Consumer Electronics

Cables To Go classroom speakers are specifically designed for use in K-12 classrooms to deliver high quality audio from multimedia presentations, video clips, movies and other curriculum throughout the classroom. This line of speakers is offered in both wall mount and ceiling mount configurations to meet the needs of different classroom designs. Available in industry standard 8 Ohm and 70 volt versions, these speakers ensure long life and quality sound. The Cables To Go Classroom Speakers integrate seamlessly with the TruLink Audio Amplifier to provide a complete classroom sound system. Additionally, the speakers can be combined with the TruLink A/V controller and RapidRun for a complete connected classroom.

Ceiling speakers mount easily for a clean, unobtrusive look while dispersing sound down to students at 125 degrees for full classroom coverage. Wall mount speakers work best in classrooms with sharp angles or room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.

This wall mount speaker is the perfect solution for K-12 classrooms, conference rooms or other learning, sharing and collaborating environments that require a sound reinforcement system for multimedia presentations, video clips, and movies. The wall mount configuration allows this speaker to be securely mounted to a wall or other flat surface. This speaker is built to an 8Ohm industry standard and integrates seamlessly with the TruLink Audio Amplifier to provide a complete sound system. Additionally, this speaker can be combined with the TruLink A/V controller and RapidRun for a complete connected A/V solution.

Wall mount speakers work best in rooms with sharp angles, room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. These speakers disperse sound at 120 degrees for full classroom coverage. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.

This wall mount speaker is the perfect solution for K-12 classrooms, conference rooms or other learning, sharing and collaborating environments that require a sound reinforcement system for multimedia presentations, video clips, and movies. The wall mount configuration allows this speaker to be securely mounted to a wall or other flat surface. This speaker is built to an 8Ohm industry standard and integrates seamlessly with the TruLink® Audio Amplifier to provide a complete sound system. Additionally, this speaker can be combined with the TruLink® A/V controller and RapidRun® for a complete connected A/V solution.

Wall mount speakers work best in rooms with sharp angles, room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. These speakers disperse sound at 120 degrees for full classroom coverage. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.

Cables To Go classroom speakers are specifically designed for use in K-12 classrooms to deliver high quality audio from multimedia presentations, video clips, movies and other curriculum throughout the classroom. This line of speakers is offered in both wall mount and ceiling mount configurations to meet the needs of different classroom designs. Available in industry standard 8 Ohm and 70 volt versions, these speakers ensure long life and quality sound. The Cables To Go Classroom Speakers integrate seamlessly with the TruLink Audio Amplifier to provide a complete classroom sound system. Additionally, the speakers can be combined with the TruLink A/V controller and RapidRun for a complete connected classroom.

Ceiling speakers mount easily for a clean, unobtrusive look while dispersing sound down to students at 125 degrees for full classroom coverage. Wall mount speakers work best in classrooms with sharp angles or room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.

This wall mount speaker is the perfect solution for K-12 classrooms, conference rooms or other learning, sharing and collaborating environments that require a sound reinforcement system for multimedia presentations, video clips, and movies. The wall mount configuration allows this speaker to be securely mounted to a wall or other flat surface. This speaker is built to a 70V industry standard and integrates seamlessly with distributed speaker systems, such as a public address (PA) system.

Wall mount speakers work best in rooms with sharp angles, room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. These speakers disperse sound at 120 degrees for full classroom coverage. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.

Note: This speaker is sold individually and not in pairs.

It's unfortunate but true - a lesson might be lost on students if they have trouble hearing the instructor. With the Trulink Audio Amplifier for classrooms students will remain attentive and better informed during class - no more disengaged learners. With maximum sound amplification, this cutting-edge system ensures consistent levels of audio through the classroom whether from the instructor, video or other multimedia source. Connects easily to classroom A/V equipment such as projectors, microphones, laptops or DVD players and ensures that each student has a quality learning experience. The Trulink Audio Amplifier is powerful enough to overcome background noise, poor room acoustics and even mild hearing loss in students.

Save money, time and space with our plenum-rated audio amplifier. Laboratory tested and verified, this unit can be installed directly in a plenum air space without enclosing it in a separate plenum-safe box. Its minimal size and weight allow for easy installation virtually anywhere.

Audio amplifiers are required in commercial and educational environments to boost line level audio from laptops, DVD players or other electronics to drive speakers that evenly disperse sound throughout the room. This plenum-rated 45 Watt stereo amplifier provides excellent performance and produces crisp, clear audio. Its unique heat-sink design provides effective heat dissipation which allows it to be used in areas of high temperature and low air flow such as plenum boxes. Integrated Hummbuster technology allows the amplifier to filter hums and ground loop issues that can compromise sound quality and have traditionally plagued audio systems. Power and performance combine in this device to ensure quality performance while staying on budget.

The 8 Ohm 50W Audio Amplifier is the ideal solution for supporting a sound reinforcement system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 8 Ohm design. This amplifier supports many advanced features which make it a perfect fit for most applications.

Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.

After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.

The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the TruLink® A/V Controller

This amplifier accepts a 3.5mm and RCA Stereo Audio input as well as a 3.5mm Microphone input. The mixing function ensures that audio from all three inputs are mixed and sent to the speaker outputs.

This amplifier is designed to accept either RS232 control or control signals from an industry standard volume control.

The PA sensor will automatically mute the audio inputs of the amplifier allowing the public address to be heard.