Power Injectors/Splitters
-
Tycon Power Passive POE Injector, Puts Power on Both RJ45 Female and Male On Pins 4,5,7,8 - 60 V DC Input - 60 V DC Output - 1 x 10/100Base-TX Input Port(s) - 1 x 10/100Base-TX Output Port(s)
The POE-YINJ-S accepts power on the 5.5x2.1mm Female DC Jack and puts the power on both RJ45
Learn More -
Tycon Power Passive Y Splitter - 5.5/2.1mm DC Plug - 60 V DC Input
POE Splitters are used to take the power supplied from a POE power supply and split off the data and DC power into separate connectors. These splitters are mainly used for powering legacy devices which are not POE enabled but instead get their power from a DC connector. The POE Y Splitters are useful when two devices need remote power, one device being POE enabled to accept power thru the RJ45 and the other device requiring DC power thru a DC connector. The overall length of these devices is 10 inches. The RJ45 Jack is a high quality CAT5 rated jack for high speed data.
Learn More -
Tycon Power Gigabit +/- 36-72VDC Input, 56V 35W 802.3at POE Output - 56 V DC, 625 mA Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 35 W
Tycon Power Gigabit +/- 36-72VDC Input, 56V 35W 802.3at POE Output - 56 V DC, 625 mA Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 35 W Learn More -
Tycon Power Gigabit 48VDC 802.3at Input, 12VDC @ 2.1A 25W Output - 48 V DC Input - 12 V DC, 2.10 A Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 25 W
The POE-SPLT Active splitters are unique Power Over Ethernet adapters which converts a DC POE input voltage to AC or DC regulated output voltages. The output is provided on a standard 5.5mm/2.1mm barrel connector on a 14" cable or in the case of the 80W unit, on a wire terminal connector. Ethernet speeds of 10/100MB and 10/100/1000MB are available. Inputs and outputs are isolated. They have various protections for surge, short circuit, overload and overvoltage.
Learn More -
Tycon Power DC to DC Converter - 36 V DC Input - 24 V DC, 800 mA Output - Ethernet Input Port(s) - Ethernet Output Port(s) - 19 W
The TP-DCDC Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 18V to 48VDC Power Over Ethernet voltage from a 12 or 24V battery system. They have an integrated POE injector to apply the 48VDC to the CAT5 Ethernet cable. The output is regulated 18V, 24V or 48VDC from an input voltage between 9VDC and 36VDC. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications.
Learn More
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). An IEEE 802.3af compliant model is available for those applications requiring 802.3af handshake.
They have various protections for surge, short circuit and overload. The units have power output up to 24W. -
Tycon Power Gigabit DC to DC Converter - 9 V DC, 36 V DC Input - 24 V DC, 800 mA Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 19 W
Description
The TP-DCDCGigabit Seriesof DC to DC converters offered by Tycon Power Systems are a low cost and high efficiency solution for those requiring IEEE802.3af and IEEE802.3at or Passive Power over Ethernet from a 12VDC or 24VDC or 48VDC voltage source like a battery system or vehicle. They have an integrated POE injector to apply the power and data output to the CAT5 Ethernet cable. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications.
Learn More
They accept gigabit data-into a shielded RJ45 Jack and provide gigabit data-out and PoE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have power outputs up to 35W.