Rack & Cabling
-
Crestron FlipTop FT2 FT2-700-MECH-PTL-B Cable Organizer - Pass-Through Lid - Black - Metal
The Crestron®FT2-700-MECH-PTLFlipTop™ cable management system installs into a table or other horizontal surface to provide modular connectivity. It features a retracting lid that disappears within the enclosure. When the lid is retracted, 12 module slots are arranged in two rows of six. The flexible modular design may also be customized with an assortment of Crestron accessories, and the pass-through lid style allows cables to be fully extended while the lid is closed.
The precision fit design affords a clean appearance with machined metal surfaces finished in a choice of black or alloy. Modular accessories enable custom configuration and quick installation. All connections reside at the top surface, clearly visible and readily accessible.1
For more information about the accessories, please visitwww.crestron.com/Crestron-FlipTops. To configure your FlipTop, launch theFlipTop Configuration Tool.
Quick and Simple Tabletop Installation
Mounting the FlipTop is as simple as cutting the hole, placing the unit, and turning four screws to engage the swiveling dogs that secure the FlipTop in place. Drop-in modules and under table accessories can then be installed. To complete the installation, the top cover bezel snaps into place magnetically.
The FT2-700-MECH-PTL offers a perfect upgrade to older Crestron FlipTop systems and similar third-party products. Using the easy-to-installFT2A-SPCR-MNT-10mounting spacers (sold separately), the FT2-700-MECH-PTL easily replaces a CrestronFT-600series FlipTop or Extron® Cable Cubby® 700 Cable Access Enclosure without any additional cutting required. A mounting surface up to 1 3/4 in. (44 mm) thick is allowed.
See also theFT2-700-ELEC-PTLFlipTop system for alternate FT2 FlipTop models with advanced features and options.
Modular Design
The FT2-700-MECH-PTL delivers a customizable connectivity solution with easy-to-install accessories such as pull out cables, flush mount connectors, and AC power outlets. The final installation provides one smooth, contiguous surface with no visible gaps or screws, and the modules may be rearranged at any time.
Learn More$650.00 -
Crestron Keystone Plate Modules for FT2 Series, Qty. 10 - 1 x Total Number of Socket(s) - Flush Mount - 1 x RJ-45 Port(s) - 10
Provides a quantity of ten keystone plate modules for use with Crestron®FT2 Series FlipTops™to accommodate standard flush-mount keystone connectors such as the Crestron DigitalMedia™ Ultra Keystone RJ45 Jack (modelDM-CONN-ULTRA-RECP-20, sold separately). The keystone module format is a universal standard that allows manufactures to produce all types of low-voltage connectors that simply snap into a keystone opening. FT2A-PLT-KEY-10 keystone plates allow a wide variety of connector types to be installed within an FT2 series FlipTop™.
Each keystone plate occupies a single module space within the FlipTop chassis.
Key Features
- Provides a versatile connector solution for FT2 series FlipTops™
- Accommodates any flush-mount keystone connector
- Compatible with Crestron DM® Ultra keystone RJ45 jacks
- Simple drop-in modular design
- Occupies a single module space within the FlipTop™
- Sold in packs of ten
-
Crestron FlipTop FT2 Cable Organizer - Cable Pass-through Plate Module - 10 Pack
The FT2A-PLT-PT-10 cable pass-through plate modules for Crestron® FlipTop™ FT2 Series Cable Management Systems accommodate Crestron FT2A-CBL-PT Series Pass-Through Cables and various other interface cables. Cable pass-through plates allow interface cables to be easily pulled out for use, and then dropped back into the FlipTop assembly when done. When stowed in the FlipTop assembly, the cable simply drops beneath the table while the connector remains neatly nested in the pass-through plate.
Each cable pass-through plate occupies a single module slot within the FlipTop chassis and provides three height settings to accommodate cables with various sized connectors. The maximum allowable cable diameter is 0.45 in. (11.4 mm). FT2A-PLT-PT-10 is sold in packs of ten.
Key Features
- Convenient and cost-effective cable management for FlipTop assemblies
- Accommodates a variety of cable and connector shapes and sizes
- Designed for use with Crestron FT2A-CBL-PT Series Pass-Through Cables
- Provides three connector height adjustment settings
- Connectors sit neatly nested, clearly visible and ready for use
- Low-friction grommet affords easy cable pull-out and return
- Simple drop-in modular design
- Occupies a single module space within the assembly
- Sold in packs of ten
