Power Injectors/Splitters
-
Perle INJ PoE Injector - 54 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 30 W - Gray
INJ 1000 PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable.
Generating up to 60 Watts, the INJ 1000 provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE.
With the INJ 1000, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
Learn More$518.43 -
Perle INJ 1010 PoE Injector - 24 V DC, 48 V DC Input - 54 V DC Output - 60 W - Gray
INJ 1000 PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable.
Generating up to 60 Watts, the INJ 1000 provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with theIEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).Learn more about PoE.
With the INJ 1000, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
Learn More$541.19 -
Perle INJ PoE Injector - 54 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 60 W - Gray
INJ 1000 PoE Injectorsare DIN Rail mounted single port,PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to injectfully compliantpower over the Ethernet cable.
Generatingup to 60 Watts, the INJ 1000 provides electrical power to remotePD access points,pan-tilt and zoom (PTZ) camerasandvideo-phones. It complies with theIEEE802.3bt Hi-PoE (60W of power)orIEEE 802.3at PoE+ (30W of power)standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).Learn more about PoE.
With the INJ 1000, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
Learn More$642.68 -
StarTech.com 2-Port PoE+ Injector, 10/100/1000Mbps, PoE/PoE+ (802.3af/802.3at), 30 Watt, 1Gbps Ethernet, Wall Mountable, Unmanaged - 2-Port multi-speed PoE+ injector; Unmanaged inline injector supports PoE/PoE+ (802.3af/802.3at) up to 30W - Multiple speed
This 2-port multi-speed PoE+ injector serves as Power Sourcing Equipment (PSE) and enables Ethernet speeds of 10/100/1000Mbps. This mid-span inline injector can transmit network data and power up to 328ft (100m) for two Powered Devices (PD).
Versatile PoE Injector
Dual-port PoE injector supports the IEEE 802.3af and IEEE 802.3at PSE standards and delivers up to 30W output (52V/0.580A). Connect a remote PoE device to a network at a location where there is no power source, but an Ethernet cable already exists. This includes access points, IP cameras, VoIP phone systems, IPTV and access controls. The flexible design allows for either desktop or surface-mount use.
Streamlined Cable Management
All Ethernet cables can be routed from one side of the unit for efficient and organized cable management. The compact design (3.2x1x1.8in(82x25x46mm) ensures straightforward integration into existing network infrastructure, saving space and time during installation.
Learn More -
StarTech.com 1-Port 10Gbps Gigabit PoE++ Injector, 60W, 2.5/5/10G Ethernet/10/100/1000M, PoE++ (802.3af/at/bt), Wall Mountable, Unmanaged - Unmanaged 1-Port 10Gbps Inline PoE++ Injector supports up to 60W/PoE/PoE+/PoE++ (802.3af/at/bt) - Multiple speed Po
This 1-Port multi-speed PoE++ Injector serves as a Power Sourcing Equipment (PSE) device and enables Ethernet speeds of 10/100 Mbps/1000Mbps and 1/2.5/5/10Gbps. This TAA-compliant mid-span inline injector can transmit network data and power up to 328ft (100m) for single Powered Devices (PD).
Versatile PoE Injector
Single port PoE+ injector supports the IEEE 802.3af and 802.3at PSE standards, and delivers up to 60W output (54V, 1.11A). Connect a remote PoE device to a network at a location where there is no power source, but an Ethernet cable already exists. This includes access points, IP cameras, VoIP phone systems, IPTV and access controls. The flexible design of the PoE injector allows for either desktop or surface-mount use.
Streamlined Cable Management
All Ethernet cables can be routed from one side of the unit for efficient and organized cable management. The compact design (4x2.3x1.3-inch / 100x58.4x33.4mm) ensures straightforward integration into existing network infrastructure, saving space and time during installation.
Learn More$101.38 -
TP-Link POE4818G Omada 48V 18W Passive PoE Adapter - 120 V AC, 230 V AC Input - 48 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 18 W
Passive PoE Adapter
Powers TP-Link products that support 48V passive PoE POE4818G
Power Your Devices
Use the passive PoE adapter POE4818G to simultaneously supply power and transmit data to a passive PoE device.
Convenient Wall-Mounting Design
POE4818G offers a convenient wall-mounting brackets to be easily installed on a wall.
Compatible Devices
POE4818G is recommended to offer power supply to TP-Link's passive PoE products which as follows.
Learn More