Connector Cables

Leviton eXtreme High-Flex HD6 Patch Cords are designed to be used in 1 Gigabit applications for all frequencies from 1 to 250 MHz, where Cat 6 patch cords are commonly utilized. Patch cords offer flexible, high-density patching. Cables support high-speed data applications. They reduce patch cord density in a 24-port patch panel by 38 percent when compared to typical Cat 6 patch cords.

Leviton eXtreme High-Flex HD6 Patch Cords are designed to be used in 1 Gigabit applications for all frequencies from 1 to 250 MHz, where Cat 6 patch cords are commonly utilized. Patch cords offer flexible, high-density patching. Cables support high-speed data applications. They reduce patch cord density in a 24-port patch panel by 38 percent when compared to typical Cat 6 patch cords.

Leviton's SlimLine patch cords are bootless and feature a narrow profile to support traditional and today's high density applications. Snagless plug design makes Leviton's SlimLine Patch Cords an excellent choice in environments where moves, adds, and changes are frequent. High-quality patch cords are a critical, and sometimes overlooked, part of any high-performance cabling system. Leviton's eXtreme® 6+ Patch Cords use compliant stranded wire as specified by the latest published TIA guidelines to ensure adequate 'flex life' and long term channel integrity. All of Leviton's patch cords have quality construction to maintain the quality of signal transmission at the cross-connect, which is critical to the performance of the entire cabling system. eXtreme 6+ System components meet or exceed the requirements for channel/component-level performance per TIA/EIA Category 6, and are part of Leviton's high-performance eXtreme 6+ System, which delivers reliable, error-free transmission in an active, real-time network environment. Patching and connecting cords designed for high density panels and switches.

APPLICATION

eXtreme Cat 6 SlimLine Boot UTP Patch Cords feature a narrow profile to support traditional and high-density panels and switches. The snagless plug design makes the patch cords an excellent choice in environments where moves, adds, and changes are frequent.

SPECIFICATION

Patch cords shall meet or exceed requirements for Cat 6 performance described in ANSI/TIA-568-C.2. Patch cords shall be 24-gauge stranded conductor with an 8-position modular plug on each end. The cords shall include a narrow-profile boot that allows for easy cord removal without snagging. The cords shall be available in standard lengths of 3, 5, 7, 10, 15, and 20 feet. Patch cord plug shall be clear and contacts shall have industry-standard, ANSI/TIA-1096-A compliant 50 micro inches of gold plating.

APPLICATION:

eXtreme High-Flex Cat 6 Patch Cords are designed to be used in Cat 6 / 1-Gigabit applications and all frequencies from 1 to 250 MHz. Patch cords offer flexible, high-density patching. Cables support high-speed data applications. They reduce patch cord density in a 24-port patch panel by 38 percent when compared to typical Cat 6 patch cords.

SPECIFICATION:

Patch cords shall provide 1 Gigabit application performance for cross connecting in systems comprising of equipment, cable, and appropriate connectors. The patch cords shall be 28-gauge, unshielded, twisted-pair, stranded conductor construction with a standard 8-position modular plug on both ends. Plug contacts shall be plated with minimum of 50 micro inches of gold and rated to 2,500 mating cycles. Patch cords shall have an outer diameter of 0.15 inches (3.8mm) and shall be available in white, yellow, gray, black, red, green, and blue.

FEATURES

• Available in white, yellow, gray, black, red, green, and blue
• Available in stock lengths of 6 inches (0.15m) or 1-20 feet (0.30 - 6.0m) in 1-foot (0.3m) increments
• Power over Ethernet (PoE and PoE+) compatible
• Accommodate use in high-density switches, routers, and other electronics
• Bend radius is a narrow 0.60 inches (15.2mm), versus 1.0 inch (25.4mm) for typical Cat 6 patch cords
• Snagless plug design with integrated strain-relief boot
• Plug contacts rated to 2,500 mating cycles
• Dual-rated cable jacket (CM/LSZH)

• Designed to provide connectivity for Cat 6 / 1-Gigabit applications
• Available in a variety of colors for color coding or organization
• Channel Length:
• Supports 96-m channels that include 90-m permanent links
• Supports 93-m channels with 10 m of patch cords included in the channel
• Under PoE at 90 watts, maximum bundle size is 12 cables with a separation of 1.5 inches from outer edge to outer edge of cable bundles for 28 AWG cables installed in air and a maximum ambient temperature of 45 ?C (113 ?F), as defined in TIA TSB-184-A

• ANSI/TIA-568.2-D Cat 6
• ISO/IEC 11801-1 Class E
• EN 50173-1 (Class E)
• ANSI/TIA-1096-A (formerly FCC Part 68)
• RoHS 2 compliant
• UL 444 - CM
• IEC 60332-1 [1,2] (2004-07), 60754, 61034
• IEEE 802.3bt PoE: Type 1 (15.4 W) formerly 802.3af, Type 2 (30 W) formerly 802.3at, Type 3 (60 W), Type 4 (90 W)
• Cisco UPoE (60 W), UPoE+ (90 W)
• Power over HDBaseT™ PoH (95 W)