Cable Extenders
-
AXIS T8640 PoE+ over Coax Adapter Kit
- Carries PoE and PoE+ over the Coax cable
- Reliable configuration
- One channel
AXIS T8640 PoE+ over Coax Adapter Kit comprises AXIS T8641 PoE+ over Coax Base Unit and AXIS T8642 PoE+ over Coax Device Unit. It can also be used in those installations that require PoE transmissions over 100 m (328 ft). A full-rate network connection is delivered over maximum cable ranges of 500 m, which far exceed most recommended distances for analog video installation. An optional power supply can be used if PoE is not available, or if higher power for the network camera is needed. Please check the Setup-tab or Range-tab below for more information.
RangeRange figures assume short (< 5 m or 16 ft) Cat-5e cables between equipment.
Learn More$383.33 -
AXIS T8129 PoE Extender
Ethernet and PoE connections both restrict cable distances to 100 meters (328 ft.) between network ports. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable.
Learn More$193.83 -
AXIS Long Range PoE Extender Kit - Network (RJ-45) - 3280.84 ft Extended Range - Aluminum
- Extends Ethernet and PoE connections up to 1000m (3280 ft)
- Supports IEEE 802.3af, IEEE 802.3at compliant devices
- NEMA TS2 Compatible
- Cost efficient solution
Going the distance
By using a single AXIS Long range PoE Extender kit, a connection can be achieved between 200-1000 meters (656-3280 ft.). The product automatically configures for link speed, duplex and crossover. Range depends on cable type used, the desired data rate and power required, find out more here. AXIS Long range PoE Extender kit can be powered from conventional IEEE 802.3af or IEEE 802.3at midspans and switches or AXIS T8003 PS57 for maximum range and power.
Cost efficient and easy to install
Save time and cost in installation. With AXIS Long range PoE Extender kit there is no need to lay expensive fiber optics, or allocate additional infrastructure and hardware in the middle, like media converters or switches. Plug and play, AXIS Long Range PoE Extender kit self-configures for the best performance. No set-up or configuration is needed. The diagnostic LEDs indicates power level of installation and if there are errors, improving quick diagnostics of the installation.
Learn More$462.04 -
AXIS T8643 PoE+ over Coax Compact - White
AXIS PoE+ Over Coax lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality.
Learn More$201.63 -
AXIS T8129-E Outdoor PoE Extender - Network (RJ-45) - 328.08 ft Extended Range
AXIS T8129-E Outdoor PoE Extender offers a smart and easy-to-install solution for extending the range of your network - with no additional power supply. Without being restricted by the 100m (328ft.) limit for Ethernet cables, Axis network video products can be installed at greater distances. Simply connect AXIS T8129-E in-line with the CAT5e or CAT6 cable and power is forwarded to your Axis network video product.
Wide compatibility
A perfect match with all Axis network video products, AXIS T8129-E Outdoor PoE Extender supports PoE, and it is both IEEE 802.3af, IEEE 802.3at and High PoE 60 W compatible. With its rugged, IP66/IP67-rated enclosure, AXIS T8129-E withstands harsh environmental conditions and challenging temperatures.
Covering the distances
Range depends on the power required so depending on midspan and camera type the connection can in total be between 200-400 meters (656-1312 ft.). For instance, a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129-E. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129-E at 100 m (328 ft.) intervals.
Learn More$276.85
