Audio & Video Consoles/Extenders

The KDS-EN2T is an IP-based transmitter for HDMI signals. Using JPEG2000 compression technology, the KDS-EN2T sends a visually lossless HD image with digital stereo over a 1000BaseT LAN to a KDS-EN2R receiver for multicasting, video wall and digital signage applications.

• High Flexibility - Flexible and scalable HDMI 1080p for video broadcasting with Gigabit Ethernet LAN.
• High Scalability - Up to 9 transmitters and more than 81 receivers possible in a video wall system, as well as over 200 receivers from each transmitter in multicasting mode.
• Multicasting and Broadcasting Architecture - Each channel requires about 55Mbps.
• Cost Efficient Infrastructure - Transmits an HDMI signal over one CAT5e/6/7 cable.
• HDTV Compatible.
• Controls - Group ID can be defined either via the built-in DIP-switches or by using the remote utility.
• RS-232 Pass-Thru - Controls the HDMI display from the transmitter side.
• Compact DigiTOOLS® - With a built-in mounting plate for versatile installation.

The KW-14R is a high-definition, wireless, HDMI receiver for indoor use. Up to four KW-14R receivers can receive from one KW-14T transmitter and up to three KW-14T transmitters can be paired with one KW-14R receiver.

• Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel), Deep Color up to 12-bit.
• Secure Link - Uses AES-128 bit encryption.
• Connection Capacity - Up to four receivers can receive from one transmitter simultaneously; up to three transmitters associated with one receiver at any given time.
• Transmission Range - Up to 30m (100ft) including through walls and furniture.
• Automatic Frequency Selection - Selects the most suitable frequencies to prevent RF interference.
• Auto EDID Adjustment - To allow multi-screen support.
• IR Remote Control - Enables the OSD menu to be displayed on the output display.
• OSD (On Screen Display) - For simplified setup and configuration.
• HDCP Compliant - HDCP sources are supported only when all connected displays support HDCP.
• Zero Latency.
• Automatic Sleep Mode - After three minutes when no input or link is detected.

APPLICATIONS

• Meeting rooms
• Presentation and multimedia applications
• Short range video and audio distribution

OPS-1 is an OPS-compatible HDBaseT receiver for displays and AV devices with standard Intel OPS-compatible card slots. It is a high-performance, extended-reach HDBaseT 1.0 receiver for full HD HDMI, Ethernet and RS-232 signals over twisted pair. It extends video signals to up to 100m (330ft) over CAT copper cables at up to 1080p@60Hz video resolution.

• High Performance Standard Extender - Professional HDBaseT extender for providing extended-reach signals over twisted-pair copper infrastructures. OPS-1 is a standard extender that can be directly plugged to HDBaseT-compliant OPS-slot of market-available displays and AV products. For optimum extension reach and performance, use recommended Kramer cables.
• HDMI Signal Extension - HDMI 1.4 and HDCP 1.4 compliant. Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, and 3D. EDID and CEC signals are passed through from the source to the display.
• Multi-channel HDMI Audio Extension - Up to 8 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
• Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
• Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
• Cost-effective Maintenance - Status LED indicator to facilitate easy local maintenance and troubleshooting.
• Easy and Elegant Installation - Directly plugged into OPS-compatible AV devices, drawing power from the device. Provides single cable connectivity for all HDBaseT signals.

• Long-distance AV and LAN signal extension for multi-room, large dividable auditoriums and lecture hall connectivity

The TP-125xl is an extended range twisted pair transmitter for computer graphics video, unbalanced stereo audio and bidirectional RS-232 control command signals. It converts the input signals to a twisted pair signal and transmits them over CAT 5 cable to a compatible receiver.

• Max. Resolution - WUXGA & 1080p.
• HDTV Compatible.
• System Range - More than 820ft (more than 250m).
• EDID Capture - Copies and stores the EDID from a display device.
• Cable - We recommend the use of Kramer's BC-XTP high quality skew-free, unshielded twisted pair (UTP) cable. When using UTP cable, it is advisable to ensure that the cable is installed far away from electric cables, motors and so on, which are prone to create electrical interference.
• Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit.

The TP-46N is a twisted pair receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45 transmitter converts an audio and video signal to a twisted pair signal and the TP-46N converts the twisted pair signal back into audio and video signals.