Hardware Connectivity

You save 83% Connect your nVIDIA or PNY , Quadro , or Matrox QID multiple display graphics cards with our LFH-59 cables with gold-plated contacts that provide full conductivity with no data loss. Many high-end work stations utilize multiple display graphics cards that only have a single LFH-59 or LFH-60 (also known as DMS-59 and DMS-60) connection. A breakout cable is necessary to convert this single connection into two more common monitor interfaces such as DVI or VGA.

This cable is designed to provide RS-232 serial control of Mitsubishi projectors when used in conjunction with a classroom controller such as the Trulink A/V Controller (#40099). It features a standard DB9 female connector to a 8-Pin Mini-Din Male connector configured to match Mitsubishi projectors and matches the Receive (RX) and Transmitssion (TX ) lines for easy installation and immediate operation.

This extension cable actively buffers the incoming and outgoing signals to ensure compliance with the USB 2.0 specification for electrical and timing minimums. You can connect up to 3 active extension cables end-to-end to achieve up to 118 feet (36 meter) total extension. Both low and high speed USB devices will function equally well with this extension cable. The active chip is built into the female connector so you can easily install this cable in conduit or raceway.

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.

More from the Manufacturer

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements. Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.

More from the Manufacturer