Accessories
-
AtlasIED Stand-Alone Floor Rack With Fixed Rails 18.5 Inch Deep, 44RU - For A/V Equipment - 44U Rack Height x 19" Rack Width x 17" Rack Depth - Standalone, Floor Standing - Textured Black Epoxy - Cold Rolled Steel - TAA Compliant
The 100 Series Cabinets are 18 1/2" deep, 22 5/16"" wide, and avail?able in five different RU heights, 21RU, 24RU, 35RU, 40RU and 44RU. The cabinets are welded 16-gauge CRS and assembled for immediate use.
Rear doors are hung with quick-release spring hinges which allow them to be rotated 180° for right- or left-hand opening. Rear door includes flush door handle and cylinder lock. See chart on back for appropriate Optional front door model numbers. If front door is ordered, it will be keyed differently than the rear door for security.
The 100 Series Cabinet line offers several installer-friendly advantages, including a 6RU standard panel width opening in the cabinet top and conduit arrays. The top opening can be left open for wire access and/or ventilation partially covered with the ISOPANEL™ for non-conductive cable access or closed using 2
5 1/4" (3 RU) panels. Top opening is also perfect for installing EFP Series fan. Conduit arrays are located on the top and bottom surface panels, as well as the top and bottom back flanges. Flange arrays consist of five knockouts, three 1" (25 mm) standard, and two, 1/2" (13 mm) 3/4" (19 mm) concentric. Surface arrays are comprised of 4 knockouts: two 1" (25 mm) standard knockouts and two 1/2" (13 mm) 3/4" (19 mm) concen?tric.
Stamped, perforated vents are located on front, sides and rear door to allow for maximum air convection.
Cabinets include one pair of 12-gauge, CRS fixed mounting rails tapped 10-32 and recessed 5/8" (16 mm). Rails are standard E.I.A. spacing.
Cabinet surface is phosphate pre-treated for proper paint adhesion. Standard finish is textured black epoxy #962.
Learn More$767.60 -
AtlasIED 310-15 Rack Cabinet - 10U Rack Height x 19" Rack Width x 15" Rack Depth - Black - Cold-rolled Steel (CRS), Steel
The 300 Series wall cabinets are welded with center-section depths of 12" and 15", respectively. Basic model includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 12" or 15" deep center section with adjustable mounting rails, and a 4-1/2" deep rear door. Panel space openings range from 7 RU to 35 RU. Enclosures are equipped with provisions for custom cabinet mounting, wire man?agement, equipment mounting, and structural support. Cabinet is finished in #962 black epoxy.
All models include adjustable front rack rails tapped 10-32, and manufactured to standard E.I.A. 1/2" spacing. Models with RU openings of 16RU, 24RU and 35RU are equipped with center section mounting rail supports.
Internal open raceways provide cable pathways in the cabinet. Corner brace supports, which straddle the back and side panel of the rear section (hinge side), also feature round (1-1/4" diameter) wire access holes for harnessing excess wire. The back face of the rear section is equipped with 1/4" deep boss detents which give Contractors field flexibility to install a custom plywood, aluminum, or steel sub-plate for mounting accessories inside the cabinet. Boss detents are on 12" centers and vary depending upon model height (10RU, 12RU, and 16RU models have four detents, 24RU models have six detents and 35RU models have eight detents).
The cabinets have 20 conduit knockouts on the rear section, with the exception of the 307-12 which has 16. Conduit arrays are located at the top and bottom of the back panel (except 307-12 which has a centered array), as well as on the top and bottom back flanges. Panel arrays consist of four knockouts: two 1" (25mm) standard and two 1/2" (13mm) / 3/4" (19mm) concentric. Top and bottom flange arrays are comprised of six knockouts: three 1" (25mm) standard and three 1/2" (13mm) / 3/4" (19mm) concentric.
Learn More$597.58 -
AtlasIED Charging Station for Use with AL-MAGPIE Wireless Transmitters - Docking - Wireless Microphone - Charging Capability
The AL-MAGPIE-NEST is the charging station designed to be used with the Atlas Learn AL-MAGPIE wireless infrared microphone. The AL-MAGPIE-NEST is a low profile charging system that is designed to be desk or shelf mounted for easy access. The unit can charge up to two AL-MAGPIE wireless microphones at the same time. Charging status is indicated by the LED located next to each charging position. Red indicates that the unit is charging and green indicates the unit is fully charged and ready to be used. AL--MAGPIE-NEST includes the charging station and power supply. AL-MAGPIE microphones are sold separately. Use only AtlasIED rechargeable batteries with NEST and transmitter.
Learn More -
AtlasIED AT100 RM Hard Wire Dimmer - Rotary Dimmer - Volume Control - Black Knob
AtlasIED AT100 RM Hard Wire Dimmer - Rotary Dimmer - Volume Control - Black Knob Learn More -
AtlasIED BlueBridge 7" Touch Panel Wall Controller
The BBWP-TOUCH7B is a 7 inch touch screen control with multi-page control flexibility. The unit is designed to work with AtlasIED BlueBridge® Designer software allowing for remote control of integrator configured DSP settings. The screen is fully customizable using BlueBridge® Designer software allowing for multi-page control. Unit includes a complete flush mount kit (adapter plate and back box).
Learn More$954.30 -
AtlasIED Mounting Adapter for Speaker - Cast Aluminum
BX-1A is a vandal resistant cover plate for armored cable and conduit connection. For mounting on APC-30 and APW-30T horn speakers. Constructed of cast aluminum. Threaded for 1/2" pipe thread.
Learn More
