Network & Communication
-
Vision TC-HDMI31 HDMI Switcher - 4096 x 2160 - 4K - 3 x 1 - Display - 1 x HDMI Out
Vision's professional-grade HDMI switcher connects to up to three sources and switches between them with ease. Ideal for corporate installations where fast switching and reliable HDCP management is important.
Fast Switching
Automatic EDID (extended display identification data) management and fast switching.3D Support
Supporting resolutions of up to 4K2K@60Hz, this switcher easily supports 3D.High Bandwidth
The TC-HDMI31 has a bandwidth of up to 18Gbps - three times faster than our previous model!Plug and Play
This product uses the latest switching chipset to ensure it has excellent compatibility with a wide range of source devices.Remote Control
An IR remote control is included which has direct select buttons, or toggle up and down buttons, along with discreet on and off buttons.RS-232 Control
The HDMI switcher can be controlled by a control system via RS-232.Stable Performance
Learn More
A metal heat sink keeps the circuit cool to ensure stable performance.$132.55 -
Vision TC-HDMIIPRX Video Extender Receiver - 1 Output Device - 393.70 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6
The TC-HDMIIP converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications. Each receiver on a network uses a compact 18Mbps bandwidth thanks to the H.264 compression.
One to Many
Need to display one source on many screens? This product is perfect! It multi-casts, so you can have one transmitter for the source, and up to 253 x receivers can set on the network - one for each display. Only one transmitter per network.Point to Point without LAN
Connect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 120m (394 ft) long, or 150m (492 ft) on a high quality cable.Maximum Length
If using a LAN the signal will be repeated by each node on the network, resulting in unlimited length.Resolution
Fully HDCP 1.2 compliant, it supports resolutions up to 1920 x 1080 (also known as 1080P).Audio
Digital audio encoded on the HDMI signal is transmitted.IR Pass-Through
Control the source device from the display with the IR pass-through. An IR blaster and receiver cable is included, and it supports standard 20-60kHz IR signals.Plug and Play
EDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.EQ-Free
The signal passes through a network without the normal skew and balancing distortion.H.264 Compression
Video is compressed using the H.264 protocol - the same type of compression used on Blu-Ray. Images are full colour with smooth motion.LAN Protocols
Despite using the standard IP protocols you don't need to be a network engineer. All end points must be on the same subnet... that's all you need to know. For best results use a stand-alone network for this system.Dual-Power
This product requires a power supply for each transmitter and receiver. It does not use PoE.Unmanaged Switch
Learn More
Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled, but in this case no advanced switch setup is required, so a low cost unmanaged switch can be used. -
Vision TC-HDMIIPTX Video Extender Transmitter - 1 Input Device - 393.70 ft Range - 1 x Network (RJ-45) - 1 x HDMI In - Full HD - 1920 x 1080 - Twisted Pair - Category 6
The TC-HDMIIP converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications. Each receiver on a network uses a compact 18Mbps bandwidth thanks to the H.264 compression.
One to Many
Need to display one source on many screens? This product is perfect! It multi-casts, so you can have one transmitter for the source, and up to 253 x receivers can set on the network - one for each display. Only one transmitter per network.Point to Point without LAN
Connect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 120m (394 ft) long, or 150m (492 ft) on a high quality cable.Maximum Length
If using a LAN the signal will be repeated by each node on the network, resulting in unlimited length.Resolution
Fully HDCP 1.2 compliant, it supports resolutions up to 1920 x 1080 (also known as 1080P).Audio
Digital audio encoded on the HDMI signal is transmitted.IR Pass-Through
Control the source device from the display with the IR pass-through. An IR blaster and receiver cable is included, and it supports standard 20-60kHz IR signals.Plug and Play
EDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.EQ-Free
The signal passes through a network without the normal skew and balancing distortion.H.264 Compression
Video is compressed using the H.264 protocol - the same type of compression used on Blu-Ray. Images are full colour with smooth motion.LAN Protocols
Despite using the standard IP protocols you don't need to be a network engineer. All end points must be on the same subnet... that's all you need to know. For best results use a stand-alone network for this system.Dual-Power
This product requires a power supply for each transmitter and receiver. It does not use PoE.Unmanaged Switch
Learn More
Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled, but in this case no advanced switch setup is required, so a low cost unmanaged switch can be used.
