Power Equipment

GPOE 12AB 48 Volt 120 Watt

12 Port Gigabit Injector & Rack Mount

Simplify installations with a multi-port midspan injector. Power up to twelve IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This kit includes a 48 volt, 120 watt power supply to use with IEEE 802.3af PoE devices.

Save big on network upgrades and device installations. Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device.

Compatible Devices

• IP phones like Polycom, Cisco, Yealink
• WiFi Access points
• IP Cameras
• 802.3af devices
• NOTE: All devices receive the same voltage (48 volts) and share power up to 120 watts. Check your device specifications for power needs

• Power up to 12 PoE devices in one unit - extend power up to 328 feet
• Passive "Always On" power will continuously deliver power to your device
• Includes a UL Rated 48 volt, 120 watt power supply
• Compatible with Passive 802.3af PoE devices
• Mode A/B power input options allows for versatile PoE applications
• Input 48 Volts
• .65A Port Limit - up to 31 watts per port with total budget of 120 watts available for all ports
• 10/100/1000 Mbps data operation
• Quality shielded RJ45 ports
• Bright LED status indicators
• 1U Rack Mount

4 Port In-Wall Gigabit

PoE Extender with Uplink Power

Four PoE+ Ports on One Network Cable Run. Power up to four IEEE 802.3af or two 802.3at IP phones, WiFi access points, or other low voltage devices over 600 feet from the PoE source. Power this switch via the uplink port with your existing 802.3bt switch or a 55-volt, 60-watt power supply like our BT-1-55v60w-IN midspan injector.

In-Wall Pass Through PoE Switch Opens Opportunities. Rather than limiting your device options because of the cost of adding infrastructure, this high powered pass through in-wall PoE switch allows you to add devices and capacity anywhere on your network. Install in a remote office, a dorm room, a hotel room, use with a collection of cameras or wherever you need a little extra power and network capacity. Install this switch into a standard electrical receptacle for a complete integration into your home or office.

Key Features

• IEEE 802.3bt or 4PPoE compatible via uplink
• Power up to four IEEE 802.3af or two IEEE 802.3at devices
• 4 PoE + Data Out Ports
• Single Signature PoE
• 60 watt maximum PoE output
• Extends PoE an additional 300 feet
• Flush to Wall outlet for clean install and look
• Fits standard electrical outlet receptacle / Single gang box
• Bright LED indicator
• Durable construction with shielded RJ45 jacks

Mobile life powered up with GaN II fast charging power adapters from VisionTek. Change the way you charge up your devices. Powerful charging packed in an optimized compact mobile package.

• Power It Up - Fast charging up to 2 devices (2x USB-C) with power distributed dynamically across each device depending on how much power they each need. Charge a single device with full power up to 35W.
• Fast Charge - Power a mobile device 0-50% in 30min
• Compact Design - Lightweight pocket-sized wall charger, easily fits in tight corners and cramped charging environments, and stows away quickly in travel bags, drawers, purses and pockets saving valuable space.
• GaN Green - Greatly impact your household power usage both in time and consumption. Improved power efficiency using GaN II technology.
• Shielded Protection - Temperatures are monitored regularly within the charger to ensure power output is adjusted to keep your devices and environment safe. Overcurrent and overvoltage damage are a problem of the past.

GAT 24v25w

Gigabit Inline PoE Splitter/Converter with 24 Volt 25 Watt PoE or DC Output

Power One Single 24 Volt Device With Power Over Ethernet

Use the GAT-24v25w with your existing 802.3at PoE+ Switch or 48v PoE Injector to convert down to 24v Passive PoE or to Power 24v PLC's.

Key Features

• Perfect for adding a single 24v device to your 802.3at switch
• Acts as two devices in one: Use it to convert IEEE 802.3at PoE+ standard to 24 volt passive PoE OR Connect a 2.1 mm adapter and convert PoE+ power to 24 volt DC with "split" gigabit data on the RJ45 out port
• Compatible with Ubiquiti and Mikrotik
• Provides continuous 24 volts, 25 watts of power - Automatically converts
• Offers a more secure network via direct Ethernet
• Compatible with an IEEE 802.3at PoE Switch or injector (sold separately)
• Mode A/B compatible
• 2.1mm x 5.5mm DC power plug standard output

PT GPOE 1B 48 Volt 15 Watt

Single Port Gigabit Mode B PoE Injector

Instantly upgrade your network switch to PoE. Power an IP camera, desktop phone, WiFi access point, or other low voltage 802.3af device through a network data cable using this Passive Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector provides 48 volts, 15 watts of PoE power for devices labeled "802.3af."

Key Features

• Instantly upgrades your network to PoE for one device
• Use to deliver PoE power to IP security cameras, phones, wireless access points and other devices that accept passive 802.3af
• Passive "Always On" PoE power delivery for reliable throughput
• 10/100/1000 Gigabit Data Capability
• Mode B power delivery on pins 4,5+ / 7,8-
• Integrated 48 volt 15 watt power supply

GBT 24 Port

Managed PoE Injector for PoE Lighting

The high density Midspan GBT-24-M converts any switch or PoE switch into an 80 watt per port PoE (IEEE 802.3bt Type 3) Power Sourcing Equipment for PoE lighting, A/V applications, or Node Centric PoE architecture. The on board, highly visible OLED provides an intuitive Layer 1 control as well as real time monitoring by port of status and power performance of the port.

Key Features

• Provides 80 watt per port output for PoE Lighting, A/V Applications or Node Centric PoE Architecture
• Works with Digital Electricity for alternate infrastructure applications
• Layer 1 Port Management through the intuitive on board OLED screen and push button controller
• Active IEEE 802.3bt negotiation on Mode A and Mode B with power capacity up to 60 watts and a managed passive configuration up to 80 watts per port
• Designed to occupy one unit of a 19" server rack
• Renders a cost effective and easy to implement alternative to expensive, complicated infrastructure
• On-board automatic cooling fan
• Input 48-55v DC - Includes two 2.1 x 5.5 mm DC inputs

The VisionTek 20W USB-C Wall Charger is the perfect charging solution for your USB-C device. It is compatible with most quick charging specs, so you can charge your phone, tablet or other USB-C devices at the fastest possible speed. The 20W max output ensures your device will be ready to go in the shortest time possible. Most USB-A chargers support a max of 4.5W. With the correct cables, you can charge your device up to 4x faster!

Key Features

• 20W output for a variety of PD devices from smart phones to tablets.
• Compatible with USB-C to USB-C cables, USB-C to USB-A cables, and USB-C to lighting cables. Cables must support desired delivery wattage for the device to charge at maximum speed. Cable is not included.
• Compatible with most devices including iPad Pro, iPhone 12, iPhone 12 Max, iPhone 12 mini, iPhone XR, Samsung Galaxy, Google Pixel and most other devices with a USB-C port.
• Compact size and lightweight allows for convenient storage in your bag or purse. Foldable plug prevents any damage.
• Charger supports the following outputs: USB-C QC Spec - 3.5 to 6.5V-3A, 6.5 to 9V-2A, 12V-1.5A, 5V-2.4A. Check your device manufacturer specs for recommended charging voltage and amperage.
• Safety Assured - This product is equipped with smart ICs to prevent overcharging and has been certified by the FCC, UL and CE.

Mobile life powered up with GaN II fast charging power adapters from VisionTek. Change the way you charge up your devices. Powerful charging packed in an optimized compact mobile package.

• Power It Up - Fast charging up to 4 devices (2x USB-C, 2x USB-A) with power distributed dynamically across each device depending on how much power they each need. Charge a single device with full power up to 100W.
• Fast Charge - Power a mobile device 0-50% in 30min
• Laptop Charging - Charge a Dell XPS 13, Macbook Air, MacBook Pro, LG Gram, HP Envy, Chromebook and more.
• Compact Design - Lightweight pocket-sized wall charger, easily fits in tight corners and cramped charging environments, and stows away quickly in travel bags, drawers, purses and pockets saving valuable space.
• GaN Green - Greatly impact your household power usage both in time and consumption. Improved power efficiency using GaN II technology.
• Shielded Protection - Temperatures are monitored regularly within the charger to ensure power output is adjusted to keep your devices and environment safe. Overcurrent and overvoltage damage are a problem of the past.

GAF USB2

In Wall PoE Splitter

Perfect for integrating USB charging into your home or office. Easily convert a regular outlet into a USB charging and network data outlet. Utilize Power over Ethernet technology to extend power to this 5 volt wall outlet near your office desk, in your kitchen or living areas, or anywhere you need a convenient charging station. Save money by using the GAF-USB2 in-wall outlet; it can easily be integrated into your space for a fraction of the cost of installing a traditional 120 VAC outlet.

Key Features

• Simple, cost effective solution for installing a USB charging station where you need it
• In-Wall option provides a clean look and integrates into your home or office space
• Power the outlet via PoE from up to 328 feet away
• Output 5 volts, 10 watts on the USB port - Apple and Android outlets configured for fast charging
• 10/100/1000 Gigabit Data on the RJ45 outlet
• Compatible with a Mode A (pins -1,2 +3,6) IEEE 802.3af injector or switch (try GPOE-1A-48v15w-ONE or GPOE-4A-48v48w)