Audio & Video Consoles/Extenders
-
ComNet HDMI Transmitter - Single Channel - 1 Input Device - 3280.84 ft Range - 1 x HDMI In - 1 x ST Ports - Full HD - 1920 x 1080 - Rack-mountable
The ComNet™ FVT/FVR(X)MI[/M] features an HDMI™ fiber link for uncompressed high-resolution bi-directional communication with full HDCP copyright protection, EDID and CEC connection functionality. The high-resolution signal is transmitted over one multimode fiber using multiple wavelengths up to 1000m. Resolutions of up to 1080p60 are supported. HDCP encryption is not affected or compromised by the FVT/FVR(X)MI units. The FVT/FVR(X)MI[/M] transmits pixel-for-pixel images and full 24-bit scan rate with no contouring or bit reduction. This unit is fully compatible with HDMI™ compliant sources and monitors, supporting all possible horizontal and vertical sync configurations. The CEC support provided by these units allows the user to communicate with up to ten CEC-enabled devices connected via HDMI™. The FVT/FVR(X)MI[/M] transmits up to 8 channels of uncompressed audio at sample sizes of 16-bit, 20-bit and 24-bit, with sampling rates of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz. This series also supports any IEC 61937-compliant compressed audio stream, such as Dolby Digital and DTS , and up to 8 channels of one-bit DSD audio, as used on SA CD/Super Audio CDs, and at rates up to four times that of Super Audio CD, and lossless compressed audio streams such as Dolby True HD and DTS -HD Master Audio. A locking screw prevents the connectors from accidental disconnection. Packaged in either a small stand-alone housing or the exclusive ComNet ComFit housing, the FVT/FVR(X)MI standard size product may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Learn More$1,310.65 -
ComNet FVTXA4C1M Audio Extender Transmitter - 4 Input Device - 1 Output Device - 9842.52 ft Range - Optical Fiber - Surface-mountable, Rack-mountable, Wall Mountable
The ComNet™ FVT/FVRXA4C1 series audio multiplexer provides the transmission of four audio signals and one bi-directional contact closure over one multimode or single mode optical fiber. The modules use 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators confirm equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Learn More$1,592.68 -
ScreenBeam 960 Wireless Display Receiver for Small Business - Without apps or cables, ScreenBeam 960 lets you wirelessly connect to the room display and share content using native screen mirroring on your Windows, Apple and Android devices.
ScreenBeam 960 makes it easy to create an interactive digital workspace by connecting your device to the room display without apps, cables or wires. Extended desktop allows presenters to run additional tasks and actions while presenting, while interactive touch displays and wireless touch enables presenters and viewers to interact with the front-of-room display. Central Management System (CMS) software is included for remote management of receivers, providing enterprise-class security and manageability for a single IT professional or employee.
Learn More$323.31 -
NVT Phybridge UTP Video Transmitter +12VDC Converter - 3280.84 ft RangeNetwork (RJ-45) - Twisted Pair - Category 5
Features:
- Extended distance camera power and video routed through UTP and RJ45
- Supports 12VDC cameras with onboard regulated power
- Use with NVT's PVD™ Power Supply Hubs and Cable Integrators
- Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
- Up to 1,500ft (460m) with a NVT StubEQTM Hub
- Frequency response DC to 10MHz (see Recommended Distance Chart)
- Up to 750ft (225m) with NVT's Passive Receiver Hubs (see Power Distance Chart)
- Exceptional interference rejection
- Built-in transient protection
- Limited lifetime warranty
The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and lowvoltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.
The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant. Learn More -
NVT Phybridge NV-218A-PVD Video Transceiver - 3280.84 ft Range - 1 x Network (RJ-45) - Twisted Pair - Category 5
Model NV-218A-PVD Video Transceiver with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
This product incorporates the transceiver engine of NVT Phybridge's popular NV-214A-M video transceiver with the added value of Power and Data connections to and from the camera. Power, Video and Data are routed via UTP and RJ45 or screwless terminal block inputs/outputs. Used at the camera, the passive NV-218A-PVD has a 9" mini-coax mini lead for direct video output connection from the camera. Along side this coax lead are two sets of screwless terminal blocks for quick pass through connections for your camera's Power and Data. On the "house" or output side of the product you have the option of using convenient screwless UTP connectors or the more efficient RJ45.
The unparalleled interference rejection and low emissions of the NV-218A-PVD allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The NV-218A-PVD carries a limited lifetime warranty and is UL and cUL listed.
Learn More -
NVT Phybridge Single Channel Passive Video Transceiver - 39.37" Range - 1 x Network (RJ-45) - Twisted Pair
NV-217J-M Single Channel Passive Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) data wire. Baseband (composite) signals of any type are supported.
The passive NV-217J-M features a RJ45 connection and Male BNC allowing connection directly to the camera or DVR. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Phybridge Receiver, yet is compatible with all of NVT Phybridge's passive products for applications under 750ft (225m). The NV-217J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-217J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
Learn More