Connector Cables

Leviton Cat 6A Patch Cords exceed all channel performance requirements in ANSI/TIA-568.2-D from 1 MHz to 500 MHz to support the IEEE 802.an standard for 10 Gigabit Ethernet over UTP Cable. The patch cords provide superior alien crosstalk suppression and protect critical data from EMI (electromagnetic interference) and RFI (radio frequency interference). They are ideal for use in a UTP Cat 6A system, or as part of a Cat 6A shielded system for use in health care, manufacturing, casinos, and other environments where alien crosstalk may be a concern.

Cat 6 Small Diameter High-Flex Patch Cords, with a compact plug and boot, are designed to be used in 1-Gigabit applications and all frequencies from 1 to 250 MHz. Patch cords offer flexible, high-density patching. Cables support high-speed data applications. They reduce patch cord density in a 24-port patch panel by 38 percent when compared to typical Cat 6 patch cords.

Leviton eXtreme High-Flex HD6 Patch Cords are designed to be used in 1 Gigabit applications for all frequencies from 1 to 250 MHz, where Cat 6 patch cords are commonly utilized. Patch cords offer flexible, high-density patching. Cables support high-speed data applications. They reduce patch cord density in a 24-port patch panel by 38 percent when compared to typical Cat 6 patch cords.

Leviton's eXtreme CAT 6A SlimLine Patch Cords exceed all component performance requirements in the ratified TIA-568-B.2-10 standard for Augmented Category 6 from 1 MHz to 500 MHz to support the IEEE 802.3an standard for 10GBASE-T network performance. The patch cords provide superior Alien Crosstalk suppression and protect critical data from EMI (electromagnetic interference) and RFI (radio frequency interference). Patch cords are ideal for use in a UTP CAT 6A system, or as part of the Leviton CAT 6A Shielded Solution for use in healthcare, manufacturing, casinos, and other environments where alien crosstalk may be a concern. Leviton's Shielded Solution is Rockwell Automation Encompass™ Approved.

Leviton Cat 6A Patch Cords exceed all channel performance requirements in ANSI/TIA-568.2-D from 1 MHz to 500 MHz to support the IEEE 802.an standard for 10 Gigabit Ethernet over UTP Cable. The patch cords provide superior alien crosstalk suppression and protect critical data from EMI (electromagnetic interference) and RFI (radio frequency interference). They are ideal for use in a UTP Cat 6A system, or as part of a Cat 6A shielded system for use in health care, manufacturing, casinos, and other environments where alien crosstalk may be a concern.

APPLICATION

eXtreme Cat 6 SlimLine Boot UTP Patch Cords feature a narrow profile to support traditional and high-density panels and switches. The snagless plug design makes the patch cords an excellent choice in environments where moves, adds, and changes are frequent.

SPECIFICATION

Patch cords shall meet or exceed requirements for Cat 6 performance described in ANSI/TIA-568-C.2. Patch cords shall be 24-gauge stranded conductor with an 8-position modular plug on each end. The cords shall include a narrow-profile boot that allows for easy cord removal without snagging. The cords shall be available in standard lengths of 3, 5, 7, 10, 15, and 20 feet. Patch cord plug shall be clear and contacts shall have industry-standard, ANSI/TIA-1096-A compliant 50 micro inches of gold plating.

APPLICATION:

eXtreme High-Flex Cat 6 Patch Cords are designed to be used in Cat 6 / 1-Gigabit applications and all frequencies from 1 to 250 MHz. Patch cords offer flexible, high-density patching. Cables support high-speed data applications. They reduce patch cord density in a 24-port patch panel by 38 percent when compared to typical Cat 6 patch cords.

SPECIFICATION:

Patch cords shall provide 1 Gigabit application performance for cross connecting in systems comprising of equipment, cable, and appropriate connectors. The patch cords shall be 28-gauge, unshielded, twisted-pair, stranded conductor construction with a standard 8-position modular plug on both ends. Plug contacts shall be plated with minimum of 50 micro inches of gold and rated to 2,500 mating cycles. Patch cords shall have an outer diameter of 0.15 inches (3.8mm) and shall be available in white, yellow, gray, black, red, green, and blue.

FEATURES

• Available in white, yellow, gray, black, red, green, and blue
• Available in stock lengths of 6 inches (0.15m) or 1-20 feet (0.30 - 6.0m) in 1-foot (0.3m) increments
• Power over Ethernet (PoE and PoE+) compatible
• Accommodate use in high-density switches, routers, and other electronics
• Bend radius is a narrow 0.60 inches (15.2mm), versus 1.0 inch (25.4mm) for typical Cat 6 patch cords
• Snagless plug design with integrated strain-relief boot
• Plug contacts rated to 2,500 mating cycles
• Dual-rated cable jacket (CM/LSZH)

• Designed to provide connectivity for Cat 6 / 1-Gigabit applications
• Available in a variety of colors for color coding or organization
• Channel Length:
• Supports 96-m channels that include 90-m permanent links
• Supports 93-m channels with 10 m of patch cords included in the channel
• Under PoE at 90 watts, maximum bundle size is 12 cables with a separation of 1.5 inches from outer edge to outer edge of cable bundles for 28 AWG cables installed in air and a maximum ambient temperature of 45 ?C (113 ?F), as defined in TIA TSB-184-A

• ANSI/TIA-568.2-D Cat 6
• ISO/IEC 11801-1 Class E
• EN 50173-1 (Class E)
• ANSI/TIA-1096-A (formerly FCC Part 68)
• RoHS 2 compliant
• UL 444 - CM
• IEC 60332-1 [1,2] (2004-07), 60754, 61034
• IEEE 802.3bt PoE: Type 1 (15.4 W) formerly 802.3af, Type 2 (30 W) formerly 802.3at, Type 3 (60 W), Type 4 (90 W)
• Cisco UPoE (60 W), UPoE+ (90 W)
• Power over HDBaseT™ PoH (95 W)

Cat 6A Small Diameter High-Flex Patch Cords are designed to be used in 10 Gigabit applications for all frequencies from 1 to 500 MHz. Patch cords offer flexible, high-density patching. Cables support high-speed data applications. They reduce patch cord density in a 24-port patch panel by 25 percent when compared to typical Cat 6A patch cords.