Audio Electronics
-
Vision CS-1900P Bluetooth Speaker System - 70 W RMS - White - In-ceiling - 80 Hz to 20 kHz
The CS-1900P are based on Vision's passive ceiling loudspeakers but have a powerful 70 watt amplifier built in. Easy to use and virtually invisible, these professional-grade loudspeakers are ideal for meeting spaces that can be divided, or at home.
Changing Room Layout?
For function centres which have meeting rooms that can be divided into smaller meeting rooms, a relay can switch between "standalone" mode, or "daisy-chain" mode.
Bluetooth
Easy to connect to. Bluetooth can be disabled via the remote control or RS-232.
Rename Bluetooth, Set Pin
Connect via USB and run software (see downloads tab) to rename and set the pin. The speakers stores the details for up to eight paired devices. Even if you change the PIN these eight devices will still connect without needing the new pin. When you pair a 9th device the 1st device will need to enter the password again to connect.
Auto-Switching
Choose to change to the Bluetooth input automatically when a device is paired, or manually switch.
Remote Control
An included IR remote control gives the user full control, including bass and treble adjustment.
IR Front and Rear
Switch between the front IR receiver, or the rear IR receiver if using a wired control system, or off.
Master/Slave
The amplifier is housed in the "master" loudspeaker which has the connection panel, and a speaker output connects to the included passive "slave" loudspeaker.
Daisy-Chain
If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1900P. In fact you can daisy-chain as many pairs as you need using this line-level audio output.
RS-232
For integration into a controlled audio-visual environment they can be controlled with RS-232 (serial) codes. Vision's Techconnect Control can be used to control them.
Memory
When power is turned on at the wall the CS-1900P automatically turn on and
resumes the previous input and volume setting.2-Way with Kevlar Driver
Two-way woofer and tweeter design with quality materials and a passive cross-over for superior audio.
Auto-Standby
If the amplifier senses no input for ten minutes it will automatically go into standby mode.
- Bluetooth device NOT PAIRED when it goes into standby: they will wake up when you pair a device or play audio though the line-level input.
- Bluetooth device PAIRED when it goes into standby: if the BT input was selected only the Bluetooth source will wake them up. If the line-level input was selected only a line-level input will wake them up.
Automatic standby can be disabled with the remote control.
Magnetic Grille
The bezel-less grille clips into place once the speakers are secured.
Simple to fit
A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 198 mm (7.8") hole and fit the speaker; it's quick and easy.
Learn More$193.63 -
Vision SP-1900P Bluetooth Speaker System - 30 W RMS - White - Wall Mountable - Bookshelf - 45 Hz to 20 kHz
Vision's professional 5.25" powered bookshelf speakers are purpose-built for any audio-visual presentation environments such as classrooms and meeting rooms, or bars and restaurants. They are simple to install and control. Perfect for meeting spaces or small rental applications.
Serial Control
RS-232 control allows this audio system to be controlled by a control system like Vision's own Techconnect Control. Tone and volume can be adjusted,. By default it switches to Bluetooth automatically when a device is paired, but this can be disabled with RS-232. Note: this product does not have a remote control.
Auto Standby
Auto-standby is on by default. It can be disabled via RS-232.
Bass Reflex
A bass reflex port allows greater excursion of the woofer, allowing the woofer to produce lower frequencies, and the phase-delayed movement of air from behind the woofer to the front reinforces the bass even more.
5.25" Woofer
These loudspeakers use a 5.25 inch woofer - the most popular size for classroom, meeting room, and boardroom applications. They are complemented with a 0.5" inch Mylar dome tweeter.
Horizontal C bracket
The adjustable brackets allow the installer to easily angle side to side, or up and down. Or leave the brackets off and use as shelf speakers.
Rugged Grille
Attractive and robust, the thick metal grille protects the drivers from physical interference.
Memory
When power is connected the SP-1900P automatically comes on and remembers the previous volume setting. Restoring power brings the loudspeakers back to life automatically.
Stereo Input
The 2-Phono (RCA) input makes it quick and easy to get up and running.
Bluetooth
Connect from your phone or tablet without missing a beat. By default the speakers auto-switch from the line-level input when Bluetooth is paired.
- A button on the rear turns BT off if you don't need it
- The PIN and Bluetooth name cannot be changed
The speakers have only one Bluetooth memory slot and will automatically connect to the most recent device. To unpair an unwanted device manually wait until that device is out of range then pair a new device. They can only pair to one device at a time.
Learn More$142.21 -
Vision SP-900P Speaker System - 30 W RMS - White - Wall Mountable - 50 Hz to 20 kHz
The SP-900P are Vision's most cost-effective audio solution. They are purpose-built for small meeting rooms and classrooms. Incredible value for money; they offer great sound quality and Vision's trademark ease of installation. Perfect for meeting spaces.
2-Way
A 5.25" woofer is complemented by a Mylar dome tweeter. The dome tweeter offers a wide dispersion so everyone in the room can hear at the same volume. This means loud and clear sound for meeting rooms and classrooms.
Volume Control
The volume dial is on the rear of the 'master' loudspeaker - the one containing the amplifier. It is alongside the hard power switch.
Wall Brackets
The brackets allow installers to easily tilt side to side, and the use of a dome tweeter means the speakers can be mounted on their sides allowing downward tilt. Alternately, leave the brackets off and use as shelf speakers.
Multiple Inputs
The rear panel of the master loudspeaker offers minijack and 2-phono (RCA) inputs.
ABS Chassis
Heavy-weight plastic material is used for the chassis, allowing a rigid acoustic chamber for distortion-free sound.
Bass Reflex
A bass reflex port allows greater excursion of the woofer, allowing the woofer to produce lower frequencies, and the phase-delayed movement of air from behind the woofer to the front reinforces the bass even more.
Inputs Summed
The inputs are combined at input stage meaning there is no input selection switch. Note: when both inputs are connected all source and display devices in the system should be powered from the same mains power source, otherwise earth hums will occur.
Learn More$112.96