Audio & Video Consoles/Extenders
-
C2G Short Range VGA+3.5mm Audio over Cat5 Extender Kit - 1 Input Device - 2 Output Device - 100 ft Range - 2 x Network (RJ-45) - 1 x VGA In - 4 x VGA Out - SXGA - 1280 x 1024 - Twisted Pair - Category 6
The VGA+3.5mm Audio over Cat5 kit allows you to extend VGA video and stereo audio signals over a single Cat5/Cat5e/Cat6 unshielded twisted pair cable up to 100ft without signal degradation at a 1280x 1024 resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. Kit includes both the transmitter and receiver units
Learn More$139.03 -
C2G 4K HDMI HDBaseT + Serial RS232 over Cat6 Extender Box Receiver TAA - 1 Input Device - 1 Output Device - 250 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - 4K - 4096 x 2160 - Twisted Pair - Category 6a - Desktop - TAA Compliant
The HDMI + Serial RS232 over Cat allows HDMI audio/video and Serial RS232 signals to be extended over a single Cat5e, Cat6 or Cat6a cable up to 230ft at a 4K (4096 x 2160 at 30Hz, 4:4:4) resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The transmitter and receiver are available in either a wall plate or box form factor and are interoperable allowing this solution to meet the needs of the installation environment. In addition, this solution utilizes TruChoice™ power, which allows power to be supplied over the Cat cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display's capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. The DB9 Serial RS232 port supports full-duplex data communication at 230Kbps and is fully compatible with all RS232 protocols. Point-to-point or multi-drop data communication is supported.
Learn More$285.33 -
C2G TruLink VGA+3.5mm Audio over Cat5 Box Transmitter - 1 Input Device - 2 Output Device - 300 ft Range - 2 x Network (RJ-45) - 1 x VGA In - WUXGA - 1920 x 1200 - Twisted Pair - Category 6 - TAA Compliant
The VGA+3.5mm Audio over UTP Box Transmitter, when used in conjunction with a receiver (29366 or 29368 - NOT INCLUDED), allows you to extend a VGA signal over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft without signal degradation at 1920x1200 or 1920x1080 resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The transmitter and receiver come in either wall plate or box form factors and are inter-operable allowing you to choose the form factors that are best suited for the application. In addition, this solution utilizes phantom power providing you the flexibility to power at either the transmitter or receiver end.
The EDID copy feature ensures compatibility with any monitor. Built-In power surge protection and high ground loop immunity ensure high performance signal extension.
Learn More$151.59 -
C2G TruLink VGA+3.5mm Audio over Cat5 Box Receiver - 2 Input Device - 1 Output Device - 300 ft Range - 2 x Network (RJ-45) - 1 x VGA Out - WUXGA - 1920 x 1200 - Twisted Pair - Category 6 - TAA Compliant
The VGA+3.5mm Audio over UTP Box Receiver, when used in conjunction with a transmitter (29365, 29367 or 29369 - NOT INCLUDED), allows you to extend a VGA and 3.5mm audio signal over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft without signal degradation at 1920x1200 or 1920x1080 resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The transmitter and receiver come in either wall plate or box form factors and are inter-operable allowing you to choose the form factors that are best suited for the application. In addition, this solution utilizes phantom power providing you the flexibility to power at either the transmitter or receiver end.
EQ (sharpness) adjustments can be made for optimal signal clarity. Built-In power surge protection and high ground loop immunity ensure high performance signal extension.
Learn More$161.14 -
C2G Dual 4K HDMI HDBaseT + RS232 Single Gang Wall Plate Transmitter - 12 Input Device - 230 ft Range - 1 x Network (RJ-45) - 2 x HDMI In - 4K UHD - Twisted Pair - Category 7 - Wall Plate
The Dual HDMI HDBaseT + RS232 over Cat Extender Single Gang Wall Plate Transmitter - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This transmitter is an ideal part of an HDBaseT solution where HDMI video and audio in conference rooms, classrooms, lecture halls, and many other installation needs are far beyond the length limitations of standard HDMI cabling.
This transmitter extends HDMI over a single Cat5e, Cat6, or Cat6a network patch cable. Extend 4K HDMI up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI up to 130 feet using a Cat6a cable.
This HDMI HDBaseT transmitter is HDCP 2.2 compliant, making sure that the connection from the source is secure. Multi-channel audio formats are supported, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X. With one-way Power over Cable (PoC) support, the transmitter gets its power from the receiver, allowing for greater flexibility in installations. Advanced users can control bi-directional IR and RS232 pass through.
Learn More$363.71 -
C2G 4K HDMI HDBaseT + USB-B and RS232 Wall Plate Transmitter to Receiver - 1 Input Device - 1 Output Device - 230 ft Range - 2 x Network (RJ-45) - 5 x USB - 1 x HDMI In - 1 x HDMI Out - 4K UHD - Twisted Pair - Category 7 - Wall Plate
HDMI® HDBaseT + USB-B and RS232 over Cat Extender Single Gang Wall Plate Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where USB must also be extended alongside HDMI video and audio to interactive whiteboards and displays in conference rooms, classrooms, lecture halls, and many other installation needs far beyond the length limitations of standard HDMI cabling.
This HDBaseT kit extends HDMI and high speed USB 2.0 over a single Cat5e, Cat6, or Cat6a network patch cable. Extend 4K HDMI up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI up to 130 feet using a Cat6a cable. Extend USB 2.0 pass through up to 230ft, connecting up to 4 USB devices to the receiver.
This kit is HDCP 2.2 compliant, making sure that the connection from the source is secure. Multi-channel audio formats are supported, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X. High speed USB 2.0 pass-through supports up to 230ft for KVM control of devices such as USB cameras, keyboards, mice, etc. With one-way Power over HDBaseT (PoH) support, the transmitter gets its power from the receiver, so no additional power adapter is required, allowing for greater installation flexibility. Advanced users can control RS232 pass-through to pass RS232 commands between the wall plate and the receiver. The receiver toggle switch also allows for the selection of upgrades that can upgrade both the wall plate and receiver.
Learn More$952.94
