Rack & Cabling

Arc Buffer Bracket Helps You Create Custom Cable Management Schemes

This SmartRack® arc buffer creates a secure connection point between two intersecting sections of wire mesh cable tray in your server room or data center. This allows you to create a radius for 90-degree intersections and shape the direction of cabling to your liking. The black powder-coated metal plate adds a radius that further strengthens and supports the bundled cables, allowing for more voluminous and comprehensive runs. Four couplers are included for quick installation. The SRWBARCBFFL4 is designed for wire mesh cable trays four inches in height, such as Tripp Lite's SRWB6410STR, SRWB12410STR and SRWB18410STR.

Typical Applications

• Organize a wire mesh cable tray system with intersecting sections along the wall, floor or ceiling of your data center

Versatile Axis Coupler Helps You Create Custom Cable Management Schemes

The SmartRack® SRWBAXISCPLR is a black powder-coated metal axis coupler that comes with an M6 flange nut and M6 x 20 carriage bolt for easy installation with your wire mesh cable tray. Not only is it the ideal coupler for creating angles in your cable tray connections, allowing you to aim your cable routing in any direction you like, it also helps you secure the cable tray to the ceiling of your server room or data center (with the use of an M6 threaded rod, not included).

Typical Applications

• Organize a wire mesh cable tray system with intersecting sections along the wall or floor of your network closet
• Suspend a wire mesh cable tray system from the ceiling of your data cente

Ensures a Proper Bend Radius to Reduce Cable Stress and Keep Your Cable Tray Organized

This SmartRack® exit clip helps reduce bend-induced stress, pinching, pressure points and fatigue in your wire mesh cable tray system. It mounts to the cross member of the tray to route copper cables down through an opening in the wire. The SRWBDROP is 45 millimeters wide and snaps to the wires with no hardware needed. You can also snap adjacent exit clips into the tray to expand the width of your bundled cable drop.

Typical Applications

• Bundle network or other copper cables along the wall, floor or ceiling of your data center
• Reduce stress, pinching, pressure points and fatigue while dropping cables through the bottom of the wire mesh cable tray

System Requirements

SRWB coupling accessory

High-Resiliency Strengthening Bar Helps You Create Custom Cable Management Schemes

The SmartRack® SRWBHDCPLR includes a black powder-coated metal strengthening bar and three couplers, each with an M6 flange nut and M6 x 20 carriage bolt for easy installation with your wire mesh cable tray. This kit allows you to connect two straight sections of cable tray to extend your cable management application along the wall, floor or ceiling of your data center, network closet or industrial space. It is also ideal for creating reductions. The SRWBHDCPLR is compatible with 6-, 12- and 18-inch wire mesh cable trays. For best practice, connecting the tray sections at the bottom with an extra coupler (sold separately) is recommended.

Typical Applications

• Extend a wire mesh cable tray system along the wall, floor or ceiling of your data center
• Strengthen your wire mesh cable tray to provide stability for your cable bundle

System Requirements

SRWB sectional pieces

Rugged 5U Enclosure Ideal for Housing Regular Rack and Non-Rack Network Equipment

This heavy-duty steel enclosure secures and houses both regular rack equipment and other equipment not typically mounted in an EIA-standard 19-inch rack. It is recommended for wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need audio/video, voice and data infrastructure to be secure, organized and out of the way. Constructed with a durable black powder-coated finish, the vertical equipment rack has a maximum load capacity of 150 pounds.

Connect a Modem, Router and Other Non-Rack Equipment Inside the Enclosure

Two pre-installed, but removable, 1U shelves with adjustable metal equipment brackets attach to the cabinet's square mounting holes. Just place your modem, router, firewall, switch, power block or other non-rack equipment on the brackets, and use the included thumbscrew to secure them to the rack. Four RJ45 jacks are built into the rack cabinet for connecting your devices to a network.

Low-Profile Design Accommodates Switches, Panels and Other Standard Rack Equipment

Remove the two shelves to reveal two 5U areas for rack-mount equipment, one above the other, forming a total mounting space of 10U. The enclosure extends less than seven inches from the wall, while housing equipment up to 16.5 inches deep, including network switches and patch panels.

Keeps Important Equipment Secure and Easy to Access

The reversible front door locks securely with a built-in combination lock to help prevent damage, tampering or theft. The vented cabinet allows air to flow freely and keep equipment cool. Brush-strip cable plates on both sides allow easy cable routing while preventing dust from entering.

Easy Enclosure Deployment and Equipment Installation

The structured wiring cabinet comes fully assembled and ready to mount to the wall. The equipment brackets adjust easily and allow for flexibility in storing routers and other devices.

Meets Payment Card Industry Standards

The SRWF10UMOD provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance. This is essential for companies that process, store and/or transmit credit card information.

More from the Manufacturer