Cable Management

The Crestron®FT2-202-MECH-PTLFlipTop™ cable management system installs into a table or other horizontal surface to provide modular connectivity. It features a retracting lid that disappears within the enclosure. When the lid is retracted, six module slots are arranged in one row. The flexible modular design may also be customized with an assortment of Crestron accessories, and the pass-through lid style allows cables to be fully extended while the lid is closed.

The precision fit design affords a clean appearance with machined metal surfaces finished in a choice of black or alloy. Modular accessories enable custom configuration and quick installation. All connections reside at the top surface, clearly visible and readily accessible.

Crestron® Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with CrestronFT2 Series FlipTop™cable management systems. Each cable pulls out smoothly to any length up to 34 inches (86 cm) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop™ allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical enclosure beneath the table.

Each Gravity Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A 4 foot long cable tail is provided below the table for connection to a DM® transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use. Each module is labeled with an international symbol icon indicating the connection type, which is backlit when installed in an "Electrical" FT2 FlipTop. When installed in a "Mechanical" FlipTop, the symbol icon remains legible but is not backlit.

The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding anFT2A-CBLR-BRKT seriesmid-row adapter bracket (one per row, each sold separately). Installation requires 28-7/16 inches (722 mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 2-3/8 inches (60 mm) horizontal clearance to either side of the chassis, while mid-row retractors require 2-3/4 inches (70 mm) horizontal clearance to the front or rear of the chassis.

Several models of gravity cable retractors are offered. The following "4K" models feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.

• HDMI® to HDMI -Model FT2A-CBLR-GR-4K-HD provides a retractable High-Speed HDMI® cable with a male HDMI Type A connector at both ends.
• DisplayPort™ to DisplayPort -Model FT2A-CBLR-GR-4K-DP provides a retractable DisplayPort cable with a male DisplayPort connector at both ends.
• DisplayPort to HDMI -Model FT2A-CBLR-GR-4K-DP-HD provides a retractable cable with a male DisplayPort connector at the source end above the table and a male HDMI Type A connector at the sink end below the table; converts DisplayPort to HDMI to allow connection of a DisplayPort source to an HDMI input.

The Crestron®FT2-700-MECH-PTLFlipTop™ cable management system installs into a table or other horizontal surface to provide modular connectivity. It features a retracting lid that disappears within the enclosure. When the lid is retracted, 12 module slots are arranged in two rows of six. The flexible modular design may also be customized with an assortment of Crestron accessories, and the pass-through lid style allows cables to be fully extended while the lid is closed.

The precision fit design affords a clean appearance with machined metal surfaces finished in a choice of black or alloy. Modular accessories enable custom configuration and quick installation. All connections reside at the top surface, clearly visible and readily accessible.

For more information about the accessories, please visitwww.crestron.com/Crestron-FlipTops. To configure your FlipTop, launch theFlipTop Configuration Tool.

Quick and Simple Tabletop Installation

Mounting the FlipTop is as simple as cutting the hole, placing the unit, and turning four screws to engage the swiveling dogs that secure the FlipTop in place. Drop-in modules and under table accessories can then be installed. To complete the installation, the top cover bezel snaps into place magnetically.

The FT2-700-MECH-PTL offers a perfect upgrade to older Crestron FlipTop systems and similar third-party products. Using the easy-to-installFT2A-SPCR-MNT-10mounting spacers (sold separately), the FT2-700-MECH-PTL easily replaces a CrestronFT-600series FlipTop or Extron® Cable Cubby® 700 Cable Access Enclosure without any additional cutting required. A mounting surface up to 1 3/4 in. (44 mm) thick is allowed.

See also theFT2-700-ELEC-PTLFlipTop system for alternate FT2 FlipTop models with advanced features and options.

Modular Design

The FT2-700-MECH-PTL delivers a customizable connectivity solution with easy-to-install accessories such as pull out cables, flush mount connectors, and AC power outlets. The final installation provides one smooth, contiguous surface with no visible gaps or screws, and the modules may be rearranged at any time.

The Crestron®FT2-700-MECH-PTLFlipTop™ cable management system installs into a table or other horizontal surface to provide modular connectivity. It features a retracting lid that disappears within the enclosure. When the lid is retracted, 12 module slots are arranged in two rows of six. The flexible modular design may also be customized with an assortment of Crestron accessories, and the pass-through lid style allows cables to be fully extended while the lid is closed.

The precision fit design affords a clean appearance with machined metal surfaces finished in a choice of black or alloy. Modular accessories enable custom configuration and quick installation. All connections reside at the top surface, clearly visible and readily accessible.¹

For more information about the accessories, please visitwww.crestron.com/Crestron-FlipTops. To configure your FlipTop, launch theFlipTop Configuration Tool.

Quick and Simple Tabletop Installation

Mounting the FlipTop is as simple as cutting the hole, placing the unit, and turning four screws to engage the swiveling dogs that secure the FlipTop in place. Drop-in modules and under table accessories can then be installed. To complete the installation, the top cover bezel snaps into place magnetically.

The FT2-700-MECH-PTL offers a perfect upgrade to older Crestron FlipTop systems and similar third-party products. Using the easy-to-installFT2A-SPCR-MNT-10mounting spacers (sold separately), the FT2-700-MECH-PTL easily replaces a CrestronFT-600series FlipTop or Extron® Cable Cubby® 700 Cable Access Enclosure without any additional cutting required. A mounting surface up to 1 3/4 in. (44 mm) thick is allowed.

See also theFT2-700-ELEC-PTLFlipTop system for alternate FT2 FlipTop models with advanced features and options.

Modular Design

The FT2-700-MECH-PTL delivers a customizable connectivity solution with easy-to-install accessories such as pull out cables, flush mount connectors, and AC power outlets. The final installation provides one smooth, contiguous surface with no visible gaps or screws, and the modules may be rearranged at any time.