Hardware Connectivity

The Original EZ-RJ45 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized

Specifications:

• Max. Cable Outer Diameter: EZ-RJ45 Cat5e - 0.240" (6.09mm) EZ-RJ45 Cat6 - 0.275" (6.98mm) EZ-RJ45 Cat5e/6 STP Int. Ground - 0.260" (6.60mm) EZ-RJ45 Cat5e/6 STP Ext. Ground - 0.280" (7.11mm) Max. Insulation Diameter (Conductors): 0.040" (1.016mm) Same for all EZ-RJ45 Connectors
• Meets ANSI/EIA /TIA/TAA specifications
• Solid or Stranded, 24 thru 23 AWG
• UL Listed and RoHS/FCC compliant
• 50 micron gold contacts
• Color: Clear/Transparent
• Made in USA

This 2 piece system makes terminating CAT6 quick & easy. The staggered loading bar acts as the stopping point for pair separation and maintains wiring configuration. Simply flush cut the conductors and slide assembly into the connector and terminate.

• Eight conductor mod plug with loading bar
• Liner Bar P/N: 106189
• For conductors with an O.D. Range of .044
• Uses 0.30mm (.012)
• 3 prong contact for solid conductors only
• Max cable jacket O.D., .280
• RoHS & UL Compliant

This shielded, patented ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame® and EXO-EX Die™ (100061C).

• Hi-Lo stagger to isolate each conductor
• Simple one piece/pass through design, no bars or liners
• Shielded 6/6A compliant
• Insulation Diameter (Conductor) - Size range: 0.043" - 0.048" (1.09 -1.22mm)
• Max Outer Diameter: 0.305" (7.75mm)
• Solid or Stranded 23-22 AWG
• 50 micron gold plated contacts
• TAA, TIA, RoHS, UL & FCC compliant
• Made in the USA
• US Patents 9,543,729 B2; 10,116,082 B2; & 10,573,990 B2. Foreign patents.

Streaming Media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6E, CAT6A, CAT7, and Industrial CAT5e. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements.

• Max cable jack OD: 8.5mm/0.335"
• Max cable conductor OD: 1.35mm/0.053"
• Exceeds 10-Gig performance standards
• Individual conductor OD range: 0.042" - 0.053" (1.07mm-1.35mm)
• Wire gauge range (AWG) 24-22
• 50µ Gold Contacts
• Works with CAT6E, CAT6A, CAT7, and Industrial CAT5e
• UL and RoHS compliant
• Connector is only compatible with our Tele-TitanXg™ and Tele-TitanXg™ 2.0 Crimp Tool.
• Designed for both shielded and unshielded cabling

Platinum Tools' SealSmart Compression Connectors provide simple, fast and reliable terminations. The perfect solution for CATV, DSS, Security, Home Theater and Residential Structured wiring installations.

• Molded in gasket provides a weather tight seal at cable entry.
• Single crimp termination with captive center contact design.
• Universal crimp tool terminates all three SealSmart Connector designs.

The EZ-RJ12/11 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order prior to termination. Use the EZ-RJPRO HD™ Crimp Tool (P/N 100054) or EXO Crimp Frame® with EZ-12/11 Die (100061 & 100073C) for single cycle crimping and trimming of the excess wire. FCC compliant and UL rated. Made in the USA.

• For use in telephone & security installations.
• Faster, easier terminations with reduced scrap.
• For specialized telephone installations & communications equipment.
• For applications requiring custom/specific wire configurations.
• Works on solid or stranded wire.
• Designed for 6, 4, and 2 conductor applications.

This 2 piece shielded system makes terminating CAT6 quick & easy. The staggered loading bar acts as the stopping point for pair separation and maintains wiring configuration. Simply flush cut the conductors and slide assembly into the connector and terminate.

• Eight conductor mod plug with loading bar
• Liner Bar Part No.: 1041
• For conductors with an O.D. Range of .044
• Uses 0.30mm (.012)
• 3 prong contact for solid conductors only
• Max cable jacket O.D., .285
• RoHS & UL Compliant

Stop Punching - Platinum's new Keystone Couplers terminate in half the time of standard keystones!

How often are loose connections in punchdown keystones the cause of install delays or service callbacks? Eliminate this potential trouble spot with our new Keystone Couplers. Simply terminate the cable with the Platinum RJ45 connector of your choice, plug it into the back of the Keystone Coupler, then snap the Coupler into a wall plate or surface mount box. For even more customization, combine with our unloaded patch panels for fast wiring and total flexibility.

• Terminates in 1/2 the time of punchdown keystones
• No compromise in data throughput speeds
• Fast, easy, F to F connection using RJ45 connectors
• Standard keystone size works with most wall plates, surface-mount boxes, and unloaded patch panels