Connector Adapters
-
ATEN DVI to HDMI Converter - 1 x 25-pin DVI-D Digital Video Male - 1 x HDMI Digital Audio/Video Female - Black
The 2A-127G DVI to HDMI Converter is a bi-directional converter that allows you to connect an HDMI display to a device with a DVI-D display output, or display an HDMI signal on a DVI monitor.
Learn More -
ATEN HDMI to DVI Converter - 1 x HDMI Digital Audio/Video Male - 1 x 25-pin DVI-D Digital Video Female - Black
The 2A-128G HDMI to DVI Converter is a bi-directional converter that allows you to connect an DVI display to a device with a HDMI display output, or display an DVI signal on a HDMI monitor.
Learn More -
Aten Flash/Net Parallel Printer Transmitter-TAA Compliant - 1 x 25-pin DB-25 IEEE 1284 Parallel Female - 2 x RJ-11 Female
The Flash/Net system is a printer sharing network in which up to 24 computers (as many as 64 when adapters are used), can easily share up to 8 printers using inexpensive 4-wire straight-through RJ-11 cabling in a Bus, Star, or Tree topology. Printers are selected either with a manual controller or by software.
With a throughput of up to 22 Kbytes per second (making it faster than any similar network), this advanced, power-free printer network eliminates the need for multiple auto switches and heave, tangled, cables. Easy installation and ease of operation make Flash/Net suitable for users of all levels. Simply plug a transmitter unit into the PC's parallel port; a receiver unit into the printer; connect the units with 4-wire straight-through RJ-11 cabling; and you are ready to go. Transmitters and receivers can be daisy chained allowing up to 24 PCs (as many as 64 with adapters) to connect with up to 8 printers.
Learn More -
Aten RS-232 to RS-422/RS485 Bi-directional Converter-TAA Compliant - 1 Pack - 1 x 25-pin DB-25 RS-232 Serial Female - 4 x RS-485 Serial
IC485AI, the Isolated Converter, is a bi-directional converter that transparently converts RS-232 signals to RS-422/RS-485 signals (and vice versa), thus permitting the creation of reliable long distance communication systems using standard computer hardware.
IC485AI provides point-to-point, multi-drop, and simplex operations over 4000 feet. Designed with built-in optocouplers for exceptional signal isolation, plus transformers for excellent power isolation, this extremely reliable isolated converter enhances the quality of the data communication. At the same time, it protects your equipment from electrical surges of up to 2000 Volts.
Learn More$120.81 -
Aten RS-232 to RS-485/RS-422 Adapter-TAA Compliant - Plastic
The IC485SN is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. The IC485SN is a bi-directional interface converters for RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point, Multidrop and Simplex operations.
Learn More -
ATEN USB-C to VGA Adapter - 1 Pack - USB Type C - 1 x VGA
The UC3002 is a USB-C to VGA adapter that allows you to transfer the video of your USB-C equipped laptop, tablet or computer to a VGA display or projector. The UC3002 supports high video resolutions up to 2048 x 1152 @ 60 Hz so that you can conveniently scale your display output to a bigger monitor or do presentations from a projector.
Learn More