Accessories
-
Crestron AC Power Outlet Module for FT2 Series, Single, Universal - 10 A
Crestron® FT2A-PWR-UN Series AC Power Outlet Modules are designed for use with a Crestron FT2 Series FlipTop™ cable management system to provide one or more convenience receptacles to power laptops and other AC powered devices at the table.
The FT2A-PWR-UN-1-BASIC provides one outlet. A single 2.74 m (9 ft) mating power cable connects the AC power outlet module to an AC power source via a detachable cord set (not included).
The FT2A-PWR-UN-1-BASIC AC power outlet module is rated for 10 A at 120-240 VAC, 50/60 Hz. The module is suitable for use in the US, Canada, Mexico, Europe, UK, Japan, Korea, Singapore, Saudi Arabia, Australia, New Zealand, China, and other countries or regions where Type B, G, or I power outlets are used. The FT2A-PWR-UN-1-BASIC occupies two consecutive module slots within the FlipTop.
Learn MoreRegular Price: $122.00
Special Price $114.68
-
Crestron CCS-UCA-SMK Desk Mount for Conference System - Gray
The CCS-UCA-SMK is a low-profile swivel mount accessory for the Crestron Mercury™ Tabletop Conference System (model CCS-UC-1). It provides a means for permanently mounting the device to a tabletop surface while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of approximately 180-degree rotation allowed.
The swivel mount may be installed on any flat, level surface with a thickness of 1 inch (25 mm) minimum to 1-3/8 inch (35 mm) maximum. Wiring is routed through the center of the swivel mount, passing beneath the mounting surface for a completely hidden appearance.
Learn MoreRegular Price: $160.66
Special Price $151.02
-
Crestron TSS-470E-RMB-2G Mounting Bracket for Room Scheduling Touch Screen - Metal
The TSS-470E-RMB-2G retrofit mounting bracket is used to mount aTSS-470E-B-T desk scheduling touch screen over a flush wall-mounted 2-gang U.S. electrical box. The TSS-470E-RMB-2G is ideal for applications that require low voltage termination in an in-wall electrical box near a reservable space. A security screw is also provided to prevent unauthorized removal of the touch screen from the mounting bracket.
The included adapter plate covers the mounting hardware and may be painted to match the wall surface or surrounding decor.
Learn MoreRegular Price: $80.00
Special Price $75.20
-
Crestron Tabletop Cradle for up to four AM-TX3-100 Adaptors - Docking - 4 Slot - Tabletop
The AM-TX3-100-CRADLE is a tabletop cradle that holds up to four AM-TX3-100 adaptors. The cradle can magnetically attach to a second AM-TX3-100-CRADLE (sold separately) to store additional AM-TX3-100 adaptors.
Key Features
- Tabletop cradle that holds up to four AM-TX3-100 adaptors
- Magnetically attaches to a second cradle (sold separately) to store additional adaptors
Regular Price: $160.00
Special Price $150.40
-
Crestron Active Converter Cable, DisplayPort to HDMI®, 18 Gbps, 6 ft (1.8 m) - 5.91 ft DisplayPort/HDMI A/V Cable for Audio/Video Device, Notebook - First End: 1 x Displayport Digital audio/video - Male - Second End: 1 x HDMI Digital audio/video - Mal
Provides a high-performance digital AV interface cable that converts a DisplayPort source to an HDMI® output signal. It enables a laptop or other AV source with a DisplayPort type output to be connected to any device with an HDMI type input. Each connector features a robust sculpted boot for easy handling.
Learn MoreRegular Price: $132.00
Special Price $124.08
-
Crestron Gravity Cable Retractor for FT2 Series, USB-C® to HDMI®, 18 Gbps - Cable Retractor - Black - Metal, Plastic
Crestron® Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with CrestronFT2 Series FlipTop™cable management systems. Each cable pulls out smoothly to any length up to 34 inches (86 cm) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop™ allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical enclosure beneath the table.
Each Gravity Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A 4 foot long cable tail is provided below the table for connection to a DM® transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use. Each module is labeled with an international symbol icon indicating the connection type, which is backlit when installed in an "Electrical" FT2 FlipTop. When installed in a "Mechanical" FlipTop, the symbol icon remains legible but is not backlit.
The pass-through module occupies two module spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding anFT2A-CBLR-BRKT seriesmid-row adapter bracket (one per row, each sold separately). Installation requires 28-7/16 inches (722 mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 2-3/8 inches (60 mm) horizontal clearance to either side of the chassis, while mid-row retractors require 2-3/4 inches (70 mm) horizontal clearance to the front or rear of the chassis.
Several models of gravity cable retractors are offered. The following "4K" models feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.
- HDMI® to HDMI -Model FT2A-CBLR-GR-4K-HD provides a retractable High-Speed HDMI® cable with a male HDMI Type A connector at both ends.
- DisplayPort™ to DisplayPort -Model FT2A-CBLR-GR-4K-DP provides a retractable DisplayPort cable with a male DisplayPort connector at both ends.
- DisplayPort to HDMI -Model FT2A-CBLR-GR-4K-DP-HD provides a retractable cable with a male DisplayPort connector at the source end above the table and a male HDMI Type A connector at the sink end below the table; converts DisplayPort to HDMI to allow connection of a DisplayPort source to an HDMI input.
Regular Price: $330.00
Special Price $310.20
