Video Switchboxes

One product, many uses

With its innovative crossover design, the AV Bridge MatrixMIX Multipurpose AV Switcher can be used in a host of applications including live production, automated presentation, and unified conferencing and collaboration. The AV Bridge MatrixMIX offers a multifunctional feature set to combine switching, advanced camera control, streaming and graphics mixing capabilities - all from a single appliance.

This built-in versatility lets you enhance presentations or live events with graphics and interactive content for a superior user experience - and you can live stream it to a UCC application as well.

When paired with the PCC MatrixMIX Camera Controller and TeleTouch 27 USB Touch-Screen Multiviewer, plus Vaddio cameras, audio devices or trigger sensors, you can create customized solutions for a number of specific applications:

Use as a production switcher in a live event application (live streaming switcher)
Configure as a local presentation switcher for a lecture capture application in a larger lecture hall
Configure for a PC-based collaboration session
Because the AV Bridge MatrixMIX can be controlled remotely, an operator can use it in large enterprise and higher education applications where a centralized control center is used to control multiple AV rooms

Simple to operate

Because it is easy to use, an IT staffer or volunteers at a house of worship can create a first-rate production without extensive training. With the AV Bridge MatrixMIX and the TeleTouch MultiViewer, the user simply touches the screen for live video production to choose which camera scene to use and it goes live.

The AV Bridge MatrixMIX AV Switcher is an 8x2 video mixer that also provides multiviewer output. Its 11x7 audio mixer supports analog, HDMI, USB and IP audio channels. It offers embedded RTSP IP and USB 3.0 output streaming, plus two graphic keying layers per output channel.

The TruLink DVI-D splitter connects two HDTV displays or two computer monitors equipped with DVI inputs. HDCP compatibility means this splitter will work with high definition video for HDTV applications and high resolution PC applications. Compatible with DVI-D equipped PC video cards operating at a maximum resolution of 1920 x 1080 pixels, or with video devices at 480p, 480i, 720p, 1080i, and 1080p scan rates. Built-in DVI repeater allows lossless runs up to 10 meters from the splitter.

The Port Authority2 Audio Video Splitter/Extender by Cables To Go is ideal for distributing audio and video to classrooms, exhibits, trade shows, demonstrations, and multimedia presentations. This splitter will broadcast your computer's audio and video output to multiple destinations. Daisy-chain more than one splitter to expand the number of monitors and speakers you can reach. With the built-in video signal enhancement, you can place monitors up to 210 feet away while maintaining your video quality. From use in test bench facilities, data centers and help desks to video broadcasting, the Port Authority2 Audio Video Splitter/Extender delivers both performance and value.

Distribute any video signal to 2 different video outputs, while maintaining vivid picture quality. Though powerful, this splitter is easy to use; just connect the cables, and you're ready to go! There is no software required, or complicated interface cards to install. This monitor splitter not only distributes, but also boosts your high resolution video signal up to 210 feet.

Includes power-saving mode, color-coded connectors for the input and outputs, durable all-metal housing, power and activity LED indicators. Also suitable for XGA, SVGA, VGA, and MultiSync resolution monitors. Daisy-chain multiple units together for even more outputs.

Please Note: The term "extender" refers to the product's ability to extend the distance of your cable runs to 210 feet. It does not mean the product provides "extended desktop" functionality, or the ability to view different information on each of your monitors.

The HDMI and VGA + Stereo Audio HDBaseT over Cat6 Extender Wall Plate Transmitter is an ideal solution for extending audio/video signals from a Blu-ray- player and a laptop to a projector. This transmitter extends HDMI, VGA and Stereo Audio signals over a single Cat5e, Cat6 or Cat6a unshielded twisted pair network patch cable up to 115 feet at a 4K (4096 x 2160 at 30Hz, 4:4:4) for HDMI and 230 feet at a 1080p resolution for VGA. The rear cable connections for the Cat6 cable and the optional serial cable are set at 90 degrees, making connections in a wall box easy. The local HDMI output of the front of the wall plate allows an additional HDMI display to be supported via an HDMI cable. Switching between HDMI and VGA inputs is made easy with three options available. Automatic switching displays the last connected device, manual switching via the button on the front of the wall plate, or Serial RS232 switching which accepts serial commands from a control device, like the C2G TruLink A/V Controller. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice power, which allows power to be supplied over the Cat5 cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display's capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. This transmitter is compatible with any of the HDMI HDBaseT receivers offered by C2G and works with C2G DB9 to RJ25 Serial RS232 Cables.

Note: Stranded Cat5e/6/6a patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat5e/6/6a network cabling is recommended for applications where the Cat5e/6/6a cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments.

For best performance use a -Cat6 Solid Shielded Patch Cable.

This switch box features a heavy-duty, easy-to-turn rotary switch enclosed in a metal case with rubber feet to protect your desk or tabletop. The rugged metal case withstands the rigors of everyday use, and helps prevent unwanted EMI/RFI interference. Each connector is wired straight-through in a pin-to-pin configuration to ensure compatibility.

Perfect for situations where two HDMI devices must share a single HDMI input on a display, this HDMI auto switch provides for hassle free operation. The power required for operation of this switch is provided from the HDMI source devices, so no separate power adapter is required. With the wealth of devices now using HDMI, it is easy to run out of free HDMI inputs on a HDTV or home theater receiver. This HDMI selector switch solves the problem by providing additional high-definition digital inputs for sources including Blu-ray™ and DVD players, gaming systems, and high-definition cable/satellite boxes.

The auto switching functionality provides for a system that is easy to use, while manual switching functionality is available for situations where more control is desired. The auto switching feature is able to sense when a new device is connected or powered on and will automatically switch to that port. When the device is disconnected or powered off, then this feature automatically switches to the first connected device. In situations where two devices are connected to the switch and powered on, or sending an HDMI signal to the switch, the Select button on the top of the switch may be used to switch back and forth between the two inputs.

Perfect for situations where two HDMI devices must share a single HDMI input on a display, this HDMI auto switch provides for hassle free operation. Most high-definition audio/video components utilize the HDMI interface to provide crystal clear, digital sound and picture. With the wealth of devices now using HDMI, it's easy to run out of free HDMI inputs on your TV set or receiver. This HDMI selector switch solves the problem by providing additional high-definition digital inputs for sources including DVD player, Blu-ray™, Disc and HD-DVD players, gaming systems, and high-definition cable/satellite boxes. The auto switching functionality provides for a system that is easy to use, while manual switching functionality is available for situations where more control is desired.

The ultimate controller for high definition and progressive scan video sources, this selector routes any of three source devices to each TV/monitor or one source to five TV/monitors. Connect all your HDTV products including DVD players, satellite receivers, cable set-top boxes, or gaming systems, and use the remote control or front panel buttons to watch any picture on any five plasma, CRT, LCD or projection televisions with complete independence!

This matrix switch offers three component video inputs, three stereo audio inputs, and three optical digital audio TOSLINK inputs. It will switch all these inputs to any of five outputs, with the audio following video. The matrix switch also comes with an infrared remote control that features discrete commands to make programming complex macros into your universal remote control system a snap. Compatible with all interlaced or progressive scan analog component video signals. Now you can take control of your system and watch what you want where you want, and do it with no compromises!

The 4-Port HDMI Switch - 4K 60Hz is a 4-input 1-output switch supporting up to 4K (3840 x 2160 at 60hz, 4:4:4) video, ideal for applications utilizing the HDMI 2.0 standard. A perfect solution for connecting and switching between computers, Blu-ray players, gaming consoles, digital cable or satellite boxes, and A/V receivers.

This product offers control and flexibility via a manual push button located conveniently on the front of the switch or by remote control over IR, allowing for quick changes between video sources.

The HDMI switch is HDCP 2.2 compliant and supports exceptional 4K Ultra HD resolutions up to 4096 x 2160 at 60hz, handling total HDMI data rates up to 18Gbps.