Audio & Video Consoles/Extenders
-
NVT Phybridge Single Channel Passive Video Transceiver - 39.37" Range - 1 x Network (RJ-45) - Twisted Pair
NV-217J-M Single Channel Passive Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) data wire. Baseband (composite) signals of any type are supported.
The passive NV-217J-M features a RJ45 connection and Male BNC allowing connection directly to the camera or DVR. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Phybridge Receiver, yet is compatible with all of NVT Phybridge's passive products for applications under 750ft (225m). The NV-217J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-217J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
Learn More -
NVT Phybridge NV-218A-PVD Video Transceiver - 3280.84 ft Range - 1 x Network (RJ-45) - Twisted Pair - Category 5
Model NV-218A-PVD Video Transceiver with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
This product incorporates the transceiver engine of NVT Phybridge's popular NV-214A-M video transceiver with the added value of Power and Data connections to and from the camera. Power, Video and Data are routed via UTP and RJ45 or screwless terminal block inputs/outputs. Used at the camera, the passive NV-218A-PVD has a 9" mini-coax mini lead for direct video output connection from the camera. Along side this coax lead are two sets of screwless terminal blocks for quick pass through connections for your camera's Power and Data. On the "house" or output side of the product you have the option of using convenient screwless UTP connectors or the more efficient RJ45.
The unparalleled interference rejection and low emissions of the NV-218A-PVD allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The NV-218A-PVD carries a limited lifetime warranty and is UL and cUL listed.
Learn More -
NVT Phybridge UTP Video Transmitter +12VDC Converter - 3280.84 ft RangeNetwork (RJ-45) - Twisted Pair - Category 5
Features:
- Extended distance camera power and video routed through UTP and RJ45
- Supports 12VDC cameras with onboard regulated power
- Use with NVT's PVD™ Power Supply Hubs and Cable Integrators
- Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
- Up to 1,500ft (460m) with a NVT StubEQTM Hub
- Frequency response DC to 10MHz (see Recommended Distance Chart)
- Up to 750ft (225m) with NVT's Passive Receiver Hubs (see Power Distance Chart)
- Exceptional interference rejection
- Built-in transient protection
- Limited lifetime warranty
The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and lowvoltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.
The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant. Learn More -
NVT Phybridge 32-Channel Video Transceiver Hub - 3280.84 ft Range - 8 x Network (RJ-45) - Twisted Pair - Category 5 - Rack-mountable, Wall Mountable, Desktop
Features:
- High-Density 19" 1U high enclosure features 32 ports
- Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver for full motion CCTV at distances up to 750ft (225m)
- Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km) Use with any NVT StubEQTM for distances up to 1,500ft (460m)
- RJ45 video connectivity with optional NV-RJ45A RJ45 to screw terminal adaptors (included)
- No power required
- Exceptional interference rejection
- Built-in transient protection
- Supports "up-the coax" type control signal up to 750ft (225m)
- Compatible with qualified UTP cameras
- Includes thirty-two 2ft (60cm) coax jumper cables and rackmount hardware
- Limited lifetime warranty
"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-3213 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated. Learn More$2,189.50 -
NVT Phybridge 32-Channel Video Transceiver Hub - 3280.84 ft Range - 8 x Network (RJ-45) - Twisted Pair - Category 5 - Rack-mountable, Wall Mountable
Features:
- Compact rack mountable 19" 1U high enclosure features 32 channels and only 1.54" (40mm) deep
- Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
- Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
- Use with any NVT StubEQTM for distances up to 1,500ft (460m)
- RJ45 video connectivity with optional NV-RJ45A RJ45-to-screw terminal adaptors (included)
- No power required
- Exceptional interference rejection
- Built-in transient protection
- Supports "up-the coax" type control signal up to 750ft (225m)
- Compatible with qualified UTP cameras
- Limited lifetime warranty
"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-3213S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated. Learn More$1,492.10 -
NVT Phybridge 32-Channel StubEQ Active Receiver Hub - 1509186.35 ft Range - 8 x Network (RJ-45) - Twisted Pair - Category 5 - Rack-mountable, Wall Mountable, Desktop
Features:
- Adaptive StubEQTM fully automatic 2-band equalization provides adjustment-free equalization every time
- Compact rack-mountable 19" 1U high enclosure features 32 channels
- Full motion CCTV video at distances up to 1,500ft (460km) when used with any passive NVT transceiver or hub; 2,000ft (600m) when used with the NV-653T active transmitter
- RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
- Exceptional interference rejection
- Built-in transient protection and ground-lifting
- Compatible with qualified UTP cameras
- Includes rack mount hardware and eight NV-RJ45A adaptors
- Limited lifetime warranty
$4,054.64
