Faceplates & Mounting Boxes
-
Tripp Lite HDMI Over Cat5/Cat6 Active Video Extender Remote Receiver Wallplate 1080p 200' - White - 1 x HDMI Port(s) - 1 x RJ-45 Port(s) - TAA Compliant
The B126-1A0-WP-1 is a receiver unit that is used with the B126-002 and B126-004 transmitter units. It extends a 1080p (60Hz) signal to a monitor up to 150 ft. away using Cat5e/6 cable. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable. (Tripp Lite's N202-Series) It features a built-in Equalization control for adjustment of the video image, and RJ45 jacks for easy connection with Cat5e/6 patch cable. Supports 24-bit True Color (8-bits per channel), HDCP, 3D, and both stereo audio and 7.1 channel surround sound audio (7.1 channel surround sound signal will be Multi-Channel or PCM).
Installation is simple. Connect the transmitter unit to an HDMI source using a Tripp Lite P568-Series HDMI cable (not included). Connect the receiver unit to a display using a Tripp Lite P568-Series HDMI cable (not included). Finally, connect the receiver to the RJ45 port on the transmitter using a single Cat5e/6 cable. The B126-1A0-WP-1 is TAA GSA Compliant.
Learn More$131.83 -
Tripp Lite DVI over Cat5/Cat6 Active Video Extender Wallplate Kit 1920 x 1080 - White - 2 x RJ-45 Port(s) - TAA Compliant
Tripp Lite's B140-1A1-WP DVI over Cat5 Active Extender Kit is perfect for those who need a wallplate solution that extends a DVI-D Single-Link signal up to 200 ft. from the source. When using 24Awg, solid wire Cat5e/6 cabling (Tripp Lite N202-Series patch Cables), the B140-1A1-WP can extend a 1024 x 768 (60Hz) signal up to 200 ft., or a 1920 x 1080 (60Hz) signal up to 150 ft. Installation is quick and easy: Simply plug a pre-terminated RJ45 patch cable between the two wallplates and connect the wallplates to the source and monitor using standard DVI-D Single-Link cables (Tripp Lite P561-Series). The signal will be sent with perfect video quality with equalization control at the receiver end, which allows adjustment for the sharpest image. Wallplates mount in standard in-wall electrical boxes or surface mount boxes. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Learn More$126.88 -
Kramer Active Wall Plate Computer Graphics Video Transmitter - 1-gang - 1 x RJ-45 Port(s) - 1 x VGA Port(s)
The WP-110 is a twisted pair wall plate transmitter for computer graphics video signals with resolutions up to and exceeding UXGA. It converts a computer graphics video signal into a twisted pair signal that the TP-120 twisted pair receiver (or other compatible Kramer receiver) converts back into a computer graphic signal.
Learn More$173.88 -
Kramer Active Wall Plate HDMI Over Twisted Pair Receiver - 1-gang - 1 x HDMI Port(s) - 1 x RJ-45 Port(s)
The WP-572 is a DGKat™ twisted pair receiver for HDMI signals. The WP-571 converts an HDMI signal to a single twisted pair signal and the WP-572 converts the twisted pair signal back to an HDMI signal.
Learn More$180.88 -
Kramer RC-2 Faceplate - 1-gang
The RC-2 is a 2-button controller that sends a series of RS-232 commands with the push of a button. It operates serial devices such as projectors, displays & switchers.
Learn More$159.88 -
Kramer RTBUS-11 Round Table Mount Multi-Connection Solution - Pneumatic Lid - 1 x HDMI Port(s) - 1 x Mini-phone Port(s) - 1 x RJ-45 Port(s) - 1 x VGA Port(s)
The RTBUS-11 is a round, furniture-mounted, connection bus that is easily installed in a table or podium top. The unit connects AV equipment to the room's presentation system.
- 4 Inputs - 15-pin HD, HDMI, 3.5mm, & RJ-45.
- Power Input - 110V AC (USA only).
- Cover - Pneumatic pop-up lid.
- Cutout Size (Mount Dimension) - 92 to 95mm diameter.
$193.04