Switches & Bridges

Items 31 to 36 of 42 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  • Intellinet 16-Port Gigabit Ethernet Switch - 16 Ports - Manageable - Gigabit Ethernet - 1000Base-T - 2 Layer Supported - 10.10 W Power Consumption - Twisted Pair - Rack-mountable, Desktop

    Boost your network speed

    The Intellinet Network Solutions Gigabit Ethernet Switch offers an array of features while providing superior network throughput.

    Auto Features

    This Gigabit LAN switch includes many automatic features that make it easy to use. No configuration is required, so installation is Plug and Play and hassle-free. Auto-MDI/MDI-X crossover on all ports eliminates the need for any crossover cables. Each of the 16 ports automatically senses the link speed of the connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.

    Extreme Throughput

    With a backplane speed of 32 Gbps, there is plenty of performance available for your computers, servers and other networking devices.

    Reliable Operation

    This network switch supports flow control when operating in half-duplex mode and IEEE 802.3ab in full duplex mode to ensure that data transfer and network connectivity run smoothly and uninterrupted. In conjunction with the broadcast storm control and the store-and-forward switching method, full- and half-duplex modes further ensure that your connections remain active even under extremely busy conditions.

    Green Ethernet Technology

    More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer, notebook, network printer or other network-connected device is powered down, the switch continues to consume the same amount of power as if it were active. Thanks to the energy-efficient IEEE 802.3az technology, the Intellinet Network Solutions 16-Port Gigabit Switch detects link status to all connected devices and reduces the power usage of ports that are not in use. In addition, it can adjust the level of power output based on the length of the network cable connected to a particular port. This feature allows for the enjoyment of maximum network performance, and when things slow down, it automatically scales back power usage to conserve energy and save money.

    Learn More
    $114.99

  • Intellinet 5-Port Gigabit Ethernet PoE+ Switch with SFP Port - 5 Ports - Gigabit Ethernet - 10/100/1000Base-T, 100Base-TX - 2 Layer Supported - 96 W Power Consumption - 91 W PoE Budget - Twisted Pair - PoE Ports - Desktop, Wall Mountable - 3 Year Limited

    Desktop 5-Port PoE Switch with Gigabit Uplinks - Supports 10/100/1000 Mbps, Power over Ethernet 802.3at

    The 5-Port Gigabit Ethernet PoE+ Switch with SFP Port from Intellinet Network Solutions passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports - four of which are high-power PoE+ PSE ports - this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.

    High-power PoE+ with output up to 30 watts

    This switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and highvoltage protection function, your equipment is well-protected.

    Gigabit Uplinks

    The switch is equipped with one Gigabit RJ45 and one SFP transceiver module slot. These Gigabit uplink ports are ideal for connecting the switch to the network's backbone, a server or, perhaps, your video recording solution (NVR).

    Wall-mount option

    For full installation flexibility, you can mount the switch on the wall through its four built-in holes or use the included non-slip rubber feet to place it on a desktop.

    Features:

    • Provides up to four PoE network devices with power and data
    • Four 10/100/1000 Mbps IEEE 802.3at/af-compliant RJ45 PoE ports, one gigabit RJ45 port and one gigabit SFP port
    • PoE power budget of 91 watts
    • Power output up to 30 watts per port
    • Saves installation costs by delivering data and power over existing network cables
    • Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g., wireless access points, VoIP phones, IP cameras)
    • Supports IEEE 802.3at/af detection and short circuit, overload and highvoltage protection
    • 12 Gbps switch fabric
    • 10/100/1000 auto-sensing ports that automatically detect optimal network speeds
    • Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
    • Store and forward switching architecture
    • IEEE 802.3x flow control for full duplex
    • Supports 2k MAC address entries
    • Compact desktop format with rugged metal housing
    • Grounding point to protect equipment from external electrical surges
    • Mounting holes for wall mounting
    • Rubber feet for non-slip desktop use
    • Fanless design ideal for silent operation
    • Three-year warranty

    Learn More
    $137.99

  • Intellinet 5-Port Gigabit Ethernet PoE+ Switch - 5 Ports - Manageable - Gigabit Ethernet - 1000Base-T - 2 Layer Supported - 65 W Power Consumption - 62 W PoE Budget - Twisted Pair - PoE Ports - Desktop

    Desktop 5-Port PoE Switch - Supports 10/100/1000 Mbps, Power over Ethernet 802.3at

    The 5-Port Gigabit Ethernet PoE+ Switch from Intellinet Network Solutions passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports - four of which are high-power PoE+ PSE ports - this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds up to 1000 Mbps.

    High-power PoE+ with output up to 30 watts

    This switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.

    Learn More
    $105.99

  • Intellinet 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports - 24 Ports - Gigabit Ethernet - 10/100/1000Base-T, 1000Base-X - 2 Layer Supported - 2 SFP Slots - 400 W Power Consumption - 370 W PoE Budget - Twisted Pair, Optical Fiber - PoE Ports - Rack-

    Unmanaged PoE Switch with 26 ports - 24 RJ45 and Two SFP, High-Power PoE+

    The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds up to 1,000 Mbps.

    Power over Ethernet 802.3at

    This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch need no additional power to help avoid the time and expense of electrical rewiring and minimize the unsightly clutter of power supplies and adapters on ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

    Eliminate Bottlenecks with 26 Gigabit Ports

    Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable (SFP) GBIC module slots provide fiber connectivity for greater distances. These are not shared combo-ports but true Gigabit ports, pushing the total available bandwidth up to 52 Gbps.

    Learn More
    $356.89

  • Intellinet 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports - 24 Ports - Gigabit Ethernet - 10/100/1000Base-T, 1000Base-X - 2 Layer Supported - 2 SFP Slots - 400 W Power Consumption - 370 W PoE Budget - Twisted Pair, Optical Fiber - PoE Ports - Rack-

    Power over Ethernet Switch with 26 ports - 24 RJ45 and Two SFP, High-Power PoE+, PD Alive, VLAN and PoE Extend Mode

    The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds up to 1,000 Mbps.

    Power over Ethernet 802.3at

    This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch need no additional power to help avoid the time and expense of electrical rewiring and minimize the unsightly clutter of power supplies and adapters on ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

    Eliminate Bottlenecks with 26 Gigabit Ports

    Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable (SFP) GBIC module slots provide fiber connectivity for greater distances. These are not shared combo-ports but true Gigabit ports, pushing the total available bandwidth up to 52 Gbps.

    Self-Healing Network with increased reliability and stability - Intellinet Powered Device Monitor (PDM)

    This Power over Ethernet switch has a self-healing PoE function called "Powered Device Monitoring." This PoE watchdog does a PD alive check on all connected PDs and automatically resets devices that aren't responding, like PoE security cameras, by cutting power and then turning it back on. The PDM function is especially useful in industrial or surveillance settings where devices connected to the network are important to how it works. As an added bonus, the PD Alive function helps cut down on unnecessary technical support calls and expensive field trips by field-support engineers. This is because the functional reboot can often bring the unresponsive device back online.

    PoE Extend Mode ideal for IP cameras

    Selectable with a convenient slide switch on the front panel, you can manually activate a "PoE Extend Mode" that reduces your network speed and extends your PoE range up to 250 m (820 ft.), which is ideal to deliver power and data to IP cameras over longer distances.

    Learn More
    $537.99

  • Intellinet 5-Port 2.5G Ethernet PoE+ Switch - 5 Ports - Gigabit Ethernet, 2.5 Gigabit Ethernet - 10/100/1000Base-T, 2500Base-T - 58 W Power Consumption - 55 W PoE Budget - Twisted Pair - PoE Ports - Desktop, Wall Mountable - TAA Compliant

    Next-gen 2.5 Gbps Desktop 5-Port PoE Switch - Supports 10/100/1000/2500 Mbps, Power over Ethernet 802.3at

    The 5-Port 2.5G Ethernet Unmanaged PoE+ Switch from Intellinet Network Solutions passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five multi-gigabit Ethernet PoE+ copper ports, this Switch can power wireless LAN bridges, VoIP phones and more while delivering network speeds up to 2500 Mbps.

    Eliminate bottlenecks with 2.5G capability - great for high-bandwidth Wi-Fi 6 IEEE 802.11ax Access Points and more

    Since at least the arrival of Wi-Fi 6 (but even with legacy Wi-Fi 5 [802.11ac]), "regular" Gigabit Ethernet ports have been at their bandwidth limits when connecting to wireless networks. This Switch's ability to support 2.5GBASE-T means it can deliver data to wireless APs faster and better accommodate other higher-bandwidth devices in your enterprise network.

    High-power PoE+ with output up to 30 watts

    This switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.

    Learn More
    $164.33

Items 31 to 36 of 42 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7