Transceivers/Media Converters
-
Altronix IP and PoE+ over Coax or Extended Ethernet Cable Receiver - Network (RJ-45) - 2x PoE+ (RJ-45) Ports - Fast Ethernet - 10/100Base-TX - 1640.42 ft - PoE+
eBridge100RM is a versatile dual solution Ethernet receiver/media converter which transmits data at 100Mbps full duplex and power over Coax cable or extended CAT5e cable in a PoE+ compliant format. The eBridge100RM is powered via a PoE midspan such as the Altronix NetWay series or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge100TM/eBridge100ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over existing coax or structured cable.
Applications:
- Retrofit digital IP cameras in an analog CCTV installation.
- Works with Megapixel, HD720, HD1080 ,and VGA (SD) cameras.
- Extend Network link distance in an industrial environment over 610m.
- Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.
$144.21 -
Altronix eBridge100SPR Ethernet over Coax Receiver - 1 x Network (RJ-45) - Fast Ethernet - 100Base-TX - 984.25 ft - AC Adapter
The eBridge100SPR passes data and sends power over the coax to the eBridge200WPM 2-port Outdoor Transceiver. Data transmission and power over the Coax is possible up to 300m. Maximum range from head end to the PoE camera/device is 500m taking into consideration that up to 100m of structured cable may be deployed at each end. Built in IP management allows for remote camera reset, monitoring and reporting via various IP protocols.
Learn More
This model replaces eBridge1SPR$144.21 -
Altronix EoC and PoE/PoE+ Transceiver - Network (RJ-45) - 1x PoE+ (RJ-45) Ports - Fast Ethernet - 10/100Base-TX - 1640.42 ft - PoE+
eBridge100ST EoC transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options (see compatibility list below/Altronix.com) and is powered by an external midspan, such as the Altronix Netway series. The receiver passes PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices. They can be installed at distances greater than 300m. They provide a simple way to replace legacy analog products with new IP devices over existing coax. eBridge100ST is compatible with the following Altronix receivers: eBridge100RM, eBridge400PCRM, eBridge800PCRM or eBridge1600PCRM.
Learn More$144.21 -
Altronix IP and PoE/PoE+ over Coax Hardened Transceiver - 1 x Network (RJ-45) - 1x PoE (RJ-45) Ports - Fast Ethernet - 10/100Base-T - 1640.42 ft - PoE+
Altronix eBridge100TM EoC hardened transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE/PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE/PoE+ power over the same coax cable to the eBridge100TM transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 300m. When paired with the eBridge100RM EoC Receiver, the eBridge100TM will pass 100Mbps full duplex data and PoE/PoE+ over CAT5e (or higher) up to 500m.
Learn More$144.21 -
Altronix eBridge1CR - IP over Coax Receiver - 1 x Network (RJ-45) - 10/100Base-TX - 1500 ft - Desktop
The eBridge1CR is a CAT5 to Coax cable Ethernet adapter. The receiver enables fast 10/100Base-T Ethernet digital communication to be received over Coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission over the Coax can be extended to 1500' (five times the 100m/328ft Ethernet maximum length), eliminating the need for repeaters. At the same time the unit can combine Composite Video Signal with the Ethernet data enabling connection to an analog input on a monitor or matrix switch. The eBridge1CR must be used with and eBridge1CT or a compatible Hybrid camera/device with the "sloc" technology.
Learn More$110.91 -
Altronix eBridge1CRT Transceiver/Media Converter - 1 x Network (RJ-45) - Fast Ethernet - 10/100Base-T - 1640.42 ft - AC/DC
The eBridge1CRT - IP over Coax transceiver and receiver kit is designed to enable fast 10/100Base-T Ethernet digital communication over coax cable. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission is extended up to 610m (over five times the 100m Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit Composite Video Signal with Ethernet data simultaneously.
Learn More$205.23
