Power Equipment

60 Watts of Power for the Internet of things (IoT)!

The Intellinet Network Solutions Gigabit High-Power PoE Injector provides up to 60 W using all four pairs of twisted-pair Cat5 or Cat6 cabling to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Point-of-sale card readers & printers need up to 60 watts. Lighting fixtures and controllers require 40 to 50 watts. Thin clients draw up to 50 watts. Ultra PoE standard is an excellent solution for bringing power to these important, critical systems. As many new powered devices enter the market, you'll be ready for them with an Intellinet Network Solutions Gigabit High-Power PoE Injector.

Full Compatibility with Existing IEEE 802.3af/at PoE Powered Devices

The Intellinet Network Solutions Gigabit High-Power PoE Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch.

Reduced Wiring Costs

It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Protect Your Equipment

Once DC power is connected to your networked equipment through the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads and high voltages.

Wall-mount option

For full installation flexibility, you can mount the injector on the wall through four built-in fixing points on the back panel.

Learn More

This PoE++ Extender doubles the range of two Gigabit Power over Ethernet connections - even in harsh outdoor conditions

The Intellinet Network Solutions 2-Port Outdoor Vandalproof Gigabit PoE++ Extender adds up to 100 m (328 ft.) to the connection distance from a PoE source to one or two output devices via Cat5e or Cat6 cable. This PoE++ (4PPoE) extender does not need an additional power supply since it draws its power from the PoE input.

Designed for Outdoor Use

This PoE++ extender is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating, vast operating temperature range of -20 - 60°C (-4 - 140°F) and vandal-proof IK10 score make the Intellinet Network Solutions 2-Port Outdoor Vandalproof Gigabit Ultra PoE Extender able to withstand harsh conditions.

Reduced Wiring Costs

This Ultra PoE Extender helps avoid the expense of running AC power lines for a wireless access point, network camera, IP phone, or other compatible device. Simply connect the PoE Extender to the LAN switch port through existing Cat5e/6/6a cables to deliver DC power as well as transfer data.

Power over Ethernet 802.3bt Compliant

This Ultra PoE Extender supports the IEEE 802.3bt protocol over four pairs (4PPoE), which allows for a power input of 95 W. It forwards data at Gigabit speeds and offers up to 30 watts per port to a connected IEEE 802.3at- or IEEE 802.3af-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance between PoE source and device to 200 m (656 ft.).

Simple Installation

? This PoE Extender was designed to be as easy as possible to set up and use. All it takes to have it up and running is to connect its PoE In port to your PoE injector or PoE switch and to connect the PoE Out ports to the PoE devices you want to connect (e.g., a VoIP phone and a PoE network camera).

Learn More

Simple, Fast Phone Charging with the Manhattan Wireless Charging Pad



Charging your phone is even simpler with the Manhattan Wireless Charging Pad - 10 W. Whether your phone has wireless charging built-in or your phone case supports wireless charging, a quality wireless charger from Manhattan makes it easy to get power back into your phone fast. With a dedicated charging pad, there's no need to find the right cable or worry about slower charging from a low-amp wall charger every time your phone needs power. Once you set it on the charger, your phone gets the fastest charge it can handle - from 10 W, 7.5 W or 5 W. Plus, as long as it isn't made of metal and is less than 5 mm (0.2 in.) thick, your phone case won't interfere with charging, so it stays protected even while it's on the pad. The Manhattan Wireless Charging Pad - 10 W truly offers a no-hassle way to charge up your phone fast.

Learn More

240W Type-C Power Delivery 3.1 GaN USB FastCharger - Smaller, Safer, and Ultra-Powerful

Experience ultra-powerful, simultaneous charging for up to four devices, with a maximum power output of 240W. The advanced GaN (gallium nitride) chip in this charger is more efficient than traditional silicon chips. Its components are smaller, lighter and emit less heat for a more compact, cooler and safer charger

Perfect for All Your Devices

Perfect for the most power-hungry USB PD devices, including laptops, MacBook® Pro, Ultrabook™, phones, tablets, and portable game consoles, the USB Power Delivery (PD) 3.1 ensures seamless charging, delivering up to 140W on one port, which charges a MacBook Pro 16" (M2 Pro) to 50% in just 28 minutes. Charge simultaneously on a second port with up to 100 W, making dual laptop charging a breeze.

Smart IC Technology

Our Smart IC technology guarantees ideal power allocation, while built-in overload, overcurrent, and overheating protection ensure the safety of your devices.

Travel-Friendly Design

No separate travel adapter needed; the detachable power cable can be exchanged for different regional versions like C5 to US, EU, UK, and more. Plus, with a detachable 1 m (3 ft.) power cord featuring a C6 to AC wall plug, you can charge your devices conveniently and safely. Equipped with rubber feet, this charging station stays securely in place on your desktop. If you want to place it in an upright position, you can place it on the included detachable base for a firm upright stand on flat surfaces, which prevents it from tipping over. The upright position is especially useful with multiple devices plugged into the ports.

Learn More

Convenient Qi^®-compatible wireless charger for iPhone^®, Android™ phones and more

Juice up your phone, earbuds or smartwatch simply by placing them in the center of the Manhattan Fast Wireless Charging Pad - 15 W. You never need to fuss around with plugging and unplugging cables again - just set your device down and power up. A very subtle and therefore sleep-friendly blue LED light lets you know where you are in the charging process, which is great if you use this charger on your nightstand.

Maximum compatibility with all Qi-enabled devices

This Manhattan wireless charger allows Qi-compatible fast-charging with all phones that support it. With power up to 15 W / 10 W / 7.5 W for phones from Google™, Samsung^®, LG, Apple^® and more, you'll be ready to go in no time. You can also charge other devices such as AirPods^®, cases and smartwatches.

Superior safety and through-case charging

This Manhattan power solution charges through phone cases up to 6 mm (0.24 in.) thick. If you place a metallic item like a key on the charging area, the Foreign Object Detection (FOD) mechanism will automatically shut off the charger. The nonslip rubber helps to grip your phone, keeping it safely in place while charging. Plus, overload, overcurrent and overheating protection guarantee maximum safety.

 

Learn More

Deliver Power over Ethernet to remote devices

The Intellinet Network Solutions PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available.

Simplify Installation for an Ethernet-based Device

Having to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software.

802.3af Compliant Power over Ethernet

The PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches.

Adjustable Power Output

During the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side.

** Maximum distance per 802.3u specifications.

Learn More

nject 95 Watts of Power Into Your Internet of Things (IoT) or PoE Network!IEEE 802.3bt Compatible

The Intellinet Network Solutions Gigabit Ultra PoE Injector provides up to 95 W using all four pairs of twisted-pair network cabling to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Point-of-sale card readers & printers need up to 60 watts. Lighting fixtures and controllers require 40 to 50 watts. Some motorized IP cameras need more than 70 watts. The IEEE 802.3bt Ultra PoE standard is an excellent solution for bringing power to these critical systems. As many new IEEE 802.3bt powered devices enter the market, you'll be ready for them with an Intellinet Network Solutions Gigabit Ultra PoE Injector.

Full Compatibility with Existing IEEE 802.3af/at PoE Powered Devices

The Intellinet Network Solutions Gigabit Ultra PoE Injector helps you connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch.

Reduced Wiring Costs

It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing network cabling to deliver DC power as well as transfer data.

Protected Equipment

Once DC power is connected to your networked equipment through the network cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads and high voltages.

Learn More

Outdoor Gigabit PoE++ Injector - 60 W for an IEEE 802.3bt Powered Device

The Intellinet Network Solutions Outdoor Vandalproof Gigabit PoE++ Injector lets you connect your IEEE 802.3bt/af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This 4PPoE injector has an output power rating up to 60 watts, which is enough for even very power-hungry PoE++ devices like motorized PTZ cameras, thin clients, point-of-sale systems, lighting controllers and digital signage applications.

Hardened design for outdoor and industrial use

This PoE++ injector is the right power and data connector for its suitability to a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating, vast operating temperature range of -40 – 75°C (-4 – 140°F) and vandal-proof IK10 score make this Power over Ethernet injector able to withstand harsh conditions and industrial environments. Beyond that, it has rating for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6).

Reduced wiring costs

There's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the injector through its two-pin terminal block, simply connect this Ultra PoE Injector to the LAN switch port, and use the existing Cat5/6/6a cabling to deliver power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.).

Safe protection for your expensive network equipment

The auto-sensing technology of this high-power PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.

Wall-mount option

For full installation flexibility indoors or outdoors, you can mount the injector on the wall through its four built-in holes. The required mounting kit comes included in the package.

Learn More

Your phone is dirtier than you think - clean it with our Phone Sanitizer

Your smartphone can hold 10 times more germs than surfaces you think of as unclean. On any given day you end up touching countless objects that are potentially ridden with bacteria and viruses. Door handles? Yep. Grocery carts? Check. Toilet seats? Oh yes. And whatever you touch with your hands can end up on your phone. That phone you press against your ear. That phone your toddler likes to put in their mouth. That one electronic device, which many of us use the most each day, can harbor an average of approximately 20,000 distinct types of bacteria. Knowing this, how often do you really properly clean your smartphone? And if you do clean it, are you sure you're getting the bacteria and viruses that can hide in its tiny cracks and crevices?

Sanitize your phone and much more with UVC ultraviolet germicidal irradiation (UVGI)

The Manhattan Phone Sanitizer with Qi Wireless Charger quickly kills off a plethora of germs, bacteria and viruses without chemicals. Simply place your smartphone in the box and close the lid. Six powerful lights hit the exposed surfaces with germicidal UV waves to eradicate up to 99.9% of germs in just five minutes. An acoustic signal and a status LED let you know when the cleaning cycle is complete for that side. It doesn't just clean your phone either. This sanitizing box works on credit cards, jewelry, earbuds, key chains, and more. If it fits in the device bay, you can safely sanitize it with the Manhattan Phone Sanitizer.

Qi-Certified Wireless Charging - Simple and Fast Phone Charging

Your compatible devices get even more with our Phone Sanitizer's built-in wireless charging pad. If your phone, phone case, earbuds or smartwatch supports the function, the included wireless charger makes it easy to get power back into your device fast. With a dedicated charging pad, there's no need to find the right cable or worry about slower charging from a low-amp wall charger every time you need power. Once you set your device on top of the Phone Sanitizer case, it starts getting the fastest charge it can handle - from 10 W, 7.5 W or 5 W. The LED "breathes" to let you know it's charging.

• Integrated UV LEDs to eliminate germs, viruses and bacteria
• Built-in Qi-certified 10-, 7.5- or 5-W wireless charger
• Quick 5-minute cleaning cycle
• Supports highly efficient charging with Quick Charge™ (QC) technology
• Acoustic signal that informs you when your device is clean
• Works with any Apple® iOS or Android™ powered smartphone
• Power supply and USB-C charging cable included
• Status LEDs when sanitizing and charging
• Three-year warranty

Learn More