Accessories

Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.

Applications:

• Extend Network link distance in an industrial environment over 700m
• Retrofit digital IP cameras in an analog CCTV CAT5e wired installations.
• Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

The Pace1PTM is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via a single twisted pair (UTP) (when paired with Pace1PRM) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PTM will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) (when paired with Pace1PRM) or structured cable. Applications:

• Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
• Extend Network link distance in an industrial environment.
• Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. With proper head end equipment.

Altronix PMK2 outdoor pole mount kit is designed to simplify overall installation of Altronix WP2 NEMA rated enclosure. It can be mounted to any 2"- 8" (diameter) pole or 5" square pole.

Altronix RE2 Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries that can be connected in various configurations for either 12VDC or 24VDC applications.

Altronix RSB2 Rocker Switch Bracket houses two (2) rocker switches and can be used for switching the power mains ON and OFF. It is compatible with Altronix enclosures.