Accessories

The TSW-1070-MSMK multisurface mount kit provides a versatile surface mounting solution for a TSW-1070 or TSS-1070 series touch screen. Using the multisurface mount kit, the touch screen can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. TSW-1070-MSMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW-1070-LB light bar to provide a clear indication of the room availability status.

The TSW-1070-MSMK attaches securely to a flat, smooth surface without screws using the included peel-and-stick adhesive rear housing. For a finished appearance when mounted to a transparent glass wall, an adhesive molded plastic cap is provided, which simply affixes to the opposite side of the glass behind the unit. Templates are provided for the MSMK and the plastic cap to help ensure that both are level and properly aligned with the surface.

The TSW-1070-MSMK comes complete with a self-adhering plastic raceway for use on smooth surfaces, which conceals cables running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 ft (0.91 m) sections, as well as an assortment of elbows and couplings.

The TSW-1070-MSMK rear housing provides four cutout holes (on the top, bottom, and sides of the housing) for running concealed cables to the touch screen using the included adhesive-backed raceway. A plastic cover with an opening for the raceway is attached to the rear housing to conceal any unused cutouts.

Key Features

• Permits flush mounting a TSW-1070 or TSS-1070 series touch screen to virtually any flat, smooth surface
• Ideal for mounting at the entrance to a meeting space for room scheduling applications
• Supports glass surface and partition mounting
• Compatible with the TSW-1070-LB light bar for a clear indication of the room availability status
• Secure, screwless installation using the peel-and-stick adhesive rear housing
• Provides an assortment of raceway to conceal wiring
• Includes a rotatable plastic cover to conceal unused cutouts
• Available in smooth black or white finish

The Crestron® TSW-UMB-70 universal mounting bracket provides a simple in-wall mounting solution for TSW-570,TSW-770,TSW-1070,TSS-770, and TSS-1070 series touch screens. The TSW-UMB-70 is also compatible with TSW-570P series touch screens when mounted in portrait orientation.

NOTE: TSW-570 and TSW-570P series touch screens ship with one TSW-UMB-70 included.

By itself, the TSW-UMB-70 is a postconstruction solution that allows the touch screen to be retrofitted into existing drywall or paneling. The bracket is also suitable for use in a lectern or podium. Because the TSW-UMB-70 fits all supported touch screen models, a touch screen can be replaced easily without needing to cut or patch the wall.

For preconstruction wall mounting applications, the TSW-UMB-70 can be used along with the TSW-UMB-70-PMK orTSW-UMB-570P-PMK mounting kits. For masonry and concrete installations, the TSW-UMB-70 can be used along with the TSW-UMB-70-BBI wall mount back box.

The TSW-770/1070-MUMK permits a TSW-770, TSW-1070, TSS-770, or TSS-1070 series touch screen touch screen to be attached to the mullion of an interior glass wall, window, or partition. The TSW-770/1070-MUMK mounts a compatible touch screen to the left or right of any hollow, metallic vertical mullion. Two mounting brackets are provided that allow the TSW-770/1070-MUMK to be installed in one of two configurations (side mount or front mount). Wiring is run to the touch screen from inside the mullion to create a clean, finished appearance.

The TSW-770/1070-MUMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW-770-LB and TSW-1070-LB light bars to provide a clear indication of the room availability status.

Key Features

• Permits mounting a TSW-770, TSW-1070, TSS-770, or TSS-1070 series touch screen to the mullion of an interior glass wall, window, or partition
• Ideal for mounting at the entrance to a meeting space for room scheduling applications
• Installs in either side or front mount configuration
• Wiring is run inside the mullion for a finished appearance
• Compatible with TSW-770-LB and TSW-1070-LB light bars for a clear indication of the room availability status
• Available in black or white finish

The TSW-770/1070-MUMK permits a TSW-770, TSW-1070, TSS-770, or TSS-1070 series touch screen touch screen to be attached to the mullion of an interior glass wall, window, or partition. The TSW-770/1070-MUMK mounts a compatible touch screen to the left or right of any hollow, metallic vertical mullion. Two mounting brackets are provided that allow the TSW-770/1070-MUMK to be installed in one of two configurations (side mount or front mount). Wiring is run to the touch screen from inside the mullion to create a clean, finished appearance.

The TSW-770/1070-MUMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW-770-LB and TSW-1070-LB light bars to provide a clear indication of the room availability status.

Key Features

• Permits mounting a TSW-770, TSW-1070, TSS-770, or TSS-1070 series touch screen to the mullion of an interior glass wall, window, or partition
• Ideal for mounting at the entrance to a meeting space for room scheduling applications
• Installs in either side or front mount configuration
• Wiring is run inside the mullion for a finished appearance
• Compatible with TSW-770-LB and TSW-1070-LB light bars for a clear indication of the room availability status
• Available in black or white finish

The Crestron® UCA-SMKR-UC2-3 is a low-profile swivel mount cable retractor for Crestron Flex Advanced Tabletop Small Room Conference Systems (UC-MMX30 series). It provides a means for permanently mounting the tabletop conference device to a table. The UCA-SMKR-UC2-3 rotates up to 170° and retracts the installed cables for easy cleanup.

The installed cables support Bring Your Own Device (BYOD) connectivity above the table and UC-PR (included with the UC-MMX30 series) connections below the table.

When pulled out to their full extended length, the USB-A to Micro USB-B, HDMI®, and USB-C® cables lay on top of the table without retracting back below. To retract an extended cable, gently tug and release it.

The swivel mount cable retractor may be installed on any flat, level surface with a thickness of .75 in. (19 mm) minimum to 1.5 in. (38 mm) maximum.