Rack Equipment

Rocstor's Premium 8U/12U/22U wall mount rack is a versatile and expandable solution for storing and supporting standard 19-inch rack equipment. It can be expanded to three sizes (8U, 12U, 22U), depending upon the number of mounting equipment, and allows for reserving space for future equipment. It provides an economical and cost-effective solution for mounting and organizing equipment.

The 2-post rack provides an organized and elevated solution for IT equipment including patch panels, switches, and network servers. It has an open-frame design for easy accessibility during configuration or troubleshooting, and improved air circulation to keep equipment cool. It can be used in server rooms, back offices or limited-space equipment rooms.

The wall mount bracket is made of heavy-duty CRS with a black-powder coat finish for durability and corrosion resistance. It has a maximum static load capacity of 150 lbs. (68Kgs) and is lightweight. The rack has numbered units (U) and square mounting holes for easy equipment installation with included hardware (cage nuts and screws). It is designed for smooth installation and arrives in a flat-pack for convenient transportation and reduced shipping costs.

This 8U/12U/22U wall mount rack is backed by Rocstor's 5-year warranty and lifetime phone support.

Rocstor's Premium 18U Rack Enclosure is designed to provide a secure and organized storage solution for your networking, A/V, and telecommunication equipment. With its sturdy construction and high static load capacity of 1760 lbs. (800Kgs), the cabinet provides ample storage space for heavy equipment and helps to maintain a clean and organized appearance in limited space rooms, such as network closets, back offices, or wire distribution closets.

Quick Equipment Setup and Mobility

This high-quality rack is shipped fully assembled for quick and hassle-free installation. The adjustable mounting depths of the rails, from as low as 6 inches to a maximum depth of 34.25 inches, provide sufficient space for cabling and power management, enabling you to keep your equipment organized and accessible. Furthermore, the pre-drilled coverable holes in the ceiling and base of the cabinet make it easy to run cables in and out of the cabinet in an organized and neat manner.

The rack features a 3-meter roll of hook-and-loop cable tie straps that can wrap and unwrap the cables and cords together for adjustments. It also gives you a storage surface of 1 Unit to store accessories like power strips, surge protectors, and other small items that need to be kept within reach but do not need to be mounted in the rack. Moreover, the grounding lugs of the rack allow you to ground the mounted equipment, providing an added layer of protection against power surges in power-dense areas like data centers. Rocstor also provides high-quality casters with the rack enclosure to move it across the office, allowing you to connect the mounted equipment with other devices conveniently. With a width of 600mm and depth of 1000mm, the rack can easily pass through standard 7 ft. (2.13 m) doorways.

The 18U rack is made up of heavy-duty cold-rolled steel (CRS) with black-textured powder coating for increased strength and durability in harsh environments. It is compatible with standard EIA-310-E 19-inch rack-mount equipment, including servers from major manufacturers such as HP®, Dell™, and Lenovo®. This rack is an excellent choice for those who need to move their equipment around regularly or need a flexible solution for their network setup.

Improved Security and Airflow

The premium 18U rack enclosure features side panels and mesh doors to enhance the security and protection of your equipment. The lockable front and back doors prevent unauthorized access to your valuable equipment, while the side panel provides easy access for maintenance and configuration. The mesh doors allow for excellent airflow to keep your equipment cool and prevent overheating. The mesh design also helps to prevent dust particles from entering the cabinet and affecting buttons and ports, which can impact the performance of your equipment.

This 18U floor-standing rack cabinet is backed by Rocstor's 5-year warranty and lifetime phone support.

Rocstor's Premium SolidRack 5U Low Profile Vertical Mount Switch-Depth Wall-Mount Rack Enclosure Cabinet is all you need to safely and securely house your 19-inch rack equipment including patch panels, network switches, batteries, and routers. It is a perfect solution for areas with limited floor space such as network wiring closets, server rooms, data centers, and back offices to keep your equipment organized and accessible for configuration or maintenance.

This Cold Rolled Steel (CRS) slim and sleek wall mount enclosure cabinet can mount devices up to 20-inches deep, despite its low-profile design, while extending less than 10-inches from the wall. In addition, apart from the main 5U mounting space, it also contains 2U mounting bracket located at the top of the enclosure that can be slid out to accommodate patch panels up to 2.5 inches deep. The enclosure safely conceals all the equipment stored inside with its secure top panel and front door to prevent damage or theft. With its vented design, it ensures proper airflow across the cabinet to maintain cool temperature and prevent devices from heating up and getting damaged. In addition, you can also install Rocstor's high-quality fan set (including two pre-assembled fans) in the rack's ceiling to enhance the cooling performance inside wall cabinet. This enclosure cabinet features reversible front door which can be opened from either left or right side to provide greater flexibility for installation and accessibility. With top and bottom ports, the cables can be routed easily and strain-free.

This sturdy Cold Rolled Steel (CRS) wall mount enclosure is made of heavy-duty steel with black-powder coat finishing to make it corrosion-resistant and durable in harsh environments. It supports maximum static load capacity of 150 lbs and is shipped fully assembled to be easily installed on the wall in no time. The premium SolidRack 5U Low Profile Vertical Mount Switch-Depth Wall-Mount Rack Enclosure Cabinet is backed by Rocstor's 5-year warranty and lifetime phone support.

Attributes

• 5U Low Profile Vertical Mount Switch-Depth Wall-Mount Rack Enclosure Cabinet
• Durability and longevity
• 150 lbs. static weight capacity
• Slim and sleek design
• Cold Rolled Steel (CRS)
• Black finishing
• 5-year warranty

Rocstor's Premium 1U Universal Adjustable Vented Sliding Steel Shelf provides you a versatile and practical solution for installing and accessing the non-rack mountable peripherals and equipment in standard 19" server racks and network cabinets. Made of heavy duty cold-rolled steel, this exquisitely designed 1U rack shelf provides robust support for your equipment with maximum weight capacity of 132lbs. (59.6kg).

The 1U sliding steel shelf is supported by two locking adjustable rails allowing easy installation of the shelf into the rack with adjustable mounting depth ranging from 25.6in to 40in.What sets this rack shelf apart is its locking feature.When in use, the shelf can be securely locked at the three-quarter point, ensuring that it stays in place and prevents accidental sliding or falling out of the rack, especially during maintenance tasks. Moreover, the vented design of the shelf promotes optimal airflow and ventilation, preventing overheating and ensuring the proper functioning of your equipment

This server rack shelf can easily be installed into the rack cabinet using the included M6 cage nuts and screws. The premium 1U Universal Adjustable Vented Sliding Steel Shelf is backed by Rocstor's lifetime warranty and phone support.

Attributes

• 1U Universal Adjustable Vented Sliding Steel Shelf
• Durability and longevity
• 132 lbs. (59.6kg) weight capacity
• Black Sliding Steel Shelf
• Lifetime warranty

The Rocstor SolidRack R3105 45U Rack Enclosure Cabinet is built for modern data centers, offering a robust static load capacity of 3300lbs (1500kg) or 2314lbs (1049kg) of rolling capacity. The R3105 ships fully assembled and includes doors and side panels. Made from durable cold-rolled steel (CRS), it features keyed door locks. With its extensive ventilation and cable management capabilities, it ensures optimal airflow and organization, making it perfect for hot-aisle/cold-aisle configurations. The SolidRack features front and rear pairs of vertical rails with square mounting holes, adjustable from 5.67 inches (144 mm) to 35.24 inches (894 mm) when the cable manager bar is not installed. With the cable manager bar in place, the adjustable range for the vertical rails is from 5.67 inches (144 mm) to 30 inches (762 mm). It also includes adjustable vertical mounting rails for easy installation of PDUs and cable managers.

Safety and convenience are key aspects of the SolidRack R3105. It has locking, reversible, and removable front and rear doors, along with removable side panels for maximum security and ease of maintenance. The split rear door design allows for closer placement to walls, saving space. The vented top panel and open bottom facilitate efficient cooling and cable access, while preinstalled casters and levelers ensure easy mobility and stable positioning.

Deploying the SolidRack R3105 is straightforward with its preinstalled casters and levelers. This rack enclosure is compatible with a wide range of accessories, allowing for customized solutions to meet specific needs. It comes with a Rocstor 5-year warranty and free technical support, providing peace of mind and reliable performance.