Information Technology

Features:

• Compact rack mountable 19" 1U high enclosure features 16-channels and is only 1.54" (40mm) deep
• Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTM for distances up to 1,500ft (460m)
• RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors (included)
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports "up-the coax" type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Limited lifetime warranty

The NVT Model NV-1613S is a compact 16-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) cable. Baseband (composite) signals of any type are supported.

"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of the Model NV-1613S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Learn More

NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT's popular NV-214A-M video transceiver with the added value of camera power connections. Power and Video are routed via UTP and RJ45 connections. Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT's PVD™ product line. Connect the RJ45 to 4-pair cable to be routed to the NVT Phybridge cable integrator and on to an active or passive receiver hub in the MDF/Control Room.

Learn More

Features:

• Compact rack mountable 19" 1U high enclosure features 32 channels and only 1.54" (40mm) deep
• Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTM for distances up to 1,500ft (460m)
• RJ45 video connectivity with optional NV-RJ45A RJ45-to-screw terminal adaptors (included)
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports "up-the coax" type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Limited lifetime warranty

The NVT Model NV-3213S is a compact 32-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of the Model NV-3213S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Learn More

The NVT Phybridge CLEER24-10G Layer 3 Enterprise Grade switch is designed to make IP/IoT deployments simple, secure, and cost-effective. The CLEER24-10G switch delivers up to 50 Watts of power (PoE++) and 10/100 Mbps symmetrical, full-duplex, over coax cabling with up to 6,000ft (1,830m) reach.

The CLEER24-10G switch enables Modern LAN principles and comes standard with 2 x SFP+ 10Gb/s uplink ports, dedicated management and console ports, 24 x 10/100 downlink ports, a 1,000 Watt hot-swappable power supply, power sharing, and power redundancy. The CLEER24-10G switch also comes with a new and intuitive GUI interface, ideal for any cloud or premise-based managed service offering. The new and improved CLI (Command Line Interface) is very similar to the Cisco offering for ease of use.

Benefits Include:

• Accelerate your return on investment by reducing infrastructure costs.
• Simplify your IP modernization, collapsing planning and deployment time.
• Eliminate infrastructure barriers, risks, disruption, and costs.
• Create a robust, secure IP platform that is easy to deploy and manage.
• Be environmentally responsible during your IP upgrades.

Speed, Reach and Power
CLEER24-10G switch delivers Fast Ethernet speeds and PoE++ (50W) over Coax with 6,000ft (1830m) reach. It is designed to support the most demanding IP endpoints with plenty of bandwidth to spare. The CLEER24-10G switch provides robust network performance at any distance.

Industry Leading PowerWISE® Technology
The NVT Phybridge CLEER24-10G switch is built with PowerWISE Technology, providing power sharing for redundancy, hot-swappable power supply, and auto-sensing 100-240 VAC delivering 1,000 Watts of power. The CLEER24-10G switch is one of the most energy efficient switches on the market, consuming 38 Watts of power to operate.

Learn More

The plug and play FLEX8 unmanaged switch makes the modernization to IP devices (IoT) simple, secure and cost-effective. When paired with the FLEX Adapters, this powerful enterprise-grade switch delivers fast Ethernet and PoE over Multi-Pair UTP with up to 2,000ft (610m) reach - that's 6Xs the reach of standard Ethernet switches.

With the FLEX8, customers are taking full advantage of Modern LAN principles, protecting existing infrastructure assets, and eliminating any need to rip and replace the established UTP cabling. The FLEX8 unmanaged switch optimizes network design with advanced interoperability and easy integration into the overall LAN creating a secure, robust path for IP endpoints.

• Accelerate your return on investment by reducing infrastructure costs.
• Simplify your IP modernization, collapsing planning and deployment time.
• Eliminate infrastructure barriers, risks, disruption and costs.
• Create a robust plug-and-play IP platform that is easy to deploy and manage.
• Be environmentally responsible during your IP upgrades.

Speed, Reach and Power
FLEX8 delivers 10/100Mbps symmetrical (full duplex) and PoE++ (50W) over 4-pair UTP or PoE+ (30W) over 2-pair UTP with 2,000ft (610m) reach, providing substantial power to support bandwidth demanding IP endpoints easily and reliably.

Simple Deployment
FLEX8 comes preconfigured and ready to deploy, making modernization to IP quick and efficient in organizations of every size. Modernizing multiple sites is greatly simplified with a repeatable, predictable and scalable deployment methodology across every location.

Learn More

Features:

• Provides Class 2 SELV 28 VAC with up to 1 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5 cable for each camera
• Built-in distribution amplifier with 2 video outputs per channel
• Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
• Adaptive StubEQTM fully automatic 2-band equalization provides adjustment free equalization every time, no manual adjustments required
• Automatic-reset fault protection; transient protection
• Individually floating power outputs and differential video inputs ensure total ground-loop immunity
• Diagnostic LEDs show load/no load, miswires, overload conditions, and video status
• Limited lifetime warranty

The 16-channel NV-16PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQTM Active Receiver Hubs have individual floating 28VAC outputs that support at-distance camera loads up to 1 Amp per channel for cable runs up to 1,500ft (460m). A built-in StubEQTM video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: automatic-reset fault protection, transient protection, ground loop free individually floating outputs and power and video diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVT's lifetime warranty.

Learn More

Features:

• Extended distance camera power and video routed through UTP and RJ45
• Supports 12VDC cameras with onboard regulated power
• Use with NVT's PVD™ Power Supply Hubs and Cable Integrators
• Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
• Up to 1,500ft (460m) with a NVT StubEQTM Hub
• Frequency response DC to 10MHz (see Recommended Distance Chart)
• Up to 750ft (225m) with NVT's Passive Receiver Hubs (see Power Distance Chart)
• Exceptional interference rejection
• Built-in transient protection
• Limited lifetime warranty

The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VACto-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and lowvoltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.

The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.

Learn More

Features:

• Compact rack mountable 19" 1U high enclosure features 8 channels and only 1.54" (40mm) deep
• Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTM for distances up to 1,500ft (460m)
• RJ45 video connectivity with optional NV-RJ45A RJ45-to-screw terminal adaptors included
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports "up-the coax" type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Limited lifetime warranty

The NVT Model NV-813S is a compact 8-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-813S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Learn More

The NVT Phybridge FLEX8 plug-and-play long reach PoE Switch is a versatile, high-powered, enterprise-class solution with 8 downlink ports delivering fast Ethernet (100Mbps full duplex, symmetrical) and PoE++ (50Wper port) over multi-pair UTP for up to 2,000ft (610m) - that's 6Xs the distance of typical PoE switches. The FLEX8 switch has two, 1Gb uplink ports for daisy chain deployments and comes standard with a 190W external power supply and a universal mounting kit for wall or rack mounting.

FLEX8 is designed to make the migration to IP quick, easy and cost-effective by leveraging 1-, 2- or 4-pair UTP infrastructure. FLEX8 is an enabler of Modern LAN principles and is IoTG certified. Benefits include:

• Accelerating your return on investment by reducing infrastructure costs.
• Collapsing planning and deployment time.
• Eliminating infrastructure barriers, risks, disruption and costs.
• Creating a robust IP platform that is easy to configure, deploy and manage.

Unlike other Network Switches, FLEX8 Delivers:

Speed, Reach and Power

The FLEX8 switch leverages new or existing 1-, 2- or 4-pair UTP cable. It can operate in standard mode (without an adapter) up to 328ft (100m), and in long reach PoE mode (with an adapter) for extended reach to 2,000ft (610m). The FLEX8 switch auto detects data rate for maximum bandwidth and transmission distance. It is equipped with a speed toggle which can be positioned to force 10Mbps when necessary to establishing a link.

Learn More