Power Equipment

GAT USBC

PoE+ to USB Type C

This PoE to USB Type C Power Delivery solution is ideal for delivering a continuous charge to your WiFi enabled device. This PoE splitter negotiates USB-C Profiles to keep your tablet, camera or other device charged and powered on. The separate network output can provide direct secure network at Gigabit data rates.

We designed the GAT-USBC-REV2 specifically to be compatible with the Apple iPad Pro 12.9" profile for fast charging at 15 volts. However, it works to negotiate up to 25 watts* of USB Type C power to other USB-C devices like Nestcam Outdoor, Google WiFi Mesh Router and more.

Key Features

• Compatible with USB Type C devices like iPad Pro 12.9" , Nest Exterior Cameras, Google WiFi Mesh Router and other USB-C Devices
• Ideal for extending continuous power to USB-C Devices requiring up to 25 watts
• Output with Power Delivery negotiation at 5V, 9V, 12V, 15V, 20V
• Max Output - 25.5 Watts
• Works with IEEE 802.3at (POE+) switch or injector (sold separately)

Learn More

GPOE 4A 48 Volt 48 Watt

Gigabit Mode A PoE Injector

Simplify installations with a multi-port midspan injector. Power up to four IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector comes with a 48v UL approved power supply to provide direct voltage to your IEEE 802.3af/at device.

Compatible with IEEE 802.3af with Mode A Negotiation. This midspan meets the IEEE standard negotiation using pins 1,2 / 3,6 to deliver PoE power to your device.

Key Features

• Power up to 4 PoE devices in one unit - extend power up to 328 feet
• Passive "Always On" power will continuously deliver power to your device
• Compatible with Passive 802.3af/at PoE devices
• Mode A negotiation on pins 1,2- / 3,6+
• .65A Port Limit
• 10/100/1000 Mbps data operation
• 2.1mm standard DC inputs
• Includes a UL/CE/FCC Rated Power Supply - Total budget 48 watts
• Quality shielded RJ45 ports
• Bright LED status indicators

Learn More

GBT 24 Port Managed PoE Injector for PoE Lighting with 3000W Power Supply

The high density Midspan GBT-24-M converts any switch or PoE switch into an 80 watt per port PoE (IEEE 802.3bt Type 3) Power Sourcing Equipment for PoE lighting, A/V applications, or Node Centric PoE architecture. The on board, highly visible OLED provides an intuitive Layer 1 control as well as real time monitoring by port of status and power performance of the port.

This unit comes with Power Harness for 55 Volt, 3000 Watt Budget.

Key Features

• Provides 80 watt per port output for PoE Lighting, A/V Applications or Node Centric PoE Architecture
• Works with Digital Electricity for alternate infrastructure applications
• Layer 1 Port Management through the intuitive on board OLED screen and push button controller
• Active IEEE 802.3bt negotiation on Mode A and Mode B with power capacity up to 60 watts and a managed passive configuration up to 80 watts per port
• Designed to occupy one unit of a 19" server rack
• Renders a cost effective and easy to implement alternative to expensive, complicated infrastructure
• On-board automatic cooling fan
• Input 48-55v DC - Includes two 2.1 x 5.5 mm DC inputs
• Comes with 3000W Power Supply

Learn More

VisionTek 100W Power Supply - 100 W Learn More

GAF 12v12w

Gigabit, Model A/B Inline Splitter

The GAF-12v12w splitter works with 802.3af PoE to provide 10 watts of continuous 12 volt power. Use with your existing PoE Switch or 48v PoE Injector to power 12 volt non-PoE devices such as Foscam 12 volt outdoor cameras or other devices up to 328 feet from the source.

Key Features

• Converts 44-56 volts PoE to 12 volt 12 watt output on a 2.1 mm DC barrel
• Input voltage range 44v to 56v PoE
• 2.1mm x 5.5mm DC power plug standard
• Output voltage 12 Volts 1 Amp for one camera or other device
• Data rate is 10/100/1000
• Works with your existing 802.3af PoE switch or injector (sold separately)

Learn More

GPOE 1A 48 Volt 15 Watt

Single Port Gigabit Mode A PoE Injector

This compact single port PoE Injector for 802.3af (48 volt) devices fits into the space of a single electrical outlet to provide power for an IP Camera, VOIP Phone, or WiFi Access Point.

Key Features

• Instantly adds power to an Ethernet cable to power one PoE device
• Powers 802.3af devices ( no auto negotiation )
• Passive "always on" power delivers continuous 48 volts
• Power supply included is 48 volts DC, .3 amp, 15 watts
• Mode A operation - power and data on pins 1,2- and 3,6+
• UL,CE, DoE and FCC listings

Learn More

AT 24 Port 56 Volt 240 Watt

Active PoE Injector for High Powered Devices

Power High Powered Devices like Cisco WiFi APs, PTZ Cameras and more. This 802.3af/at compliant Power over Ethernet (PoE) injector takes power from the DC power source and adds it to a Cat5, Cat5e, or Cat6 Ethernet data cable to power your PoE devices.

Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices. Power is only added to the data cable when an 802.3af or 802.3at device is connected.

Key Features

• Instantly upgrade your network switch to IEEE 802.3at PoE+
• 24 PoE + Data Ports
• Active negotiation protects non-PoE Devices
• 10/100/1000 Gigabit Data capability
• 30 Watt output per port with Max 240 watts shared total
• Includes two UL approved 56v 120w power supplies
• 2.1 DC power connector
• 1U Rackmountable injector

Learn More

VisionTek USB Type C Wall Charger provides up to 61W Power Delivery for Fast Charging your devices.

• USB-C PD up to 87W
• USB 3.0 PD up to 18W
• 1x USB Type C port
• 3x USB 3.0 ports
• 1 Year Warranty

With the USB-C 90W Charger, you can fast charge your Type-C and USB 3.0 devices. Compatible devices include most current USB-C and USB 3.0 devices. Some of the compatible devices are:

• iDevices
• Android Devices
• Tablets
• Laptops

Learn More

Mobile life powered up with GaN II fast charging power adapters from VisionTek. Change the way you charge up your devices. Powerful charging packed in an optimized compact mobile package.

• Power It Up - Fast charging up to 2 devices (2x USB-C) with power distributed dynamically across each device depending on how much power they each need. Charge a single device with full power up to 65W.
• Fast Charge - Power a mobile device 0-50% in 30min
• Laptop Charging - Charge a Dell XPS 13, Macbook Air, LG Gram, HP Envy, Chromebook and more.
• Compact Design - Lightweight pocket-sized wall charger, easily fits in tight corners and cramped charging environments, and stows away quickly in travel bags, drawers, purses and pockets saving valuable space.
• GaN Green - Greatly impact your household power usage both in time and consumption. Improved power efficiency using GaN II technology.
• Shielded Protection - Temperatures are monitored regularly within the charger to ensure power output is adjusted to keep your devices and environment safe. Overcurrent and overvoltage damage are a problem of the past.

Learn More