for external relays.
Learn More
Six 24 VDC, DPDT relays are pre-mounted and wired to the power supply. The contacts are of silver, gold plated and the contact rating is 3 amps. The coil current is a nominal 35mA. The relays are wired and terminated. The terminals are easily identified by a silkscreened diagram. Any relay may be easily converted to an 'all page' relay by connecting the off bus to the selected relay-switch output. Note: Allows for 5 zones, plus "All Call" , or 6 zones without "All Call".
Model PSR-206. Is a completely enclosed in a compact 18-gauge CRS chassis finished in black epoxy. It features a 6 ft. power cord. It is designed to be used with AtlasIED Model MPC Series modular paging communications center.$608.59 -
Vertiv Liebert IntelliSlot Relay Card - Remote Monitoring Adapter - Data Center Monitoring | Adapter | Hot-swappable | 24VAC/VDC at 1A
The Vertiv Liebert IntelliSlot Relay Card (IS-RELAY) provides contact closure for remote monitoring of alarm conditions in UPS systems with an IntelliSlot communication port. The card delivers proactive data center monitoring on 6 alarm points (On Battery, On Bypass, Low Battery, Summary Alarm, UPS Fault and On UPS signals). This advanced power-management device is designed to function in units with a Vertiv Liebert IntelliSlot port. These include Vertiv Liebert NX UPS, Vertiv Liebert Nfinity UPS and Vertiv Liebert GXT3 UPS. The relay card is easy to integrate with other relay contact monitoring systems. It is rated for 24VAC/VDC at 1A. It communicates with the Vertiv Liebert MultiLink automated shutdown software for UPS monitoring, full event management and automated shutdown protection. The card can be installed fast and easy by your onsite personnel. It is hot-swappable, so you do not have to shut down the system when installing.
Learn More -
Furman PS-REL Relay
The PS-REL AC Relay provides an alternate way of closing switch contacts. Instead of being operated manually like the RS-1, it is a relay that detects the presence of AC power and, in response, closes relay contacts that are wired to a terminal strip. It may be used with any of the Furman products mentioned in connection with the RS-1.
A PS-REL is useful in determining when a certain outlet has come on after a sequenced delay, to extend that outlet's capacity. It may also be used to extend the capacity of the switched outlet found on many home theater receiver/amps. In this way, a wireless remote can turn on the receiver, which in turn powers its switched outlet, which triggers the PS-REL, which then activates a Furman PS-8R or PS-PRO Power Sequencer, MiniPort, or PowerPort system capable of switching many large power amps or other power-hungry equipment in multiple locations.
Learn More -
AXIS External IP Relay - 1 Output, 1 Input - RJ-45 - Intercom System
Do you need an intercom to switch on lights or call a lift, but the switched devices are far away and laying cables all the way to the intercom isn't an option? Use an external IP relay, which is controlled using HTTP commands from a 2N IP intercom or access unit. The command is sent to the relay in unsecured form. You can also use the IP relay input. Connect an exit button, for example, to switch the output locally.
Learn More$253.25 -
2N Relay
2N Relay Learn More$110.00
