Accessories

These antennas are designed for covert use in any type of embedded/surface application such as ATM machines, remote credit card processing, wireless kiosks, telemetry radios, and in non-metallic metal NEMA boxes.

These antennas operate on dual band configurations and can be used for Cellular GSM/CDMA modem applications. Models are also available for ISM 915 MHz modems. Models are available for 2.4 GHz WiFi (802.11 b/g) and dual-band 2.4/5 GHz (802.11n).

These antennas are compact, yet provide 2.5 dBi gain performance. The antennas are ground plane independent and can be mounted in a variety of locations. They can be installed behind rearview mirrors, under a dashboard or rear window deck/shelf. Since they are thin, they can also fit into the molding of vehicles, surface or subsurface mount in various electronic equipment.

The CVS antennas are weather resistant with a dust/water ingress rating of IP67. They are provided with double sided tape and a mounting clip for standard installation applications. They can be installed without the mounting clip by simply using the double sided tape.

When mounting the antenna, care should be taken to ensure the antenna is positioned so that no metal or metallized finish obstructs the radiation pattern of the antenna.

The CVS series is housed within a black ASA rugged radome and is provided with 8 ft of RG-174 cable (2.5 meters). Models are typically outfitted with SMA Plug (Male) connectors. Other connectors are available upon request.

The CVS series is also available with an integral GPS antenna in a slightly larger package.

The ECO9-4700 covers 4.4-5.0 GHz. It was designed specifically for Military applications in the 4.4-4.9 GHz band or for Public Safety ap - plications at 4.9 GHz. The antenna offers easy installation, compact size and efficient electrical performance.

The ECO Series are free space antennas; no ground plane is required so the antenna can be mounted just about anywhere. Standard mounting hardware is included for pole or wall mounting. A Stainless Steel saddle is also included to accommodate installation settings of different sizes

There are three connection options available. The ECO9 typically terminates with an integrated N-jack (female) connector at the base of the antenna.

Alternatively, the "PT" model terminates with a pigtail cable. The PT option provides a direct coax into the antenna and can be outfitted with a variety of connectors such as a Reverse Polarity TNC. Cable assemblies are commonly used with this option.

A third option, the "RN" model, terminates with a recessed N-plug (male) connector built into the base of the antenna. These antennas are typically attached directly to a device or installation box.

Cable assemblies are available from Mobile Mark to connect the site antenna to the modem. These cable assemblies can be custom produced for any length.

Mobile Mark's new LLP202 is a two cable variant of our new lower profile surface mount antenna design. This antenna has two identical cables for Global LTE capability on the 694-960 MHz and 1710-3700 MHz bands.

Gain for the LLP202 ranges from -1 to 4 dBi depending on the frequency being used. The lower profile design makes it perfect for any surface mounted wireless application that requires high performance in a low profile package.

LTE MIMO (multiple-input-multiple-output) modems of - fer greater speed and capacity than earlier generations of modems. In order to ensure optimum performance the LTE MIMO system needs multiple antennas on both the transmis - sion and receive ends.

Measuring 9.00" (22.8cm) x 3.50" (8.9cm) in diameter with a low profile of 1.25" (31.8mm), the LLP602 series antennas take up significantly less space than multiple antennas. The radome is available in black and white.

This antenna is not available as a mag mount.

The LLP302 introduces a new lower profile antenna design that can facilitate up to 3 cables. It comes equipped with two connections for Global LTE (694-3700 Mhz), and one GPS connection (1575 MHz). This lower profile design is a perfect fit for surface mounted applications that require combined functionality for several wireless frequencies.