Audio & Video Consoles/Extenders
-
KanexPro Single HDMI 2.0 Wallplate over HDBaseT 70M w/ IR & POC Receiver Set - 1 Input Device - 1 Output Device - 229.66 ft Range - 1 x Network (RJ-45) - 1 x HDMI In - 4K UHD - Twisted Pair - Category 6
The KanexPro WP-EXTHDBTKIT is a US Decora style single gang HDMI 2.0® wall plate transmitter - receiver set designed for connecting one HDMI device such as a laptop, Blu-ray, or a 4K media player remotely over CAT5/6 up to 230 ft. (70 meters). The outputs is via HDBaseT port and the receiver is included in the box. It supports full 18 Gbps bandwidth with true 4K video resolutions up to 4/60Hz, HDCP 2.2 compliant and will extend 4K up to 40m delivering color sampling rate of 4:4:4.
PoC & Control
The wall plate transmitter supports PoC - power over cable requiring only power supply from the Receiver. Additional receivers can be purchased separately, part# EXT-WP70POC. It also supports bi-directional IR control and RS-232 control for devices to and from the display.
Applications:
Ideal for use with court rooms, classrooms, conference rooms or showrooms where audio-visual devices can be extended from a remotely located HDMI source device. This single-gang HDMI wall plate can be used anywhere to enhance signal integrity over CAT5e/6 cabling.
Learn More$379.68 -
Club 3D CSV-7200 Display Receiver - 1 Input Device - 2 Output Device - 1 x USB - DisplayPort - 4K - 3840 x 2160
Club 3D CSV-7200 Display Receiver - 1 Input Device - 2 Output Device - 1 x USB - DisplayPort - 4K - 3840 x 2160 Learn More -
ComNet 2 Channel Analog and IP Video over COAX Receiver - 1640.42 ft Range - Twisted Pair, Coaxial - Category 5
The ComNet™ CL(T,R)VE(1,2)COAX[POE][/M] is a communications link that combines composite analog baseband video and 10/100T(X) Ethernet on a single RG59 coaxial cable and transmits it up to 500 meters. The device is particularly suited to applications where the addition of IP Video to an existing analog video system is required. The CLTVE1COAXPOE/M model can provide power to the IP device via PoE.
Learn More$664.90 -
ComNet Video Extender Transmitter/Receiver - 8202.10 ft Range - Coaxial - CCTV System, IP Camera - Surface-mountable, Rack-mountable
The ComNet™ FVT15M2 video transmitter/data receiver and the FVR15M2 video receiver/data transmitter support the simultaneous transmission of video and return data over two multimode optical fibers. These modules are universally compatible with all major CCTV camera manufacturers and supports RS232 and RS422 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are interchangeable between stand-alone or card mount configurations.
Learn More$738.78 -
ComNet Video Extender Receiver - 1 Output Device - 13123.36 ft Range - Optical Fiber - CCTV System
The ComNet™ FVR10 video receiver detects an AM video signal on one multimode optical fiber. The receiver utilizes Manual Gain Control and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.
Learn More$189.61 -
ComNet Video Transmitter (1310 nm) - 9842.52 ft Range - Optical Fiber - Rack-mountable - TAA Compliant
The ComNet FVT/FVR1001 series video transmitter/ receiver supports the transmission of short-haul quality 10-bit digitally encoded video over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers.
Features for FVT/FVR1001 Series
- Full color compatibility
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
- Compatible with NTSC, PAL, or SECAM Video Standards
- 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
- Standard ComFit models are hot-swappable.
$583.64
