Rack & Cabling
-
Eaton Tripp Lite Series Cable Assembly Kit - Water Resistant, IP68, Outdoor Cable, TAA - Black - TAA Compliant
Cable Assembly Kit Recommended for Outdoor or Harsh Indoor Environments
This rugged water-resistant kit lets you create custom patch cable connections for Gigabit Ethernet networks or digital signage in outdoor applications and other areas where protection from harsh elements is essential. It slides over an industrial-grade Ethernet cable and fastens securely to the bulkhead coupler or keystone jack to keep water and debris out.
IP68 Rating Denotes Resistance to Dust and Water
The IP68 rating means the cable assembly kit is not only 100% protected against dust, but also able to endure immersion in 1.5 meters of water for up to 60 minutes with no damage or decline in performance, making the kit ideal for basement applications. For applications that require IP68 protection, use the kit with a Tripp Lite N206-SB01-IND surface-mount box, N206-Series Cat6 cable, and the N206-BC01-IND bulkhead coupler or N206-KJ01-IND keystone jack. If only IP44 protection against splashing water from all directions is required, pair the kit with the above Cat6 cable, the coupler or keystone jack, and an N206-FP01-IND, N206-FP02-IND or N206-FP04-IND metal wall plate (all sold separately).
TAA-Compliant for GSA Schedule Purchases
The N206-WK01-IND is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Lifetime Warranty
The N206-WK01-IND is backed by a lifetime warranty, ensuring reliability and performance.
Learn More -
Eaton Tripp Lite Series Cat6 Straight Through Modular Shielded In-line Snap-in Coupler (RJ45 F/F), TAA - Silver - Gold - TAA Compliant
Use Tripp Lite's Category 6 Straight Through Shielded Coupler to extend the length of Cat6 Shielded patch cords, or use in standard data wallplates to provide feed-through patching. Keystone design allows the coupler to be used as a stand-alone unit, mounted in a faceplate, or blank keystone type patch panel. Meets EIA/TIA Cat6 specifications.
Learn More -
Eaton Tripp Lite Series 12-Port Cat6/Cat5 Wall-Mount Vertical 110 Patch Panel, TAA - 12 x RJ-45
Tripp Lite's Cat6 wall-mount patch panel guarantees compatibility with all networks. Color coded for both EIA/TIA 568a & 568b installations. Panel comes with 110-type termination blocks. This 12" panel effortlessly mounts to a wall or desk with two "C" brackets. Mounting bracket is provided.
Learn More$100.00 -
Eaton Tripp Lite Series 12-Port Cat6a Wall-Mount Patch Panel - PoE+ Compliant, 110, 568A/B, RJ45 Ethernet, Offset Ports, TAA - 12 Port(s) - Category 6a - Twisted Pair - Black - Wall Mountable, Desktop, Surface-mountable - TAA Compliant
12-Port Patch Panel Manages and Organizes Cat6a Network Cabling
This patch panel enables quick, easy cable patching. Just plug Cat6a patch cables into its 12 front RJ45 ports, and use a 110 punch-down tool to terminate color-coded connections in the rear. Both the offset RJ45 ports and 110 terminals are clearly numbered, and the front ports have blank labels to help you identify individual cable runs. The N250-012-6A-OF supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications.
Specifically Designed for Use in Power over Ethernet Plus (PoE+) Applications
This Power over Ethernet patch panel maximizes performance with Type 2 PoE+ applications. It prevents spark-gap erosion that degrades the plug and jack contacts over time and can affect data and/or power transmission capabilities. The N250-012-6A-OF is designed to handle the frequent mating and unmating of surveillance cameras, VoIP phone systems, wireless access points and other PoE and PoE+ devices under electrical load.
Effortlessly Mounts to a Wall Using the Included Frame
The 12-port patch panel mounts to a wall, desk or similar flat surface in either horizontal or vertical mode, so you can easily organize inputs to your specific requirements. The patch panel easily snaps into and out of the frame, allowing you to remove it to make new 110 connections and snap it back into place. Included cable ties help organize your connections and cut down on cord clutter.
TAA-Compliant for GSA Schedule Purchases
The N250-012-6A-OF is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Learn More$193.10 -
Eaton Tripp Lite Series 24-Port Cat6/Cat5 Low Profile Feed-Through Patch Panel, 1U Rack-Mount/Wall-Mount, TAA - 24 x RJ-45
Tripp Lites N250-024-LP, Cat6 Feed-Through Low Profile patch panel, makes cable patching quick and easy, by simply plugging Cat6 patch cables into either side of the Cat6 couplers. Ninety degree angles on the couplers allows for low profile mounting to a wall with included stand-off brackets. Cables feed into the front of the panel, and corresponding patch cables exit Up, Down, Left, or Right, depending on the mounting position. Patented printed circuit board design within the coupler exceeds NEXT requirements for Cat6 component testing, assuring Gigabit+ speeds.
Learn More$670.34 -
Eaton Tripp Lite Series Cat6 Wall-Mount 12-Port Patch Panel - PoE+ Compliant, 110/Krone, 568A/B, RJ45 Ethernet, TAA - 12 Port(s) - 12 x RJ-45 - Black - Wall Mountable - TAA Compliant
12-Port Patch Panel Manages and Organizes High-Density Cat6 Network Cabling
This patch panel enables quick, easy cable patching. Just plug Cat6 patch cables into its 12 front RJ45 ports, and use a 110 or Krone punch-down tool (do not use a 4/5 pair 110 punch-down tool) to terminate color-coded connections in the rear. Both the RJ45 ports and 110 terminals are clearly numbered, and the front ports have blank labels to help you identify individual cable runs. The N250-P12 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications.
Specifically Designed for Use in Power over Ethernet Plus (PoE+) Applications
This Power over Ethernet patch panel maximizes performance with PoE+ applications. It prevents spark-gap erosion that degrades the plug and jack contacts over time and can affect data and/or power transmission capabilities. The N250-P12 is designed to handle the frequent mating and unmating of surveillance cameras, VoIP phone systems, wireless access points and other PoE and PoE+ devices under electrical load.
Effortlessly Mounts to a Wall or Desk Using the Included Frame
The 12-port patch panel is constructed from aluminum with an ABS plastic frame that mounts to a wall, desk or similar flat surface. The patch panel easily snaps into and out of the frame, allowing you to remove it to make new connections and snap it back into place. Included cable ties help organize your connections and cut down on cord clutter.
TAA-Compliant for GSA Schedule Purchases
The N250-P12 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Lifetime Warranty
The N250-P12 is backed by a lifetime warranty, ensuring reliability and performance.
Typical Applications
- Patch cables to PoE+ devices mounted in areas that are difficult to reach or have no electrical outlets
- Add routers, switches, wireless access points, security cameras, sensors and other PoE+ devices to an Ethernet network configuration
$117.66
