Accessories
-
Altronix Network Accessory Kit - Network (RJ-45) - 1640.42 ft Extended Range - Plastic
eBridge100RMT Ethernet over Coax/CAT5e Adapter Kits transmit full duplex data at 100Mbps and pass PoE compliant power over coax 304m, or CAT5e cable up to 500m without repeaters. The adapter kit consists of an eBridge100RM receiver and an eBridge100TM transceiver. These adapters, along with the connected IP camera or edge device, is powered by virtually any midspan or endspan. Remote management functions such as edge device reset, monitoring real-time current draw and port status are possible when coupled with an Altronix NetWay8M/16M Midspan. eBridge100RMT is compatible with Megapixel, HD720, HD1080 and VGA cameras.
Learn More$274.18 -
Altronix IP Access FACP Adapter Kit
Altronix Entrada2DMT and Entrada2DMR adapters are specifically designed to interface with Network Door Controllers. They route power (PoE/PoE+) from a PoE switch or Midspan to the Network Door Controller and accommodate up to two (2) Fail-Secure strikes or Fail-Safe mag locks. The receiver features a supervised Fire Alarm Disconnect which releases locking devices while maintaining power to the Network Door Controller. The Fire Alarm Interface feature allows multiple units to be interconnected enabling any or all to be affected from a single FACP trigger input.
Learn More$217.14 -
Altronix FUSE1 Cartridge - 3.50 A
Altronix FUSE1 Cartridge - 3.50 A Learn More -
Altronix LC2 Standard Power Cord - 6 ft Cord Length
Altronix LC2 Standard Power Cord - 6 ft Cord Length Learn More -
Altronix MM24 Magnet Mount for Enclosure, Backplane - 26 lb Load Capacity - 24 Pack
Mounting Magnet accommodates screws and nylon standoff, to mount various boards/accessories in any metal enclosure. 24 pack.
Learn More -
Altronix Pace1PRD - IP and Hi-PoE over Extended Distance via CAT5e - Network (RJ-45)
The Pace1PRD is a long range Ethernet receiver. It is powered via a NetWay1D Single Port Hi-PoE Injector. The receiver passes Hi-PoE (60W) over the cable to the eBridge200WPM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over structured cable.
Learn More$144.21