Audio & Video Consoles/Extenders

Features:

• High-Density 19" 1U high enclosure features 16 ports
• Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTM for distances up to 1,500ft (460m)
• RJ45 video connectivity with optional NV-RJ45A RJ45 to screw terminal adaptors included
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports "up-the coax" type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Includes sixteen 2ft (60cm) coax jumper cables and rackmount hardware
• Limited lifetime warranty

The NVT Model NV-1613 is a 16 port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of the Model NV-1613 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Learn More

Features:

• Compact rack mountable 19" 1U high enclosure features 16-channels and is only 1.54" (40mm) deep
• Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTM for distances up to 1,500ft (460m)
• RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors (included)
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports "up-the coax" type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Limited lifetime warranty

The NVT Model NV-1613S is a compact 16-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) cable. Baseband (composite) signals of any type are supported.

"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of the Model NV-1613S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Learn More

Employing NVT Phybridge's StubEQ™ technology, the NV-1642 is a 16-channel active (amplified) hub that allows the transmission of real time monochrome or color video for distances up to 2,000ft (600m2,) using Category 5 or better unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, ground loops, and voltage transients, independent of video signal content.

The unparalleled interference rejection and low emissions allow long run video to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. this allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground-potential differences exist. With built-in transient protection, damaging voltage spikes are eliminated.

Learn More

Features:

• Adaptive DigitalEQTM fully automatic 4-band equalization provides adjustment-free equalization every time
• Compact rack-mountable 19" 1U high enclosure features 16 channels with 2 outputs per channel
• Full motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub; 1 mile (1,6km) when used with the NV-653T active transmitter; 1,000ft (300m) with shielded twisted-pair when used with any passive NVT transceiver or hub
• RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
• Exceptional interference rejection
• Built-in transient protection and ground-lifting
• Automatic compensation for reverse-polarity wiring
• At-a-glance per-channel diagnostics
• Compatible with qualified UTP cameras
• Includes sixteen 2ft (60cm) coax jumper cables, rack mount hardware and four NV-RJ45A adaptors
• Limited lifetime warranty

Employing NVT's latest generation DigitalEQTM technology, the NV-1672 is an 16-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, wiring polarity, ground loops, and voltage transients, independent of video signal content.

The unparalleled interference rejection and low emissions allow long run video to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. this allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground-potential differences exist. With built-in transient protection, damaging voltage spikes are eliminated.

Learn More

Features:

• Provides Class 2 SELV 28 VAC with up to 1 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5 cable for each camera
• Built-in distribution amplifier with 2 video outputs per channel
• Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
• Adaptive StubEQTM fully automatic 2-band equalization provides adjustment free equalization every time, no manual adjustments required
• Automatic-reset fault protection; transient protection
• Individually floating power outputs and differential video inputs ensure total ground-loop immunity
• Diagnostic LEDs show load/no load, miswires, overload conditions, and video status
• Limited lifetime warranty

The 16-channel NV-16PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQTM Active Receiver Hubs have individual floating 28VAC outputs that support at-distance camera loads up to 1 Amp per channel for cable runs up to 1,500ft (460m). A built-in StubEQTM video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: automatic-reset fault protection, transient protection, ground loop free individually floating outputs and power and video diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVT's lifetime warranty.

Learn More