Information Technology
-
Ubiquiti Long-Range Ethernet Repeater - 10/100/1000Base-T
Long-range Gigabit Ethernet adapter that receives PoE/PoE+ and offers passthrough PoE output.
- Extend PoE connections up to 1 km
- (1) GbE RJ45 port for PoE/PoE+ input
- (1) GbE RJ45 port for passthrough PoE output
- 10kA+ surge protection
- Works reliably in extreme temperatures (-40 to 80° C)
-
Ubiquiti airFiber 500 Mbit/s Wireless Access Point - 5 GHz
Ten years ago, Ubiquiti sparked a global Wireless ISP revolution with the introduction of NanoStation® - a cost-disruptive 802.11 Wi-Fi long range outdoor plug and play radio. The NanoStation broke down technical and financial barriers for WISP's around the world, enabling nearly any operator to deploy scalable networks and grow profitable business models.
Learn More
As bandwidth demands and scalability challenges increased through the years, Ubiquiti responded with performance-enhancing innovations such as the airMAX® TDMA protocol, PRISM® active RF filtering, and GPS synchronization - all working to extract every ounce of potential from consumer 802.11 Wi-Fi chipsets.
However, we always knew that one day growing subscriber bandwidth demands combined with an increasingly crowded unlicensed RF spectrum would expose the fundamental limitations of 802.11 Wi-Fi silicon and ultimately threaten the survival of our industry.
Years ago, a core group of engineers at Ubiquiti set out to make sure this day would never come. We began an ambitious plan that would span millions of man hours of development and tens of millions of dollars of investment. The result was a new technology and ASIC chipset created from the ground floor up specifically for the Wireless ISP industry - a technology we believe positions our Industry to succeed in the new challenging landscape of the future. Welcome to what we call the Long Term Ubiquiti vision, or simply LTU™.$508.47 -
Ubiquiti Bullet B-DB-AC IEEE 802.11ac 460 Mbit/s Wireless Access Point - 2.40 GHz, 5 GHz - 1 x Network (RJ-45) - Gigabit Ethernet
Ubiquiti Networks designed airMAX ac radios for high performance and ease of installation. You have the freedom to deploy the Bullet ™AC anywhere in the world, as it allows for a high degree of flexibility in configuring channel bandwidths (subject to local country regulations).
Zero-Variable Deployment
The Bullet AC eliminates the need to use RF cables and requires no special antenna or tools to install. There are no radio card / host board issues, no RF cable quality concerns, no mechanical stability concerns, and no enclosure mounting requirements. With the Bullet AC, operators can just plug in and go.
Software
airOS® 8 is the revolutionary operating system for Ubiquiti® airMAX ac products.
Powerful Wireless Features
- Access Point PtMP airMAX Mixed Mode
- airMAX ac Protocol Support
- Long-Range Point-to-Point (PtP) Link Mode
- Selectable Channel Width
- PtP: 10/20/30/40/50/60/80 MHz
- PtMP: 10/20/30/40 MHz
- Automatic Channel Selection
- Transmit Power Control: Automatic/Manua
- Automatic Distance Selection (ACK Timing)
- Strongest WPA2 Security
- airMagic® Channel Selection Tool
- Redesigned User Interface
- Dynamic Configuration Changes
- Instant Input Validation
- HTML5 Technology
- Optimization for Mobile Devices
- Detailed Device Statistics
- Comprehensive Array of Diagnostic Tools, including RF Diagnostics and airView® Spectrum Analyzer
airMAX ac devices feature a multi -radio architecture to power a revolutionary RF analytics engine.
An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry
Data from the spectrum analysis and RF performance monitoring is displayed on the Dashboard and airView Spectrum Analyzer.
Real-Time Reporting
airOS 8 displays the following RF information:
- Persistent RF Error Vector Magnitude (EVM) constellation diagrams
- Signal, Noise, and Interference (SNI) diagrams
- Noise Floor diagrams
- Expected/Current Rate diagrams
$116.23 -
Ubiquiti Intelligent WISP Control Point with FiberProtect - 5 Ports - 5 RJ-45 Port(s) - PoE Ports - 1 - Gigabit Ethernet - Pole Mount
Intelligent WISP Control Point with FiberProtect
The EdgePoint offers an innovative combination of robust routing performance, fiber backhaul capability, and the convenience of passive PoE support.
Breakthrough in Tower DeploymentThe EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.
Purpose-Built for WISP ControlThe first application-specific designed WISP control point, the EdgePoint combines the advanced routing capabilities of EdgeMAX with fiber backhaul and versatile powering capabilities.
All-in-One DesignA single, compact controller eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.
Advanced Routing ApplicationsPowerful routing features - such as link balancing - provide redundancy and increased performance for outdoor wireless links.
Learn More$169.49 -
Ubiquiti SFP+ Module - For Data Networking, Optical Network - 2 x LC Duplex Network - Optical Fiber - Multi-mode - 10 Gigabit Ethernet - 2 Pack
The 10 Gbps Multi-mode Optical Module is a duplex transceiver that delivers up to 10 Gbps speed over distances up to 300 meters.
Learn More -
Ubiquiti SFP+ Module - For Data Networking, Optical Network - 2 x LC Duplex Network - Optical Fiber - Multi-mode - 10 Gigabit Ethernet - 20 Pack
The 10 Gbps Multi-mode Optical Module is a duplex transceiver that delivers up to 10 Gbps speed over distances up to 300 meters.
Learn More$464.89
