PC Fans/Heat Sinks

Ideal for Small Spaces

Unlike standard 140 mm case fans with a thickness of 27 mm, the P14 Slim PWM PST has a mounting depth of only 16 mm. This makes it the ideal choice for Small Form Factor (SFF) builds. Corresponding screws for mounting on a radiator are already included.

Optimised for High Static Pressure

Because the fan design of the P14 Slim PWM PST is optimised for focused airflow, it generates high static pressure. The fan enables extremely efficient cooling and good airflow - even with increased air resistance. This makes the P14 Slim PWM PST particularly well-suited for use on concealed case intakes, dust filters, radiators, and generally in small cases that have little space for free airflow due to compactly placed hardware.

Maximum Quietness, Minimum Vibration

The operating noise of the newly-developed ARCTIC motor is barely perceptible, even at the lowest speed. Thanks to its special magnetization, the motor of the P-fans generates no start-up jerks and only a fraction of the commutation vibrations of a conventional DC motor. As a result, there is far less vibration on the housing at different speeds and no need for rubber buffering or additional decoupling.

Improved Service Life

The new ARCTIC motor generates significantly less frictional heat than its predecessors and current competitor models. As a result, coil temperature is reduced by up to 20 degrees, quadrupling service life, while reduced frictional losses ensure more efficient operation.

150 to 1800 rpm Controlled via PWM PST

With a wide speed range and innovative PWM Sharing Technology (PST), the P14 Slim PWM PST's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series.

High-Quality Sleeve Bearing

Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimized and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also reduced to a minimum. Less heat is developed, less bearing noise is generated and the life of the fan is extended significantly.

0dB Mode - Zero rpm

The speed of the P14 Slim PWM PST can be throttled down to a standstill via PWM. This allows efficient and silent PC operation in idle while guaranteeing maximum performance on demand.

Versatile Use

The P14 Slim PWM PST allows customisable installation in the case. It can both suck in cool air as an Intake fan and push out warm air as an Exhaust fan. The fan also offers both push and pull installation options on the radiator.

Learn More

Powerful Cooling

The P8 Max is a powerful fan with 500 to 5000 rpm.The fan delivers a static pressure of 5.3 mmH2O and generates an airflow of up to 40 cfm. It offers precise control of the fan speed via pulse width modulation (PWM) and is extremely efficient at 0.19 A. The P8 Max is ideal for 2U server racks, which often require a high airflow to effectively dissipate heat. In addition, it has a 0 dB mode for silent operation in IDLE.

Extremely Wide Speed Range

The P8 Max enables precise fan speed (500 to 5000 rpm) via pulse width modulation control, which can be adapted to the individual cooling requirements. The P8 Max enables silent operation when only a low airflow is required and provides a high performance level if needed.

Low Power Consumption

The P8 Max is distinguished by its extremely high efficiency. At a speed of 3000 rpm and a voltage of 12 volts, it requires only 0.669 watts, which corresponds to a current of 0.06 amps.

Optimised for High Static Pressure

The P8 Max delivers a focused airflow and guarantees a good airflow even with particularly high static pressure. Therefore, the P8 Max is also specially suitable for use on heat sinks, radiators, pinholes and filters.

0 dB Mode - Zero rpm

The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. This enables the P8 Max to be extremely flexible in adjusting the speed to optimally regulate the airflow for every case.

Virtually Silent due Fluid Dynamic Bearing

As a special feature, the P8 Max is equipped with ARCTIC's proven Hydrodynamic Bearing. This enables the virtually silent operation at low speeds that customers have been asking for. At maximum speed, brute performance is still guaranteed. Although these bearings tend to wear out, ARCTIC does not compromise on durability and still offers the 6-year warranty.

Quality You Can Rely On

To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a six years manufacturer's guarantee on the P8 Max.

Learn More

EXCELLENT PRICE-PERFORMANCE RATIO

With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions.

NEW P-FANS FOR INCREASED PERFORMANCE

The Freezer 34 eSports DUO benefits of all advantages of our new BioniX P-fans.

• High static pressure for increased cooling performance
• Extended RPM range
• Lower power consumption
• Fewer vibrations
• Extended life span
• High quality bearing
• PWM PST for synchronous fan control

Learn More

• Compatible with Intel ® & AMD ® sockets
• Thermal coating and evenly spread heat pipes for optimal heat dissipation
• Push-Pull-Configuration for ideal airflow
• Broad RPM Range for highest performance and low noise level
• Focused airstream for improved cooling performance
• 0 dB mode: silent passive mode when PWM signal is below 5 %
• PWM Sharing Technology (PST) regulates fan speed synchronously
• Extended life span and less vibrations with new motor technology
• Secure hold with backplate
• MX-4 thermal paste included

The ARCTIC Freezer 34 eSports DUO is a Tower CPU cooler with two 120 mm BioniX P-series fans in push-pull configuration. It is a powerful cooling solution for AMD ® & Intel ® CPU and recommended for CPU with a TDP up to 210 W. The push.pull-configuration allows ideal airflow. The pressure-optimised fans create a focused airstream for increased performance. A broad RPM range enables highest performance as well as low noise levels. With high-quality bearings and a new motor-generation, the fans are very quiet, efficient and durable. It offers a 0 db mode, which switches the fans to a silent passive mode with the PWM signal below 5 %.

Excellent Price-Performance Ratio

With two powerful, pressure-optimised BioniX P-fans and its updated, thermal- coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 db(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling colustions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.

New P-fans for Increased Performance

The Freezer 34 eSports benefits of all advantages of our new BioniX P-fan.

• High static pressure for increased cooling performance
• 0 db fan mode below 5 % PWM
• Extended RPM range
• Lower power consumption
• Less vibrations
• Extended life span
• High quality bearing
• PWM PST for synchronous fan control

Improved Heat Dissipation

Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34 eSports.

Ideal airflow

The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-mode. The resulting increase of airflow ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even faster from the heat sink. This ensures the best possible performance of the CPU.

Easy Installation & Secure Hold

Fast and easy to install and extremely reliable, the Freezer 34 eSports mounting system is compatible with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports not only fool-proof to install, but also absolutely transport safe.

High Performance for High-End CPU

The contact surface of the Freezer 34 eSports heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.

MX-4 Thermal Paste included

The high-performance MX-4 thermal compound is included and ensures the best cooling results.

Thermal Coating

A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.

Learn More

Future-Proof Compatibility

At the end of 2022, AMD released the AM5 socket, the successor to its popular AM4 platform. Because all mechanical dimensions remain identical, we can guarantee the compatibility of ARCTIC coolers with AMD's new processors.

Additionally, all coolers shipped by ARCTIC are already compatible with Intel's Alder Lake and Raptor Lake LGA1700 processors. Coolers purchased from resellers, however, may still have been shipped without the corresponding accessories. In this case, please contact our customer support.

Excellent Price-Performance Ratio

With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.

P-Fans for Increased Performance

The Freezer 34 eSports DUO benefits from all advantages of our new BioniX P-fans.

• High static pressure for increased cooling performance
• Extended rpm range
• Lower power consumption
• Fewer vibrations
• Extended life span
• High-Quality bearing
• PWM PST for synchronous fan control

For additional information about the P-fans, we recommend ourFAQ.

Better Performance - Maximum FPS

No thermal throttling on your CPU - even at high turbo clock speeds and overclocking, the Freezer 34 eSports DUO cools quietly, so you can reach the maximum FPS with minimal noise levels for the smoothest possible gaming experience.

Improved Heat Dissipation

Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to ideal heat dissipation for the Freezer 34 eSports DUO.

Ideal Airflow

The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-configuration The resulting increase of airflow ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even faster from the heat sink. This ensures the best possible performance of the CPU.

High Performance for High-End CPU

The contact surface of the Freezer 34 eSports DUO heat pipes does not cover the full heat spreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.

MX-4 Thermal Paste Included

The high-performance MX-4 thermal compound is included and ensures the best cooling results.

Easy Installation & Secure Hold

Fast and easy to install and extremely reliable, the Freezer 34 eSports DUO mounting system is compatible with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports DUO is not only foolproof to install but also absolutely transport safe.

Optimal RAM-Compatibility

Thanks to its compact dimensions of only 124 x 157 x 103 mm, there are almost no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues and are not blocked by the CPU Cooler.

Multilingual Manuals

We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker somewhere convenient and never waste time again looking for product instructions.

Learn More