Accessories

Introducing the ToughArmor MB839SP-B rugged removable drive bay for 2.5" SATA hard drives and SSDs (9.5mm height). Utilizing the standard PCIe 2.0 interface and taking only a single PCIe expansion slot, the MB839SP-B gives you an additional hot-swappable drive bay for hard disk drives (HDDs) and solid state drives (SSDs) even when your computer does not have an open SATA port or empty drive bay. Because the single PCIe port handles both power and data, there's no additional clutter from SATA data and power cables. Fully supports hot-swapping drives with its removable drive tray.

Convenient Hot Swap Support

MB839SP-B adds full hot-swap support over the PCIe 2.0/3.0 interface, allowing you to add or remove drives in seconds without having to shut down the computer or open the case. Hot-swap supports prevents downtime when upgrading storage or replacing a failed drive, and allows a technician to work more efficiently. Hot-Swap ready connector rated for 10,000 insertion / removal cycles allows drives to be installed, removed, and replaced without shutting down the system.

Efficient Storage Solution

Add an additional HDD or SSD to your desktop computer by utilizing your unused PCIe expansion slots. Using the PCIe interface lets you exceed your computers usual drive limitations by giving you an extra removable SSD/HDD drive bay.

ToughArmor MB839SP-B is designed for the PCIe 2.0 and 3.0 single-channel (x1) interface, and for maximum compatibility, it's also compatible with PCIe x4, x8, and x16 full-length PCIe slots.

The Protection You Need

Ruggedized full-metal chassis, tray, and mounting bracket help to ensure a long product life, and further aid in heat dissipation. An anti-vibration mechanism built into the chassis reduces noise and protects against environmental damage.

Large ventilation holes on both sides of the enclosure work with your systems cooling system to keep your drives cool under load. The single-slot width is narrow enough to enable cooling even when multiple bays are installed side-by-side.

MB839SP-B is equipped with a built-in LED on the tray which can show drive power/access LED light.

For easier drive status monitoring, connect your computers/server drive power/access LED light to the 2-pin HDD status header (cable not included), to easily see when your drive is in use from the front of the computer.

Packed with Features

Utilizing the PCIe 2.0 interface allows for a huge speed improvement over older PCs and Mac Pro 2008-2012 models which only natively support SATA II speeds, allowing you to take advantage on the huge speed improvements of modern SSDs.

Utilizing the PCIe 2.0 interface provides power and data transfer at the same location which ultimately reduce cable clutter in a PC case.

Introducing the ToughArmor MB411SPO-B, a full metal 2.5" SATA/SAS hard drive mobile rack designed for use in any slim ODD/FDD bay. The MB411SPO-B uses full metal construction to ensure maximum device lifespan and is capable of withstanding the harshest environments. The EZ Slide Micro tray provides hot-swap ability for hassle-free drive maintenance. Utilizing its ultra low profile design, the MB411SPO-B is a perfect storage device for system that has limited space but also requires data storage such as OEM/ODM systems, embedded control systems, factory automation systems, rackmount computers, rackmount servers and IPCs.

Almost as Slim as 2.5" Drive

The ToughArmor MB411SPO-B is designed amazingly slim and able to keep its size as small as 2.5" HDD, which makes it a complete space saver for any enterprise systems. This small form factor design allows MB411SPO-B to fit in any system that has tight space constraints such as mobile computers and embedded systems. It is also a great 2.5" mobile rack for any OEM / ODM systems that have space limitation, as system builders can easily configured their storage needs with MB411SPO-B, without wasting unnecessary space from the system.

Designed for Slim ODD & Slim FDD Bay

The MB411SPO-B is designed to fit both slim ODD and FDD bay. To use with slim FDD bay, simply unscrew three screws from metal ODD bracket and then remove the ODD bracket from the device and ready to use. With MB411SPO-B, you can quickly add a 2.5" SATA HDD / SSD to any system that has slim ODD or slim FDD bay. Or replace it with existing slim ODD / FDD device and upgrade to 2.5" solid state drive for significantly improve your overall system performance.

Removable Design with Exceptional Build Quality

The EZ Slide Micro tray supports hot-swap and makes maintenance completely hassle free in the event of a hard drive failure. With a simple swap of the hard drive, your overall down time is greatly reduced which is especially useful for time sensitive projects and applications. The tray is designed to accommodate a 7 to 9.5mm height hard drive or SSD, creating a 2.5" hot swap bay for any standard 2.5" SATA/SAS drive. Once you close the latch, the eagle-hook lock system keeps drives secured within the enclosure.

Ensuring the material used can be relied upon for many years after its deployment, the MB411SPO-B is capable of holding up in the harshest environments, with heavy duty metal construction throughout the entire device. The ToughArmor's full metal design is perfect for industrial devices that may require a flammability rating since all-metal already complies with flammability requirements. Because of the high build quality, it can be used in various enterprise systems including: military and law enforcement deployment. It can also be used in manufacturing conditions such as embedded control systems and factory automation systems.

ICY DOCK's MB882 series MB882SP-1S-1B 2.5" to 3.5" SSD & SATA HDD Converter can convert most of 2.5" SATA and SSD hard drive into a 3.5" SATA drive. It has enough ventilation to keep the 2.5" drive cool and can protect your drive. Installing a 2.5" drive requires no screws or tool whatsoever. Whether you use a SATA or SSD drive, you will maintain the transfer speed while using this case. With this converter, mounting a 2.5" drive into a desktop will be simple without having to purchase any special attachments or systems, allowing more convenience in recovering data from laptops or OS boot up onto a desktop. It is very convenient for gamers and power users who expect SSD speed on their home/ office computers. Mostly, it is designed to fit into most common PC cases, 3.5" HDD duplicator, 3.5" SATA HDD enclosure, mobile rack, and backplane modules without having to purchase any attachments for the 2.5" drives. This state-of-the-art case will revolutionize the way 2.5" drives are presently used.

Introducing the ICY DOCK MB882SP-1S-2B: another milestone in our 2.5" SSD product line. Through manufacturing efficiency, we have managed to redesign the original MB882SP-1S-1B without any sacrifice to our standard of high quality products. The new version is lighter weight for simplicity and cost efficiency. It is very convenient for gamers and power users who expect SSD speed on their home/ office computers. Some other new elements to the converter are viewing slots placed over the SATA connection, allowing the user to verify their HDD or SSD has made a secure connection. This also functions as an extra set of airflow vents for extra cooling with your SSD or HDD. Overall, a lightweight and simplistic design that is perfect for power users, gamers, and average computer users for use in their desktops, media centers, and home servers.

The ICY DOCK ToughArmor EX MB491SKL-B 2.5" mobile rack is built specifically for industrial small form factor systems that require exceptional drive security. It uses heavy duty metal construction, which is considered to already comply with flammability requirements and is capable of withstanding the harshest environments. The metal key lock prevents unauthorized access to your important drives and the thumb screw lock adds extra protection from impact which reduces drive tray vibration, increasing drive stability during transportation. Our removable drive tray allows interchangeability of data between multiple systems.

The ICY DOCK MB491SKL-B supports both SAS and SATA hard drive/SSDs at 6Gbps and is backwards compatible to 3 Gbps drives and hosts. It is an ideal solution for enterprise level small form factor applications since it maximizes the use of space in industrial small PCs, surveillance, embedded systems, automation systems, aerospace systems and mobile DVR systems.

Removable Design with Maximum Protection

The removable drive tray design supports hot-swap and makes maintenance completely hassle free in the event of a hard drive failure. With a simple swap of the hard drive, your overall down time is greatly reduced which is especially useful for time sensitive projects and applications. The trays are designed to accommodate a 7 to 15mm height hard drive or SSD, creating a 2.5" hot swap bay for any standard SATA/SAS drive. While the tray is not installed to the MB491SKL-B, the Anti-Dust Flap helps prevent dust from entering the device.

The metal key lock on the tray prevents unauthorized access your drive. The unique thumb screw design locks the metal tray into the device to minimize the drive vibration, and to prevent accidental drive tray ejection, providing the ultimate protection for your hard drives or solid-state drives.

The removable drive tray design combined with our dual layer drive security system makes the ToughArmor EX MB491SKL-B a great mobile rack for mobile servers and military grade systems.

Convenient Utility with Full Metal Construction

The front of the ToughArmor EX includes a status LED when the drive is powered on, off and accessed. Active Power Technology (APT) allows the status LED to be on only when a hard drive is inserted into the enclosure. We have also included drive ID plugs so users with multiple MB491SKL-B units in their system can give each drive tray a unique ID number.

Ensuring the material used can be relied upon for many years after its deployment, the MB491SKL-B is capable of holding up in the harshest environments, with heavy duty metal construction throughout the entire device. The ToughArmor EX's full metal design is perfect for industrial devices that may require a flammability rating since all-metal already complies with flammability requirements. Because of the high build quality, it can be used in various enterprise systems including: military and law enforcement deployment. It can also be used in manufacturing conditions such as embedded control systems and factory automation systems such as: military and law enforcement deployment.

Drive Tray

EX-Secure Mini Tray MB491TKL-B Drive Tray for ToughArmor EX MB491SKL-B