Hardware Connectivity
-
Platinum Tools Network Connector - 10 - 1 x RJ-45 Network Male
Combining the performance exclusive to the EZ-RJ45 design with the advantages inherent to shielded products for a unparalleled solution. In applications where NEXT, FEXT and AXT are an issue, using shielded products can be the solution. Designed to work on both Cat5e and Cat6 cables, solid or stranded.
Learn More -
Platinum Tools EZ-RJ12/11 Connector - RJ-12
Platinum Tools EZ-RJ12/11 Connector - RJ-12 Learn More -
Platinum Tools EZ-RJ45 Cat5e Strain Relief (Clear), 50/Clamshell - 50 - 1 x RJ-45 Network Male - Clear
Platinum Tools EZ-RJ45 Cat5e Strain Relief (Clear), 50/Clamshell - 50 - 1 x RJ-45 Network Male - Clear Learn More -
Platinum Tools EZ-RJ45 Cat 6+ Connector - RJ-45
The Original EZ-RJ45 CAT6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized!
Recommended for Data Applications Only
Rated to 1 Gb
Crimp with one of the Platinum Tools EZ-RJ45 Crimp Tools.
*Part Numbers 100062, 100054 or 100004- Max Cable Outer Diameter: 0.275" (6.98mm)
- Max Insulation Diameter (Conductors): 0.040" (1.016mm)
- Meets ANSI/EIA/TIA/TAA specifications
- UL Listed E188111, UL94 V-0 and RoHS3/FCC compliant
- Solid or Stranded, 24 - 23 AWG
- 50 micron gold plated contacts
- Color: Clear/Transparent
- Made in USA
-
Platinum Tools Shielded EZ-RJ45 for CAT5e & CAT6 with Internal Ground - 50 - 1 x RJ-45 Network Male - Shielding - TAA Compliant
The Original EZ-RJ45® fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45® design with the performance advantage inherent to shielded products to provide an unparalleled solution for the market.
WARNING: Platinum's EZ-RJ45 connectors and crimp tools are designed to work as a system. Platinum Tools' products are NOT intended to be compatible with other brands and such unintended use can result in bad connections, breakage, and human safety hazards, and will also void the warranty. Platinum is not responsible for any unintended uses of its products.- EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
- Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
- Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
- Significantly improve Shannon capacity.
- Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
- Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
- Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040")
- For solid round or stranded wire cables.
- Made in the USA
- TAA Compliant
-
Platinum Tools Shielded EZ-RJ45® for CAT5e & CAT6 with External Ground - 50 - 1 x RJ-45 Network Male - Shielding - TAA Compliant
The Original EZ-RJ45® shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable & shielded connectors.
- For use with CAT5e/6+ shielded cable
- For solid round or stranded wire cables.
- Max Cable OD: 7.11mm (0.280"),
- Max Insulated wire OD: 1.016mm (0.040")
- UL Rated, FCC compliant
- TAA Compliant
