Audio & Video Consoles/Extenders

Extends 1080p signals up to 130 feet to eight HDMI displays over a single Cat6 cable

• Extends high definition video signals up to 130ft (40m) over economical Cat6 cabling to up to eight HDMI displays
• Delivers crystal clear Full HD content up to 1080p@60Hz resolution
• IR control through Cat6 allows you to control the HDMI source device at the remote display location
• High quality durable metal housing with ventilation panels provides excellent heat dissipation to ensure reliable performance and system stability during long hours of operation
• Plug-n-Play installation, no software installation or hardware setup is required

More from the Manufacturer

Wirelessly transmits HDMI signals with stereo audio up to 66 feet, use with 10x1 1080p Wireless HDMI Extender - Kit (part # CE-H24D11-S1) sold separately

• Wireless 5G technology reliably extends HDMI signals up to 66 feet to a remote HDMI display
  Note: The transmission distance will vary depending on building layout, electronic interference, walls and partitions, other environmental conditions, and may be much less than the maximum
• Allows you to select and switch between up to 10 HDMI sources to broadcast on one HDMI display. Requires 10x1 1080p Wireless HDMI Extender - Kit (part # CE-H24D11-S1) sold separately and additional 10x1 1080p Wireless HDMI Extender - Transmitter (part # CE-H24E11-S1), sold separately
• Supports video resolutions up to 1080p Full HD for stunning and crystal clear images
• Perfect solution for meetings, conference rooms, home entertainment and multi-media education
• Switching button on each transmitter unit allows easy push button device selection between multiple source devices

Extends HDMI signals to four HDMI Receivers over CAT5e/6 cable up to 198ft with resolution auto-scaling, IR control, and Power over Cable support

• Extends Full HD 1080p HDMI signals up to 198ft (60m) and 4K@60Hz signals up to 114ft (35m) over CAT5e/6 cable
• Supports 4K@60Hz YUV 4:4:4 8-bit, 4K@60Hz HDR YUV 4:2:0 10-bit
• Supports PoC (Power over Cable) technology which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit
• Transmitter unit supports two HDMI loop-outs for addition local display connections
• Receiver unit supports 2 HDMI outputs for more display connections
  • Note: Additional Receiver (part# CE-H24P11-S1) sold separately.
• Supports EDID management for increased device compatibility
• Supports resolution auto-down scaling from 4K to 1080p allowing displays of different capabilities to be connected simultaneously
• Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission offers the best audio signal
• DTS-HD Master Audio and Dolby TrueHD high bit rate audio for true sound compatibility
• Supports full bi-directional IR pass-through signal from 30KHz to 56KHz frequency

More from the Manufacturer

Receives HDMI signals over CAT5e/6 cable up to 198ft with resolution auto-scaling, IR control, and Power over Cable support

• Receives Full HD 1080p HDMI signals up to 198ft (60m) and 4K@60Hz signals up to 114ft (35m) over CAT5e/6 cable
  
  • Provides additional receiver unit for HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender with Auto-scaling (part# CE-H24N11-S1) sold separately
• Supports 4K@60Hz YUV 4:4:4 8-bit, 4K@60Hz HDR YUV 4:2:0 10-bit resolutions
• Supports PoC (Power over Cable) technology which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit
• Receiver unit supports 2 HDMI outputs for more display connections
• Supports EDID management for increased device compatibility
• Supports resolution auto-down scaling from 4K to 1080p allowing displays of different capabilities to be connected simultaneously
• Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission offers the best audio signal
• DTS-HD Master Audio and Dolby TrueHD high bit rate audio for true sound compatibility
• Supports full bi-directional IR pass-through signal from 30KHz to 56KHz frequency

Receives HDMI signal up to 120 meters away over a single Cat6 cable with IR support

• Receives HDMI A/V signals up to 394ft (120m) away over economical Cat6 cabling
• Delivers Full HD video content up to 1080p @60Hz
• Features direct 1-to-1 connection or 1-to-multiple through dedicated unmanaged Gigabit network routers or switches (not included). With HDbitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. Note: Requires HDMI HDbitT Over CAT6 Extender with IR & Loop-out - 120m, part # CE-H24B11-S1, sold separately.
• IR remote control over CAT 6 allows to remotely control the HDMI source device from the remote display side
• High quality metal housing with ventilation panels improve heat dissipation and ensure system stability during long hours of operation
• Built-in power led indicator provides easy power status monitoring
• Plug-n-Play installation, no software installation or hardware setup is required