Power Equipment

DC-DC power converter for FlexPoint media converters. Converts 18-60VDC to 9VDC. Attaches to media converter enclosure.

Manage power in one place.

These hubs provide up to eight or sixteen power outputs in one place. The power distribution units feature a single power supply with an optional secondary, to deliver full power redundancy. The Central Power Hub (CPH) supports 5VDC or 12VDC devices in a 1U chassis for convenient rack mounting. It provides power to grow your installation on demand.

The power output ports are lockable, preventing accidental disconnects. Each output is limited to 20 Watts at 12V.

Hot swappable power modules.

The chassis can supply two 460W power modules slot into the back of the Power Hub chassis. Conversion from the mains AC supply to DC voltage occurs within these modules. In situations where redundancy is required, the Power Hub will equally balance a normal load between them. In the case of one module ceasing operation, the Hub automatically transfers the full load to the remaining module, which can easily handle the needs of up to 8 respectively 16 ports.

Protection.

Power integrity, safety, and management are at the heart of the Central Power Hub system. At start-up, the CPH automatically checks the validity of the power modules. It then enables each power output in sequence so they are do not overload the modules by starting simultaneously. As the system provides steady power to your installation, protections are in place to ensure against excess demand by anyone connected device.

Remote management.

The Central Power Hub can be controlled and monitored by a web interface. Temperature, fan speeds, and current measurements are viewable. Each output can be individually controlled.

• Support for dual power supplies for redundancy, unit comes with one power supply.
• Supports eight or sixteen 5VDC or 12VDC devices in a 1U chassis for convenient rack mounting.

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device.

The external AC power supply takes mains power and converts it to 12 VDC 5 A regulated power to supply power for the gang switch chassis, two external power supplies can be used to provide redundant power. Controller Cards take up only one slot, and external power connects to the controller card, One slot is reserved for future use, leaving you with 16 slots for A/B Switch Cards. All switch cards take up one slot except for the power A/B cards which take up two slots. Manage access to networks, implement backup systems for network and computer connections or share peripherals and other equipment. Local features include LED status and manual switching. Remote control (dry contact closure, RS232 and Ethernet) provides unmatched management flexibility. Gang Switch systems are used around the world to add secure access control and reliable backup for critical systems from space launch centers to stock exchange networks. Ordering instructions First, order the chassis... Gang Switch, 4U, 18-Card (SM960A) Next order at least one power supply (order two for redundancy)... External Power Supply 100- 240 VAC (SM961-PS) Internal Power Supply -48 VDC (SM760-PS1) Internal Power Supply Dual -48VDC (SM760-PS2) then select a Controller Card... Ethernet (SNMP) (SM962A) Logic Only (SM964A) ...next choose your A/B Switch Cards... Serial DBxx : DB25 A/B Non-Latching (SM965A) DB9 A/B Non-Latching (SM966A) DB15 A/B Non-Latching (SM967A) Power: 240 VAC 1 in 2 out (SM971) 120 VAC 2 in 1 out (SM973) Video: 75 ohm F-Connector (SM976A) Multimode: SC Latching (SM977A-SC) ST Latching (SM977A-ST) RJ45 Copper: CAT5e Non-Latching (SM978A) CAT6 Non-Latching (SM979A) This product works with: Power Supply (SM961-PS) A/B Switch Cards (SM965A, etc.)

Product Highlights

• Get complete power control: remote and timed individual outlet switching, auto on/off/reboot, load shed switching, outlet sequencing, and more.
• Switch power on/off for individual network devices or for groups of equipment.
• Monitor equipment power and automatically notify you of changes in current levels, circuit breaker status, temperature, unauthorized access attempts, ping response, and more.
• Notify you via e-mail, text, SNMP, SYSLOG, and audible alarms when user-defined thresholds are exceeded.