Power Equipment

The ComNet™ PS-AMR Series offer a complete range of high quality, low noise switching mode power supplies of various output sizes ideally suited to the entire ComNet industrial product range that require either 12 or 24VDC power input. These rugged units are DIN rail mountable, providing an ideal mounting configuration to a mating ComNet industrial switch or any product using our range of DIN rail mounting adapters. The wide ambient operating temperature range permits installation in most out of plant and unconditioned environments, such as those found in intelligent transportation systems or factory automation/industrial control applications. Unconditional line and load protection is provided.

The ComNet™ PS-AMR Series offer a complete range of high quality, low noise switching mode power supplies of various output sizes ideally suited to the entire ComNet industrial product range that require either 12 or 24VDC power input. These rugged units are DIN rail mountable, providing an ideal mounting configuration to a mating ComNet industrial switch or any product using our range of DIN rail mounting adapters. The wide ambient operating temperature range permits installation in most out of plant and unconditioned environments, such as those found in intelligent transportation systems or factory automation/industrial control applications. Unconditional line and load protection is provided.

The ComNet CNGE1IPSXXAC series consists of industrial Power over Ethernet midspan injection modules that inject 50-57 VDC at to any network cable. Operating power and 10/100/1000TX Ethernet data are easily combined on one cable, eliminating the need to install additional power outlets and electrical cabling. The CNGE1IPS95 is fully compliant with the requirements of IEEE 802.3at for Power Sourcing Equipment (PSE), and features auto detection of powered devices (PDs). Transmission distances of up to 328 feet (100 meters) are supported, and this injector supplies operating power for PDs drawing a maximum of 75 and/or 95 watts (model dependent). Ideally suited to fiber optic, wireless, or other networks where it may be difficult to furnish operating power to the PDs, the CNGE1IPSXXAC series offers a true plug-and-play product requiring no user configuration or other set-up.

The ComNet PS-DRA Series offer a complete range of high quality, low noise switching mode power supplies of various output sizes ideally suited to the entire ComNet industrial product range that require 48VDC power input. These rugged units are DIN rail mountable, providing an ideal mounting configuration to a mating ComNet industrial switch or any product using our range of DIN rail mounting adapters. The wide ambient operating temperature range permits installation in most out of plant and unconditioned environments, such as those found in intelligent transportation systems or factory automation/industrial control applications. Unconditional line and load protection is provided.

Features for PS-DRA100-48A

• Auto Select 115/230 VAC Input Voltage
• Designed for standard 7.5 or 15 mm DIN rail mount installations
• Adjustable output voltage range support
• High operating efficiency; up to 88%
• Compact form-factor saves space in those installations where space may be at a premium.
• No fans or forced-air cooling; cooling via natural convection eliminates unreliable and troublesome fans/moving parts, with no periodic maintenance requirements.
• Wide operating temperature range
• 3 Year Warranty

Applications

• Power Supplies for ComNet Industrial Products

The ComNet NWPM(XX)48GE DC-to-DC Power over Ethernet (PoE/PoE+) midspan injection modules inject up to 56VDC at 0.625 amperes to any network cable. These DC to DC injection modules are ideal for applications that require 802.3af and 802.3at Power over Ethernet from a 12, 24, or 48 VDC voltage source. Operating power and 10/100/1000T(X) Ethernet data are easily combined on one cable for solutions that require up to 56VDC to the Ethernet cable. The Power Injector has two isolated inputs for connecting 2 power sources. Transmission distances of up to 328 feet (100 meters) are supported. The units have power outputs up to 35W on Ethernet pins 4,5(V+) and 7,8(V-). These DC-to-DC midspan injectors provide line and powered device overvoltage and short circuit protection. Ideally suited for battery powered systems where AC power is not available. The NWP(XX)48GE is a true plug-and-play product requiring no user configuration or other setup.

Features for NWPM(XX)48GE Series

• Easily combines operating power and 10/100/1000T(X) Ethernet data to one network cable
• Internal 9 to 36, 18 to 36, and 36 to 72 VDC input power supply provides short circuit protection for powered devices
• Designed for deployment in industrial -25? to +65? C operating environments.
• Rugged, compact package for installation where space may be limited
• Ease of installation & true plug-and-play operation: no user configuration or settings required
• Unit can be wall mounted or DIN rail mounted using the included adaptor kit
• 5 Year Warranty

Applications

• Remote operating power for IP CCTV cameras for security and surveillance systems
• Remote operating power for Voice over IP (VoIP) telephony networks
• Remote operating power for wireless LAN access points
• Industrial Security, Transportation/ITS, and Industrial Control/Factory Automation IP Networks

The ComNet™ PS-MORD Series of industrial grade power supplies includes a complete range of high quality, low noise switching mode power supplies ideally suited for use with ComNet devices that require 12, 24, or 48 to 55 VDC for primary operating power.

Purpose Built Professional Security

The ComNet PS-MORD Series of industrial grade power supplies includes a complete range of high quality, low noise switching mode power supplies ideally suited for use with ComNet devices that require 12, 24, or 48 to 55 VDC for primary operating power. A summary fault relay is built into the 48 V DC models. These rugged units are mountable to standard 35 mm DIN rail - DIN 3 or TS-35 DIN rail of either profile - standard top hat, 7.5 mm depth (TS-35 x 7.5) or the high hat, 15 mm depth (TS-35 x 15).

Each power supply is designed with output short circuit protection, over current protection, and overvoltage protection. The wide ambient operating temperature range permits installation in most out of plant and unconditioned environments, such as those found in intelligent transportation systems or factory automation/industrial control applications. Unconditional line and load protection is provided.

The ComNet™ PS-MORD Series of industrial grade power supplies includes a complete range of high quality, low noise switching mode power supplies ideally suited for use with ComNet devices that require 12, 24, or 48 to 55 VDC for primary operating power.

Purpose Built Professional Security

The ComNet PS-MORD Series of industrial grade power supplies includes a complete range of high quality, low noise switching mode power supplies ideally suited for use with ComNet devices that require 12, 24, or 48 to 55 VDC for primary operating power. A summary fault relay is built into the 48 V DC models. These rugged units are mountable to standard 35 mm DIN rail - DIN 3 or TS-35 DIN rail of either profile - standard top hat, 7.5 mm depth (TS-35 x 7.5) or the high hat, 15 mm depth (TS-35 x 15).

Each power supply is designed with output short circuit protection, over current protection, and overvoltage protection. The wide ambient operating temperature range permits installation in most out of plant and unconditioned environments, such as those found in intelligent transportation systems or factory automation/industrial control applications. Unconditional line and load protection is provided.

The ComNet™ PS24AC12DC power converter supplies 12V DC regulated power to a select group of ComNet™ stand-alone units. The PS24AC12DC has a 300mA output current.