Information Technology
-
Icy Dock MB153SP-B 3 in 2 SATA Internal Backplane Raid Cage Module - 3 x HDD Supported - RAID Supported - 3 x Total Bays - 3 x 3.5" Bay - Internal
Introducing the MB153SP-B, a 3-in-2 SATA internal RAID backplane for 3.5" SATA hard drives. This is a lite version of the MB45X series by removing the monitoring features and reducing the overall cost, while keeping the same 3 year warranty and the core tray system for hot swapping and maintenance are kept for the best reliability in the market.
Slimmed Down Design
The MB153SP-B has been redesigned to be a lighter module, while maintaining the same level of quality, build, and service you'd expect from an Icy Dock product. While the design has gone through some changes, the space saving design is still established. The backplane module allows up to 3 x 3.5" SATA III hard drives, while only consuming two 5.25" bays. The module has also been redesigned for the type of power connector accepted. 15 pin SATA power is used to provide better accessibility for various host systems.
Learn More$141.99 -
Icy Dock FatCage MB155SP-B 5x3.5" in 3x5.25" Hot Swap SATA HDD Cage - 5 x HDD Supported - Serial ATA/600 Controller - RAID Supported - 5 x Total Bays - 5 x 3.5" Bay - Internal
Introducing the FatCage MB155SP-B, a 5-in-3 SATA 6Gbps hot swappable internal RAID backplane cage. This is the lite version of the MB45X series by removing the monitoring features, increasing the cooling performance, and reducing the overall cost, while keeping the same 3 year warranty and the core tray system for hot swapping and maintenance are kept for the best reliability in the market.
Learn More$193.56 -
Icy Dock EZConvert MB703M2P-B M.2 SATA SSD to 2.5" SATA SSD Converter Adapter
ICY DOCK's EZConvert MB703M2P-B is a complete solution to convert any M.2 SATA SSD into the exact dimensions and port locations as a standard 2.5" hard drive or SSD (9.5mm height). Designed for compatibility, it accepts all M.2 sizes from 30mm to 80mm in length, mounting them without screws or tools, and allows these drives to be installed anywhere that accepts a bare 2.5" drive, such as a hot-swap bay, 2.5" mounting bracket, or in any of ICY DOCK's 2.5" drive enclosures. MB703M2P-B protects the delicate circuit board of your M.2 SSDs from bumps and drops.
Enable Hot-Swap
Because M.2 SSDs are not designed to be hot-swapped, their connectors are very delicate, typically rated for only 250 insertion/removal cycles. When used with the EZConvert MB703M2P-B, M.2 SATA SSDs can be hot-swapped without putting any wear on the internal connector, instead using ICY DOCK's strong hot-swap connector rated for 10,000 insertion/removal cycles. Hot-swap makes it easy to add, remove, and replace drives without the need to restart the system.
Perfect Compatibility
EZConvert MB703M2P-B accepts any 30mm-80mm M.2 SATA SSD and gives it the exact same dimensions, port locations, and screw-hole locations as a standard 9.5mm 2.5" SSD.
The 1-piece lid has a sturdy EZ-press latch, to stand up to frequent drive swaps. Simply press the latch in to open the lid, revealing the drive bay for easy installation, removal, or drive replacement.The adjustable M.2 locker slides to accommodate all standard M.2 SATA SSD lengths, including 2230 (30mm), 2242 (42mm), 2260 (60mm), and 2280 (80mm). The locker clips into the SSDs screw hole to secure the drive without the need for screws or tools.
Because the MB703M2P-B uses the standardized 2.5" form factor, it can be installed into any 2.5" backplane or hot-swap bay, such as our flexiDOCK, ExpressCage, or ToughArmor models. This lets you expand the capabilities of your existing 2.5" devices by adding M.2 SATA SSD support to them.
ICY DOCK's EZConvert MB703M2P-B not only allows you to convert M.2 SATA drives into a 2.5" drive form factor, but also, when used in combination with an aftermarket SATA to USB 3.1 adapter cable (not included), you can easily convert the MB703M2P-B into an external M.2 SATA drive to take your data on the go.
Built to Last
MB703M2P-B's body and lid each use a 1-peice design, constructed from a single piece of strong ABS plastic, to strengthen the enclosure and give your drive a physical layer of protection against drops and bumps. One-piece construction is preferred over multiple pieces, as the connection between two pieces creates a weak point that is prone to failure.
Packed with Features
The lid and body have ventilation holes amply placed throughout the enclosure, working with your computer's cooling system to cool the drive and protect it from overheating damage, which can lead to data loss.
ICY DOCK's EZConvert MB703M2P-B was specifically designed to provide maximum cooling efficiency to prevent speed throttling on SATA M.2 drives. Air vent holes sit right underneath the SATA M.2 drive, giving the drive enough air flow while doing intensive reads and writes. Moreover, to allow more air circulation, these air venting holes can be removed physically to reveal a cutout, allowing users to install M.2 drive heatsinks or simply leave it open for an increased cooling effect.The MB703M2P-B supports the full SATA III bandwidth specifications of up to 6Gbps, letting you take full advantage of the fastest M.2 SATA SSDs available.
Learn More -
Icy Dock FatCage RAID MB901SPR-B DAS Storage System - 2 x HDD Supported - 0 x HDD Installed - 2 x SSD Supported - 0 x SSD Installed - Serial ATA/600 Controller - RAID Supported 1 - 4 x Total Bays - 2 x 5.25" Bay - 2 x 2.5"/3.5" Bay - Internal
The FatCage MB901SPR-B is a dual bay RAID enclosure that supports 2 x 2.5" or 3.5" SATA hard drive or SSD in a 2 x 5.25" optical drive bay of your computer/workstation system. With the built-in hardware RAID 1 chipset and easy to read RAID status LED indicators, you can conveniently mirror the 2.5" drives for data redundancy without adding a RAID card or RAID monitoring software on the host end. Also, Central Process Unit (CPU) is normally required to calculate a RAID but, alternatively, having a RAID chipset on the enclosure frees up the CPU overhead and speeds up the whole system. Therefore MB901SPR-B is a perfect removable drive enclosure for mission-critical computer systems that not only make your system work faster but also provide protection against your critical data.
Built-In RAID 1 (Safe Mode)
With the built-in JMS562 hardware RAID chipset, you can effortlessly add two HDD/SSD RAID array to any system without needing a RAID controller card. The FatCage RAID MB901SPR-B automatically mirrors 2 x 2.5" or 3.5" SATA HDD/SSD for data redundancy to prevent system downtime caused by a single hard drive failure.
Advanced RAID Status LED Indicators
The FatCage RAID MB901SPR-B is equipped with easy-to-read RAID status LED indicators for RAID health monitoring during the operation so users can quickly grasp the live RAID status without installing the RAID monitoring software. However, if your application requires using RAID monitoring software, it is available for download and installation on Windows/Mac computers.
EZ-Tray Removable Drive Trays
The FatCage RAID MB901SPR-B features removable EZ-Tray drive trays, allowing the user to install or remove drives without opening the computer case or powering off the computer. The EZ-Tray supports both 2.5" SSD/HDD and 3.5" hard disk drive and compatible with FatCage and DataCage enclosures include DataCage MB876SK-B (1x Drive), FatCage MB153SP-B (3x Drive), and MB155SP-B (5x Drive). This allows you to continue using the same trays from these enclosures and exchange drives between systems without unmounting the drive from the tray.
EMI Grounding
Making sure your drives are properly grounded is important, especially through many drive swaps. Without it, there is a high possibility that there may be static shocks that could damage your drives or may result in losing your important data. Our EMI grounding technology ensures a stable and safe environment for the HDD/SSD used, which improves reliability.
Packed with Features
Large ventilation holes are placed around the enclosure to work alongside your system's cooling system to keep your drives at optimal temperatures.
The MB901SPR-B supports 15 pin power cables with locking latches, so you will never need to worry about the cables unintentionally discounting from your enclosure. Once the cables are connected, they will stay in place
Learn More$216.06 -
Icy Dock EZConvert Ex Pro MB987M2P-1B M.2 to PCI Express Adapter
The EZConvert Ex Pro MB987M2P-1B provides an efficient, cost-effective, and simple way to upgrade your data storage system to high-speed M.2 PCIe NVMe SSD through PCIe 4.0 x4 / x8 / x16 expansion slot.
Space-Saving Design
Utilizing the PCIe expansion slot, the MB987M2P-1B lets you install a M.2 PCIe NVMe SSD on the PCIe slot to save space. MB987M2P-1B is a perfect solution for systems that lack additional drive space, such as embedded computers, in-vehicle PCs, server rackmounts, compact gaming PCs, and workstation PCs.
State of the Art Tool-less Drive InstallationThe EZConvert Ex Pro accommodates all standard M.2 PCIe NVMe SSD drive length, including 2230 (30mm), 2242 (42mm), 2260 (60mm), 2280 (80mm), and 22110 (110mm). The unique M.2 adjustable locker clips into the M.2 SSD's screw hole to safely secure the drive without using tools or screws, saving you the time of dealing with tiny easy-to-lose screws while protecting your drive from vibration and movement damage.
Perfect Solution for Next-Gen PCIe SSD
The PCIe 3.0/4.0 interface provides power and data transfer simultaneously, which ultimately reduces cable clutter in the system. The blazing-fast PCIe 4.0 x4 offers 64Gb/s transfer speed is 10 times faster than SATA III standards, making the MB987M2P-1B an ideal solution for data-intensive applications such as image processing, machine learning, cloud computing, data mining, and gaming.
The EZConvert EX Pro MB987M2P-1B is designed for the PCIe 4.0 x4 slot. It is also compatible with PCIe 4.0 x8, and x16 slots.
Optimal Cooling
The specialized aluminum lid acts as a heat sink to keep M.2 NVMe SSD at safe temperatures, even under heavy load.
The included thermal pad can be placed on the aluminum heatsink lid's underside for enhanced heat dissipation.
The large ventilation cut out underneath the M.2 SSD provides maximum airflow throughout the drive offers optimal cooling efficiency.
Support Different System Heights
The PCIe slot bracket of the MB987M2P-1B can be swapped between full and low profile for flexible system installation. If you have a need to customize the units by swapped an aftermarket low profile PCIe bracket (not included), go right on ahead --we've added the necessary screw hole spacing for this purpose.
Packed with Features
The MB987M2P-1B is equipped with drive activity LED indicator that shows the drive power and activity. The LED is automatically powered off when no drive is installed to save power.
The optional 2-pin drive activity signal output (cable not included) allows you to transfer the drive activity signal to the front panel of the computer to monitor the drive activity.
Learn More -
Icy Dock ToughArmor RAID MB902SPR-B DAS Storage System - 2 x HDD Supported - 0 x HDD Installed - 2 x SSD Supported - 0 x SSD Installed - Serial ATA/600 Controller - RAID Supported 1 - 2 x Total Bays - 2 x 2.5" Bay - Internal
The ToughArmor RAID MB902SPR-B is a ruggedized full metal dual bay removable drive enclosure that supports 2 x 2.5" SATA hard drive or SSD in a single optical 5.25" drive bay of your computer/workstation system. With the built-in hardware RAID 1 chipset and easy to read RAID status LED indicators, you can conveniently mirror the 2.5" drives for data redundancy without adding a RAID card or RAID monitoring software on the host end. In addition, Central Process Unit (CPU) is normally required to calculate a RAID but, alternatively, by having a RAID chipset on the enclosure, it frees up the CPU overhead and speeds up the whole system. Therefore MB902SPR-B is a perfect removable drive enclosure for mission-critical computer systems that not only make your system work faster but also provides protection against your critical data.
Built-In RAID 1 (Safe Mode)
With the built-in JMS562 hardware RAID chipset, you can create a 2.5" SSD/HDD RAID 1 array in any system without using a RAID controller card. The ToughArmor RAID MB902SRP-B automatically mirrors two 2.5" SATA HDD/SSD for data redundancy to prevent system downtime caused by a single hard drive failure.
Advanced RAID Status LED Indicators
The ToughArmor RAID MB902SPR-B is equipped with easy to read RAID status LED indicators for users to understand the current drive status without using a RAID monitoring software. However, if your application requires using a RAID monitoring software, it is available to download and install on Windows/Mac computers.
Removable Drive Trays
The MB902SPR-B features full metal removable EZ-Slide drive trays found throughout the ToughArmor Series, allowing users to install or remove 5-15mm height drives without opening the computer case or powering off the computer.
EMI Grounding
Making sure your drives are properly grounded is important, especially through many drive swaps. Without it, there is a high possibility that there may be static shocks that could damage your drives or may result in losing your important data. Our EMI grounding technology ensures a stable and safe environment for the HDD/SSD used, which improves reliability.
Safe and Secure
Ruggedized full metal chassis and trays ensure maximum drive security and further aids in drive heat dissipation. A built-in anti-vibration mechanism helps to reduce noise and protects against environmental damage.
Packed with Features
Large ventilation holes are placed around the enclosure to work alongside your computer's cooling system to keep the drives operating at optimal temperatures
The ToughArmor MB902SPR-B supports SATA 7 pin data and 15 pin power cables with locking latches, so you will never need to worry about the cables unintentionally disconnecting from the enclosure. Once the cables are connected, they will stay in place.
Learn More$191.64
