Power Equipment

This 100-240 VAC, 50-60 Hz, autosensing power adapter provides 48-VDC power to the power jack on a Gigabit PoE Media Converter (LGC5200A-LGC5202A). These converters may also be powered with 45 to 57 VDC to DC terminal block in a cascading DIN rail application.

Spare / Redundant Power Supply for devices that require 5VDC and up to 6A of power. The power supply can be used in combination with other Black Box equipment such as the CX Analog KVM Switches.

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device.

Black Box's 12-outlet vertical power strip with surge protection provides power distribution to up to twelve electrical devices while protecting against surges and suppressing EMI/RFI noise. It can be used either vertically or horizontally, mounting it in a cabinet or rack, or using it on a workbench or other like environment. It features 5-20R receptacles and a 15-ft. power cord with 5-20P plug, and is rated at 20A, 120V. It features an illuminated On/Off switch with a 20A circuit breaker to prevent dangerous overloads of connected equipment.

Manage power in one place.

These hubs provide up to eight or sixteen power outputs in one place. The power distribution units feature a single power supply with an optional secondary, to deliver full power redundancy. The Central Power Hub (CPH) supports 5VDC or 12VDC devices in a 1U chassis for convenient rack mounting. It provides power to grow your installation on demand.

The power output ports are lockable, preventing accidental disconnects. Each output is limited to 20 Watts at 12V.

Hot swappable power modules.

The chassis can supply two 460W power modules slot into the back of the Power Hub chassis. Conversion from the mains AC supply to DC voltage occurs within these modules. In situations where redundancy is required, the Power Hub will equally balance a normal load between them. In the case of one module ceasing operation, the Hub automatically transfers the full load to the remaining module, which can easily handle the needs of up to 8 respectively 16 ports.

Protection.

Power integrity, safety, and management are at the heart of the Central Power Hub system. At start-up, the CPH automatically checks the validity of the power modules. It then enables each power output in sequence so they are do not overload the modules by starting simultaneously. As the system provides steady power to your installation, protections are in place to ensure against excess demand by anyone connected device.

Remote management.

The Central Power Hub can be controlled and monitored by a web interface. Temperature, fan speeds, and current measurements are viewable. Each output can be individually controlled.

• Support for dual power supplies for redundancy, unit comes with one power supply.
• Supports eight or sixteen 5VDC or 12VDC devices in a 1U chassis for convenient rack mounting.

• Provide power and protection directly to your rackmounted equipment with our 15-amp vertically mounted power strip.
• Features 24 15-amp outlets.
• Compact size makes it an easy fit for most cabinets.
• A 15-amp circuit breaker and surge protector provide protection against voltage spikes and current overdraw.
• Features an integral 6-foot (1.8-m) cord with molded plugs.

This Black Box Data Isolator stop surges while letting high-speed traffic get through and protect equipment from being harmed by damaging ground loops caused by a difference in the ground potential of two connected devices. Compact devices that maintain Ethernet/Fast Ethernet communications across an electrical isolation barrier.