Modules
-
Black Box Matrix Switch Modular Interface Card - TAA Compliant
Regular Price: $1,737.88
Special Price $1,488.36
The DKM HD Video and Peripheral Matrix Switching System is comprised of modular housing chassis with 2, 4, 6, or 21 slots and transmitter and receiver interface cards. The DKM extender setup provides the widest range of possible combinations, which makes it easy to customize for your specific application.
These new DKM components are part of a modular system. You will need to contact Black Box to have them assembled to fit your application. To configure your DKM HD Video and Peripheral Matrix Switch setup, call our FREE Tech Support.
Learn More -
Black Box LFP412 SFP (mini-GBIC) Module - For Optical Network, Data Networking - 1 x Duplex LC 1000Base-X Network - Optical Fiber - 0.1 mil Wavelength - Multi-mode - Gigabit Ethernet - 1000Base-X - 1.25 Gbit/s - 2 km Maximum Distance - Hot-pluggable - TAA
Regular Price: $104.32
Special Price $89.34
Modular flexible optical transceivers for data communications equipment.
This SFP is designed to support throughput speeds of up to 1250 Mbps, making it ideal for high-speed applications. It provides essential link information, including SFP type, fiber link length, wavelength, and bit rate. The extended diagnostics enable this SFP also to report temperature, TX and RX power, voltage, and bias current. The hot-pluggable interface allows for easy swapping of SFPs without downtime, ensuring flexibility as your network requirements evolve. It is compatible with SFP slots on most network devices, making it a versatile option for a wide range of systems.
Learn More -
Black Box Matrix Switch Modular Interface Card - TAA Compliant
Regular Price: $1,110.84
Special Price $951.35
Black Box Matrix Switch Modular Interface Card - TAA Compliant Learn More -
Black Box LFP420 SFP (mini-GBIC) Module - For Data Networking, Optical Network - 1 x Simplex LC 1000Base-X Network - Optical Fiber - 0.1 mil, 0.1 mil Wavelength - Single-mode - Gigabit Ethernet - 1000Base-X - 1.25 Gbit/s - 10 km Maximum Distance - Hot-plu
Regular Price: $122.93
Special Price $105.28
Modular flexible optical transceivers for data communications equipment.
This SFP supports throughput of up to 1250 Mbps, making it well-suited for high-speed applications such as 1000-Mbps Ethernet. It provides essential link information, including SFP type, fiber link length, wavelength, and bit rate. Its extended diagnostics feature reports key data such as temperature, transmit (TX) and receive (RX) power, voltage, and bias current. The hot-pluggable interface allows for easy SFP replacement without downtime, making it ideal for changing network requirements. Compatible with SFP slots on most network devices.
Learn More -
Black Box ACX1MT-ARP Expansion Module - 1 x DB-9 RS-232 Serial, 2 x PS/2Multi-mode, Single-mode - Plug-in Card - 1 Pack - TAA Compliant
Regular Price: $352.07
Special Price $301.53
The DKM FX Modular Extender System is comprised of modular housing chassis with 2, 4, 6, or 21 slots and transmitter and receiver interface cards. The DKM FX extender setup provides the widest range of possible combinations, which makes it easy to customize for your specific application.
These new DKM FX components are part of a modular system. You will need to contact Black Box to have them assembled to fit your application. For consultation on your DKM FX setup, call our FREE Tech Support.
Learn More -
Black Box LSP421 SFP+ Module - For Data Networking, Optical Network - 1 x LC 10GBase-X Network - Optical Fiber - 0 mil Wavelength - Multi-mode - 10 Gigabit Ethernet - 10GBase-X - 10 Gbit/s - 0.30 km Maximum Distance - Hot-swappable
Regular Price: $270.84
Special Price $231.95
Modular flexible optical transceivers for data communications equipment.
- Compact, interchangeable, and hot-swappable.
- Metal enclosure helps shield communications from EMI interference.
- When used within a managed platform, supports digital diagnostic capabilities and loopbacks for easier maintenance.
- Supports the standard wavelength spectrum as defined by ITU G.694.2.
- MSA SFF-8472 and INF-8077i compliant, supporting interoperability with other network devices.
-
Black Box Expansion Module - For Switching Network - 1 x USB 2.0 - TAA Compliant
Regular Price: $315.84
Special Price $260.36
Part of the DKM HD Video and Peripheral Matrix Switching System is comprised of modular housing chassis with 2, 4, 6, or 21 slots, and transmitter and receiver interface cards. The DKM extender setup provides the widest range of possible combinations, which makes it easy to customize for your specific application.
Learn More
These new DKM components are part of a modular system. You will need to contact Black Box to have them assembled to fit your application. To configure your DKM HD Video and Peripheral Matrix setup, call our FREE Tech Support. -
Black Box Pro Switching Gang Switch Controller Card - 2U, RS232 - For Data Networking - 1 x RJ-45 Network LAN, 2 x RJ-11 - Twisted PairEthernet - TAA Compliant
Regular Price: $632.50
Special Price $366.99
- If you plan to daisy-chain multiple chassis, the Controller Card in the first chassis controls the entire system.
The advanced design of the Pro Switching System, 2U (SM260A) gives incredible operational flexibility and performance. Switch one card individually or switch the entire chassis through a Controller Card. You'll need one Controller Card per rack chassis. If you plan to daisy-chain multiple chassis, the Controller Card in the first chassis controls the entire system.
This card enables you to switch the chassis from anywhere via an RS-232 or IP connection.
We also offer an RS-232 Only Controller Card (SM263A), which enables you to gang switch via the manual toggle switch or with serial commands.
Or if you want to extend RS-232/IP control to a second daisy-chained Pro Switching System chassis, order the SNMP Expansion Controller Card (SM264A). This enables you to send hardware control signals and control the daisy-chained system with RS-232 messages through the RS-232/Ethernet (SNMP) Controller Card (SM262A).Ordering Instructions | First, order the chassis...
Pro Switching System, 2U, 18-Card (SM260A)
Next order at least one power supply | Power Supply Cards:
Redundant Power Supply Cards (NOTE: cards requires two chassis slots.):
100 - 240-VAC Input (SM261A-VAC)
-48-VDC Input (SM261A-VDC)
Or order:
AC External Adapter Card (SM261A-CARD) ( NOTE: card requires one chassis slot.)
And at least one power supply (order two for redundant power)...
Power Supply, 120 - 240 VAC, External (SM961A-PS)
...then select a Controller Card...
RS-232/Ethernet (SNMP) (SM262A)
RS-232 Only (SM263A)
SNMP Expansion (SM264A)
...next choose your A/B Switch Cards...
DB25/RS-232 (SM265A)
DB25/RS-530 (SM266A)
Video F-Connector, Latching (SM276A-LCH)
Video F-Connector, Non-Latching (SM267A)
Multimode Fiber Optic:
ST®, Latching (SM277A-MM-ST-LCH)
SC, Latching (SM277A-MM-SC-LCH)
ST, Non-Latching (SM277A-ST)
SC, Non-Latching (SM277A-SC)
Single-Mode Fiber Optic:
ST, Latching (SM278A-SS-ST-LCH)
SC, Latching (SM278A-SS-SC-LCH)
ST, Non-Latching (SM278A-ST)
SC, Non-Latching (SM278A-SC)
RJ-45 Copper:
RJ-45 CAT5 (SM268A)
RJ-45 CAT6 (SM269A)
For empty slots, order...
Blank Panel, Front or Rear, 2U (SM279A-BLNK)
Questions? Contact our FREE Tech Support.
Learn More -
Black Box DKM FX Modular KVM Extender Transmitter Expansion Card - USB HID - For Video - 1 Pack - TAA Compliant
Regular Price: $197.60
Special Price $169.23
The DKM modular extenders are comprised of Modular Housing chassis with 2, 4, 6, or 21 slots and transmitter and receiver interface cards. The DKM extender setup provides the widest range of possible combinations, which makes it easy to customize for your specific application.
This DKM component is part of a modular system. You will need to contact Black Box to have it assembled to fit your application. To configure your DKM HD Video and Peripheral Matrix setup, call our FREE Tech Support.
Learn More -
Black Box Pro Switching System Plus A/B Switch Card, DB9 - For Switching Network - 3 x DB-9 - TAA Compliant
Regular Price: $258.01
Special Price $220.98
The DB9 A/B switch latching card allows you to switch between two DB9 connections. If power is lost the connection will retain its connected state. Controller Cards take up only one slot, and external power connects to the controller card, One slot is reserved for future use, leaving you with 16 slots for A/B Switch Cards.
All switch cards take up one slot except for the power A/B cards which take up two slots. Manage access to networks, implement backup systems for network and computer connections, or share peripherals and other equipment. Local features include LED status and manual switching.
Remote control (dry contact closure, RS232, and Ethernet) provides unmatched management flexibility. Gang Switch systems are used around the world to add secure access control and reliable backup for critical systems from space launch centers to stock exchange networks.
Ordering instructions:
First, order the chassis
- Gang Switch, 4U, 18-Card (SM960A)
Next order at least one power supply (order two for redundancy)
- External Power Supply 100- 240 VAC (SM961-PS)
- Internal Power Supply -48 VDC (SM760-PS1)
- Internal Power Supply Dual -48VDC (SM760-PS2)
Then select a Controller Card
- Ethernet (SNMP) (SM962A)
- Logic Only (SM964A)
Next, choose your A/B Switch Cards
- Serial DBxx: DB25 A/B Latching (SM965A)
- DB9 A/B Latching (SM966A)
- DB15 A/B Latching (SM967A)
- Power: 240 VAC 1 in 2 out (SM971)
- 120 VAC 2 in 1 out (SM973)
- Video: 75-ohm F-Connector (SM976A)
- Multimode: SC Latching (SM977A-SC)
- ST Latching (SM977A-ST)
- RJ45 Copper: CAT5e Latching (SM978A)
- CAT6 Latching (SM979A)
This product works with Power Supply (SM961-PS) A/B Switch Cards (SM965A, etc.)
Learn More
