Accessories
-
Crestron CCS-UCA-SMK Desk Mount for Conference System - Gray
The CCS-UCA-SMK is a low-profile swivel mount accessory for the Crestron Mercury™ Tabletop Conference System (model CCS-UC-1). It provides a means for permanently mounting the device to a tabletop surface while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of approximately 180-degree rotation allowed.
The swivel mount may be installed on any flat, level surface with a thickness of 1 inch (25 mm) minimum to 1-3/8 inch (35 mm) maximum. Wiring is routed through the center of the swivel mount, passing beneath the mounting surface for a completely hidden appearance.
Learn More$160.66 -
Crestron UC-CAM-WMK Wall Mount for Camera, Webcam - Black
The UC-CAM-WMK Wall Mount Kit provides secure mounting options for select Crestron® Collaboration Cameras (not included). It comes with two mounting brackets and mounting hardware that allow for a variety of mounting locations. The smaller bracket allows the back of the camera to be placed 2 to 3.5 in. (51 to 89 mm) off the wall, while the larger bracket allows the back of the camera to be placed 3.5 to 5 in. (89 to 127 mm) off the wall.
NOTE: When using the UC-CAM-WMK with the CCS-CAM-USB-F-100, the smaller bracket allows the back of the camera to be placed 2.25 to 3 in. (57 to 76 mm) off the wall, while the larger bracket allows the back of the camera to be placed 3.75 to 4.55 in. (95 to 116 mm) off the wall.Key Features
- Provides secure mounting options for select Crestron® Collaboration Cameras (not included)
- Large and small brackets allow a camera to be installed in a variety of locations
- Includes brackets and mounting hardware
-
Crestron Accessory Kit for UC-B140-Z and UC-B140-T
The UC-B-ACCY kit contains all cables and accessories necessary for setup and use of the UC-B140-Z or UC-B140-T video conference systems.
Wireless Keyboard
The UC-B-ACCY includes the CCS-UCA-KB-USB Wireless Keyboard with Touchpad and USB wireless receiver. The wireless keyboard is used for system configuration.Certified HDMI® Interface Cable, 20 ft (6.1 m)
The CBL-HD-20 high-speed HDMI digital AV interface cable connects HD and 4K multimedia equipment and supports full 4K60 4:4:4 video. As part of the UC-B140-Z or UC-B140-T system, the CBL-HD-20 connects an HDMI source to the system via the HDMI port on the HD-CONV-USB-200.DigitalMedia™ Ultra Patch Cable, 20 ft (6 m)
The DM-CBL-ULTRA-PC-20 fully-shielded CAT6a patch cable connects the touch screen (TSW-1060-B-S) to the PoE injector (PWE-4803RU). It ensures the highest performance and reliability for distributing Ethernet data and uncompressed 4K/60 video.USB-C™ to HDMI Converter Cable, USB Type-C™ Male to HDMI Type A Male, 9 ft (2.7 m)
Learn More
The CBL-USBC-HD-9 video interface cable connects a display to the UC-ENGINE-SD via the available USB-C port.$191.95 -
Crestron Accessory Kit for UC-M130-T and UC-M130-Z
The UC-B-ACCY kit contains all cables and accessories necessary for setup and use of the UC-B140-Z or UC-B140-T video conference systems.
Wireless Keyboard
The UC-B-ACCY includes the CCS-UCA-KB-USB Wireless Keyboard with Touchpad and USB wireless receiver. The wireless keyboard is used for system configuration.Certified HDMI® Interface Cable, 20 ft (6.1 m)
The CBL-HD-20 high-speed HDMI digital AV interface cable connects HD and 4K multimedia equipment and supports full 4K60 4:4:4 video. As part of the UC-B140-Z or UC-B140-T system, the CBL-HD-20 connects an HDMI source to the system via the HDMI port on the HD-CONV-USB-200.DigitalMedia™ Ultra Patch Cable, 20 ft (6 m)
The DM-CBL-ULTRA-PC-20 fully-shielded CAT6a patch cable connects the touch screen (TSW-1060-B-S) to the PoE injector (PWE-4803RU). It ensures the highest performance and reliability for distributing Ethernet data and uncompressed 4K/60 video.USB-C™ to HDMI Converter Cable, USB Type-C™ Male to HDMI Type A Male, 9 ft (2.7 m)
Learn More
The CBL-USBC-HD-9 video interface cable connects a display to the UC-ENGINE-SD via the available USB-C port.$191.95 -
Crestron TSW-770-MSMK-B-S Surface Mount for Touchscreen Monitor, Light Bar - Black Smooth
The TSW-770-MSMK multisurface mount kit provides a versatile surface mounting solution for a TSW-770 or TSS-770 series touch screen. Using the multisurface mount kit, the touch screen can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. TSW-770-MSMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW-770-LB light bar to provide a clear indication of the room availability status.
The TSW-770-MSMK attaches securely to a flat, smooth surface without screws using the included peel-and-stick adhesive rear housing. For a finished appearance when mounted to a transparent glass wall, an adhesive molded plastic cap is provided, which simply affixes to the opposite side of the glass behind the unit. Templates are provided for the MSMK and the plastic cap to help ensure that both are level and properly aligned with the surface.
The TSW-770-MSMK comes complete with a self-adhering plastic raceway for use on smooth surfaces, which conceals cables running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 ft (0.91 m) sections, as well as an assortment of elbows and couplings.
The TSW-770-MSMK rear housing provides four cutout holes (on the top, bottom, and sides of the housing) for running concealed cables to the touch screen using the included adhesive-backed raceway. A plastic cover with an opening for the raceway is attached to the rear housing to conceal any unused cutouts.Key Features
- Permits flush mounting a TSW-770 or TSS-770 series touch screen to virtually any flat, smooth surface
- Ideal for mounting at the entrance to a meeting space for room scheduling applications
- Supports glass surface and partition mounting
- Compatible with the TSW-770-LB light bar for a clear indication of the room availability status
- Secure, screwless installation using the peel-and-stick adhesive rear housing
- Provides an assortment of raceway to conceal wiring
- Includes a rotatable plastic cover to conceal unused cutouts
- Available in smooth black or white finish
$100.00 -
Crestron TSW-770-MSMK-W-S Surface Mount for Touchscreen Monitor, Light Bar - White Smooth
The TSW-770-MSMK multisurface mount kit provides a versatile surface mounting solution for a TSW-770 or TSS-770 series touch screen. Using the multisurface mount kit, the touch screen can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. TSW-770-MSMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW-770-LB light bar to provide a clear indication of the room availability status.
The TSW-770-MSMK attaches securely to a flat, smooth surface without screws using the included peel-and-stick adhesive rear housing. For a finished appearance when mounted to a transparent glass wall, an adhesive molded plastic cap is provided, which simply affixes to the opposite side of the glass behind the unit. Templates are provided for the MSMK and the plastic cap to help ensure that both are level and properly aligned with the surface.
The TSW-770-MSMK comes complete with a self-adhering plastic raceway for use on smooth surfaces, which conceals cables running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 ft (0.91 m) sections, as well as an assortment of elbows and couplings.
The TSW-770-MSMK rear housing provides four cutout holes (on the top, bottom, and sides of the housing) for running concealed cables to the touch screen using the included adhesive-backed raceway. A plastic cover with an opening for the raceway is attached to the rear housing to conceal any unused cutouts.Key Features
- Permits flush mounting a TSW-770 or TSS-770 series touch screen to virtually any flat, smooth surface
- Ideal for mounting at the entrance to a meeting space for room scheduling applications
- Supports glass surface and partition mounting
- Compatible with the TSW-770-LB light bar for a clear indication of the room availability status
- Secure, screwless installation using the peel-and-stick adhesive rear housing
- Provides an assortment of raceway to conceal wiring
- Includes a rotatable plastic cover to conceal unused cutouts
- Available in smooth black or white finish
$100.00
